The *NEW* Good Morning Thread!
My Husqvarna 445 uses this tool. 21-teeth (splines)
Good morning everyone.
Heard the alarm at 215 and just wasn't feeling it. Even got up and had breakfast, then decided I really wasn't feeling it and went back to bed for a couple hours. Made a world of difference. The only bad thing was I had to hear the alarm twice.
So at 4 I get up and ready to jump in the shower. I get the water going to the right temp, turn the diverter valve thing and I hear this clunk, and the pressure goes to part power. Temp was fine, just reduce pressure. So after I got dressed I ran all around the house looking for a water leak. None. In fact, full pressure at all the other water outlets. So here's a question. Do the water valves have a fail safe built in that will limit pressure when they are about ready to fail? I've had a drip from the hot water valve in the shower for a few days. Lately though it hasn't been leaking, but I wonder if valve somehow went tango uniform and it's limiting pressure. Still no leak, though. Who the hell knows. Hm I didn't think to go back to the shower to see if it was working regular again. Maybe it was just a fluke. Not a meter.
Overtime people built up a lot of wheels this morning. Barring anything unforeseen we should do okay today with our 10 extra. He's already rumbling about double time on Sunday. I wouldn't mind that. Gotta do floors at Mom's now so some double time would help out there.
Chris any word on the car? Have you been sweeping and cleaning the garage getting ready for the grand return? I think your shoulder needs a hot tub.
Got 7 wheels signed already, probably what I would have signed on overtime. Hope it keeps up.
Have a good day everyone.
Heard the alarm at 215 and just wasn't feeling it. Even got up and had breakfast, then decided I really wasn't feeling it and went back to bed for a couple hours. Made a world of difference. The only bad thing was I had to hear the alarm twice.
So at 4 I get up and ready to jump in the shower. I get the water going to the right temp, turn the diverter valve thing and I hear this clunk, and the pressure goes to part power. Temp was fine, just reduce pressure. So after I got dressed I ran all around the house looking for a water leak. None. In fact, full pressure at all the other water outlets. So here's a question. Do the water valves have a fail safe built in that will limit pressure when they are about ready to fail? I've had a drip from the hot water valve in the shower for a few days. Lately though it hasn't been leaking, but I wonder if valve somehow went tango uniform and it's limiting pressure. Still no leak, though. Who the hell knows. Hm I didn't think to go back to the shower to see if it was working regular again. Maybe it was just a fluke. Not a meter.
Overtime people built up a lot of wheels this morning. Barring anything unforeseen we should do okay today with our 10 extra. He's already rumbling about double time on Sunday. I wouldn't mind that. Gotta do floors at Mom's now so some double time would help out there.
Chris any word on the car? Have you been sweeping and cleaning the garage getting ready for the grand return? I think your shoulder needs a hot tub.
Got 7 wheels signed already, probably what I would have signed on overtime. Hope it keeps up.
Have a good day everyone.
The guy called me in the early afternoon yesterday and told me the car would not be done yesterday because he was not going to be able to get his hands on some of the parts until later in the afternoon. He said probably today. I said no rush. Today really is not good for me to pick it up because my wife will be gone doing a quick in home furniture restoration for a woman and my wife doesn't really know when she'll be home to pick me up and run me to the car to pick it up. Kinda just gonna have to play it by ear. Won't break my heart if it's not today because of the logistics situation.
Frank Chiechi
Last edited by 1969w3155; August 20th, 2024 at 12:57 PM.
Good for you Dan! Glad you're getting it out already and enjoying it! Sounds like the minor issues should be easily addressed. 👍
Good afternoon guys,
4-4-2 Repairs Update:
Well, as it turns out, the rear axle with the destroyed bearing was determined not to be salvageable after the bad bearing was cut off. The man working on my car went to Columbia, MO 104-miles away to pick up an entire '67 rear end and he will use one of the axles for my car. Obviously not going to be done today. I don't have a problem with that at all because it was going to be later before I could get up to his place today anyway, and I don't enjoy driving the car after dark because of the dim old fashioned headlights. That's where we're at.
Hope everyone has had a great day!
4-4-2 Repairs Update:
Well, as it turns out, the rear axle with the destroyed bearing was determined not to be salvageable after the bad bearing was cut off. The man working on my car went to Columbia, MO 104-miles away to pick up an entire '67 rear end and he will use one of the axles for my car. Obviously not going to be done today. I don't have a problem with that at all because it was going to be later before I could get up to his place today anyway, and I don't enjoy driving the car after dark because of the dim old fashioned headlights. That's where we're at.
Hope everyone has had a great day!
Headlights
Chris - Super easy fix to address the old dim headlamp issue & maintain your original headlamps. Read through this thread. Note both VC455 (Gary) and my posts. You can install either one or two relays and you'll automagically double the brightness - guaranteed. Employing a relay reduces the resistance on that circuit. This is particularly significant for headlamps where/since a heavy load is being applied. Removing this resistance employing one or two relays will double the brightness of your headlamps. And, you won't even see the relay(s).
Headlights
Headlights
Took the '72 for it's first cruise last night, fired up immediately after four days with out pumping the gas. Stopped at my brothers a mere mile and a half away, and went to leave, and I had to crank it a bit. It shouldn't be heat soak,as it never got warm enough, and it was fast cranking, not sluggish. I could feel a little surging while driving, so I'm thinking carb rebuild. Not sure if the previous owner used ethanol treatment or not. I was surprised at how well it moved out with the two barrel, I may keep it, rather than going to a four pot.
Stock OEM iron intake manifold or aftermarket (Edelbrock or otherwise)?
Stock OEM contact points IGN or aftermarket?
A/F mixture look good w/ a vacuum gauge?
Slight/Little surges are an annoyance (PITA) to figure out.
Speaking of heat soak. I had two Harley Davidson motorcycles in the 1970s - Sportsters. I carried an extra set of points everywhere I went. Engines were notorious for heating up in slow riding conditions. Heat caused points cavitation so bad you'd think the points surfaces had melted like solder some times. Craziest $hit I ever saw. Pull off the road, quickly R&R points and back on the road no issues. When the engine started surging I knew it was time to pull over and replace the points. Annoying. Eventually I figured out I had to ride faster than fast everywhere.
4-4-2 Repairs Update:
Well, as it turns out, the rear axle with the destroyed bearing was determined not to be salvageable after the bad bearing was cut off. The man working on my car went to Columbia, MO 104-miles away to pick up an entire '67 rear end and he will use one of the axles for my car. Obviously not going to be done today. I don't have a problem with that at all because it was going to be later before I could get up to his place today anyway, and I don't enjoy driving the car after dark because of the dim old fashioned headlights. That's where we're at.
Car is done and ready to be picked up.
- All new rear brake components, including drums turned and new master cylinders. Emergency brake adjusted.
- The axle he pulled from the whole '67 Rear End he went to pick up in Columbia, MO was fine. Both axles now have new bearings, seals, and retaining flanges. I get to keep anything I want from the whole '67 Rear End he purchased in Columbia. I don't have room for an entire Rear End, but at a minimum I'm taking the other rear axle.
- He said the Posi-carrier and gears all looked fresh with no debris or crud. He cleaned everything and then refilled with new gear oil and posi-additive.
- He noticed one of the rubber exhaust hanger straps near the back had rotted and broke. He replaced them both, because it was only a matter of time before the other was going to break.
- Also, while inspecting the Rear End he noticed one of the rear Coil Springs was not seated in the pocket correctly and he fixed that.
Picking it up tomorrow around 10am.
Good morning everyone.
Felt better at 2 this morning so I got ready and came in. Lots of wheels everywhere and no one to do anything with them. The fire marshal would have a heyday.
Chris that's great news about the car. I'm sure you could find room for that diff, stand it up in the corner. Or put it in the living room as a coffee table.
The weak water pressure persisted in the shower today. But today it got weaker as time went on. It has to be the valve, the pressure is good everywhere else and there are no leaks. Weird.
Dan you can't beat a convertible. Given my choice between a quad and a Rochester 2 Jet I'd take the 2 Jet any day. Simpler, and I think it responds a little better. For regular cruising I don't think the difference is all that much.
Almost time for the real start of the day. We're having a meeting with the new foreman today. He's only been here a few months... Hope everyone has a good Hump Day.
Felt better at 2 this morning so I got ready and came in. Lots of wheels everywhere and no one to do anything with them. The fire marshal would have a heyday.
Chris that's great news about the car. I'm sure you could find room for that diff, stand it up in the corner. Or put it in the living room as a coffee table.
The weak water pressure persisted in the shower today. But today it got weaker as time went on. It has to be the valve, the pressure is good everywhere else and there are no leaks. Weird.
Dan you can't beat a convertible. Given my choice between a quad and a Rochester 2 Jet I'd take the 2 Jet any day. Simpler, and I think it responds a little better. For regular cruising I don't think the difference is all that much.
Almost time for the real start of the day. We're having a meeting with the new foreman today. He's only been here a few months... Hope everyone has a good Hump Day.
Dan great you are out in the wind. Sounds like many smiles to the gallon.
Chris the project sounded like it went well and you will be back in the saddle in no time, awesome.
Norm good to hear you are out enjoying your game
John would you ever consider a battery operated chainsaw if you replace yours, I think they have come a long way lately
Chris the project sounded like it went well and you will be back in the saddle in no time, awesome.
Norm good to hear you are out enjoying your game
John would you ever consider a battery operated chainsaw if you replace yours, I think they have come a long way lately
I misspoke about 1 item when describing the repairs, it was the individual rear wheel brake cylinders replaced as part of the brake job, not the Master Brake Cylinder. It should be an interesting and somewhat anxious ride home, despite the fact I trust the man's work. Leaving to go pick it up around 10am CST, it's about a 50-mile drive to his place. I will update later with a description of how the drive home went.
Mike - You have either one or both scenarios yielding a low pressure shower scenario: (1) The shower head itself is saturated/clogged with mineral deposits/debris; &/or (2) a broken, clogged or misaligned water pressure regulator w/in the shower faucet valve apparatus (where you turn on the shower).
NOTE: There are basically two pressure regulators: (1) One is contained inside the shower head itself - a common area where mineral deposits/debris blocks the pressure regulator. They're often plastic. Remove the shower head, then remove the pressure regulator. If that's the issue you'll regain pressure; (2) Mineral deposits/debris have clogged the pressure regulator inside the faucet apparatus, the pressure regulator has broken, or the pressure regulator is misaligned (for some reason) - most likely it's clogged/caked w/ mineral deposits. This pressure regulator (inside the faucet) can often be freed up with vigorous turning from open-to-close back & forth positions to nudge out remove stale mineral deposits to regain pressure i.e. a damn good cleaning. In some faucets there might also be a sediment cartridge (filter) which you can change. This depends on manufacturer & model (Moen, Delta, Pfister, etc.). The pressure regulator inside the faucet is open in the horizontal position closed vertical. Sometimes you can rotate open/close numerous times to unclog. I've found since you're in there R&R of a new faucet is best.
NOTE #2: (1) The above assumes you have no leaks you said you don't; (2) Not sure if you have a standalone shower or a tub + shower faucet (valve). Does the tub have pressure? Shower & tub would feed from same faucet so check if tub has low pressure if from same faucet.
NOTE: There are basically two pressure regulators: (1) One is contained inside the shower head itself - a common area where mineral deposits/debris blocks the pressure regulator. They're often plastic. Remove the shower head, then remove the pressure regulator. If that's the issue you'll regain pressure; (2) Mineral deposits/debris have clogged the pressure regulator inside the faucet apparatus, the pressure regulator has broken, or the pressure regulator is misaligned (for some reason) - most likely it's clogged/caked w/ mineral deposits. This pressure regulator (inside the faucet) can often be freed up with vigorous turning from open-to-close back & forth positions to nudge out remove stale mineral deposits to regain pressure i.e. a damn good cleaning. In some faucets there might also be a sediment cartridge (filter) which you can change. This depends on manufacturer & model (Moen, Delta, Pfister, etc.). The pressure regulator inside the faucet is open in the horizontal position closed vertical. Sometimes you can rotate open/close numerous times to unclog. I've found since you're in there R&R of a new faucet is best.
NOTE #2: (1) The above assumes you have no leaks you said you don't; (2) Not sure if you have a standalone shower or a tub + shower faucet (valve). Does the tub have pressure? Shower & tub would feed from same faucet so check if tub has low pressure if from same faucet.
Hi guys, hope everyone if having a great day!
Car is Home!
No issues on the ride home, the car drove great. 90% of the drive home was on major highways. Drove it about 65-mph most of way home, no unusual noises or vibrations. The only noticeable thing was the brakes were 200% better!
We stayed at the mechanics home quite awhile talking. He wanted to put my car up on the lift briefly and show me the extra work he did underneath. He also wanted to show us his 1972 4-4-2, W-30, 4-speed, convertible that he just finished this Spring. Aegean Aqua, with white stripes, white interior, and white top. As pretty an Oldsmobile as I've ever seen! It's 1 of only 33, W-30 4-speed convertibles built in '72. He just took Best in Class with it in the Performance Class at the Oldsmobile Nationals a couple of weeks ago. He also showed us his 1936 Oldsmobile 2-door Coupe Street Rod. It's purple with ghost flames, another really cool car. It was a nice visit. We even got invited to a party at his place on September 14th!
Well, all seems right with the world again, glad she's home and ready to roll again! 👍
Car is Home!
No issues on the ride home, the car drove great. 90% of the drive home was on major highways. Drove it about 65-mph most of way home, no unusual noises or vibrations. The only noticeable thing was the brakes were 200% better!
We stayed at the mechanics home quite awhile talking. He wanted to put my car up on the lift briefly and show me the extra work he did underneath. He also wanted to show us his 1972 4-4-2, W-30, 4-speed, convertible that he just finished this Spring. Aegean Aqua, with white stripes, white interior, and white top. As pretty an Oldsmobile as I've ever seen! It's 1 of only 33, W-30 4-speed convertibles built in '72. He just took Best in Class with it in the Performance Class at the Oldsmobile Nationals a couple of weeks ago. He also showed us his 1936 Oldsmobile 2-door Coupe Street Rod. It's purple with ghost flames, another really cool car. It was a nice visit. We even got invited to a party at his place on September 14th!
Well, all seems right with the world again, glad she's home and ready to roll again! 👍
Consider cutting the rear-end into x4 pieces & attaching some anchor chain to each piece. Make nice Christmas gifts for the boater friends on your gift list.
I shall have to take care of the next car at Chris's level.
Ya, I have the time and energy, and enjoy taking care of the cosmetic stuff and making it look pretty. I wish I had the mechanical knowledge that many of you do so I could do a better job taking care of that side of things. I'm very envious of many of you guy's mechanical knowledge. I'm learning slowly.
Last edited by Dream67Olds442; August 21st, 2024 at 05:09 PM.
Norm, factory stock under the hood. I will go with Pertronix sometime in the future. Chris, great turn around on the Olds, maybe that coil spring was your noise maker in the rear? I'd love to see that W30. Went to a car show at a local boat club. Met my buddy there with his 442. very good turn out. What's weird is all of the local cars that were there that I have never seen at a local show. Makes me think that they stick them in their garage, never to be driven. A friend of mine was there with his recent purchase, he had a '70 Lincoln MkIII, well he bought a beautiful black '56 Continental MkII. Damn fine looking car. Got my B.F.G. T/A's installed about 30 minutes before I went to the show.
Dan, yes it was a great turnaround, especially when he had to drive over 200-miles round-trip one day to pick-up the Rear End he salvaged the used axle from. As long as this guy has been working on cars, and he's 70, what he did for me he's probably done a hundred times and could do it blind folded. I will look to see if I can find his W-30 in Journey with Old's or in pics of Nationals that were posted on CO and I will post it/them.
Last edited by Dream67Olds442; August 21st, 2024 at 07:11 PM.
Honestly, I'm very amazed you found someone (you never met) with his level of knowledge in such a short very short period of time. I'm equally amazed how he took complete ownership of your situation, picked up your car, found a rear-end, drove to get the rear end, performed the R&R & had it road worthy serviceable for you in "record" breaking time. You are one extremely fortunate cookie!!
Honestly, I'm very amazed you found someone (you never met) with his level of knowledge in such a short very short period of time. I'm equally amazed how he took complete ownership of your situation, picked up your car, found a rear-end, drove to get the rear end, performed the R&R & had it road worthy serviceable for you in "record" breaking time. You are one extremely fortunate cookie!!
Me finding the guy who worked on my car was not happenstance by any means. I thought for sure that I had mentioned that Randi B. (Bardle), who did the work for me, is in the StL Archway Oldsmobile Club with me. Everyone I've ever heard talk about Randy working on their car, have nothing but respect and reverence for his knowledge and skill. In these parts, He da Man!
Good morning everyone.
Chris I'm glad you got your car back and you're happy with it. Maybe all he did was wash the windshield. When I was a kid and worked at the dealership, they told me to always wash the windshield on a car that just had work done on it. A car with a clean windshield runs better.
Dan one of my "bucket" cars is a Lincoln Mark II. They are big. There's a II in the museum I'm a member of that has a 426 hemi in it. Seems like an odd combination but it looks nice. It belonged Bill Harrah, the guy who owned the museum. When you have a lot of [someone else's] money you can do things like that.
Didn't knock 'em dead with overtime this morning but we didn't do too badly. No idea what's in store for today, but I know the lead won't be here so things will run better. Got some chores to do after work today, maybe I'll look at that shower head. If I can't find an easy fix then I'm taking my shower upstairs tomorrow.
Okay have a good day everyone.
Chris I'm glad you got your car back and you're happy with it. Maybe all he did was wash the windshield. When I was a kid and worked at the dealership, they told me to always wash the windshield on a car that just had work done on it. A car with a clean windshield runs better.
Dan one of my "bucket" cars is a Lincoln Mark II. They are big. There's a II in the museum I'm a member of that has a 426 hemi in it. Seems like an odd combination but it looks nice. It belonged Bill Harrah, the guy who owned the museum. When you have a lot of [someone else's] money you can do things like that.
Didn't knock 'em dead with overtime this morning but we didn't do too badly. No idea what's in store for today, but I know the lead won't be here so things will run better. Got some chores to do after work today, maybe I'll look at that shower head. If I can't find an easy fix then I'm taking my shower upstairs tomorrow.
Okay have a good day everyone.