1964-77 Olds parts for sale
#284
Hi, I am needing the lower chrome trim on the inside front door panels of a 67 cutlass s convertible in nice shape. Also need a passenger side interior panel above the armrest in any condition for the chrome and metal top piece. Please call 405-476-0380 or email Randy @ randy.unruh@sbcglobal.net Much appreciated!
#286
330 engine.
Hello Andre
I have some 330's that run, but would recommend rebuilding any of them before putting one in a car. I could put one on a pallet to ship, but don't know about shipping one overseas. If you want to research shipping methods I'd be open to discussing it with you. John
I have some 330's that run, but would recommend rebuilding any of them before putting one in a car. I could put one on a pallet to ship, but don't know about shipping one overseas. If you want to research shipping methods I'd be open to discussing it with you. John
#288
Parts Wanted
Sorry, I don't have an extra performer but I do have some core quadrajet carbs. If your looking for something to rebuild let me know and I'll see what I can dig up. John
#290
Door handle
Hello Projectheaven, yes I do have it but with the price of gas the trip to the post office and shipping would be more than I would ask for the handle. Is there anything else your looking for that could be combined in one package? John
#294
Hey 2blu442- I was curious to know if you would happen to have some fasteners I am in need of off that '67 convertible? I need the following:
1. hex head fasteners for top radiator cover
2. two of the convertible boot snap screws
3. the plastic loop/support and pin that holds the upper radiator hose
Let me know when you can if they are available and a price. I am in Lancaster, PA 17601
Thanks!
1. hex head fasteners for top radiator cover
2. two of the convertible boot snap screws
3. the plastic loop/support and pin that holds the upper radiator hose
Let me know when you can if they are available and a price. I am in Lancaster, PA 17601
Thanks!
#296
Olds Parts
Hello Gumby, I have a complete 1971 4 door with very little rust, I think the quarter panels are clean. What’s your location?
JS I should have the fasteners for the top plate and probably have may have the loop for the radiator hose.
Chazzer, sorry no three spoke wheels. Were you looking for a column shift or floor shift column?
John
JS I should have the fasteners for the top plate and probably have may have the loop for the radiator hose.
Chazzer, sorry no three spoke wheels. Were you looking for a column shift or floor shift column?
John
#298
1968 Steering Wheel
Hi Jim
Are you looking for a tilt/tele or a standard wheel? I don't have a 1968 Toro wheel but I may have one from a different year that would fit, just not look correct for the year. Let me know if you'd be interested in something like that. John
Are you looking for a tilt/tele or a standard wheel? I don't have a 1968 Toro wheel but I may have one from a different year that would fit, just not look correct for the year. Let me know if you'd be interested in something like that. John
#299
John, Yes I am looking for the tilit/tele wheel. I would prefer to find the 68 steering wheel. I think a 67 is very similiar looking but is not rim blow. I believe the steering wheels are the same for the Toro and full size cars.
#302
Parts
email sent MrSnowman74
JSGD if you'd send me your personal email through a PM I'll send you photos of the parts.
Chazzer, I don't have any of the full sized rim blow at this time.
Gumbyssfakee, I've taked photos of the 4 door car but need your personal email to send them to you. If your still interested please send it in a PM
John
JSGD if you'd send me your personal email through a PM I'll send you photos of the parts.
Chazzer, I don't have any of the full sized rim blow at this time.
Gumbyssfakee, I've taked photos of the 4 door car but need your personal email to send them to you. If your still interested please send it in a PM
John
#303
I need the drivers side mechanism that attaches to the inside door handle.I cant open my door because that piece broke on my 72 cutlass.Do you also have the left side piece that goes behind the Headlights? Not the headlight bezel but the piece that goes behind that?
#304
1972 parts
I know I have the inside door mechanism but am not sure I have the plastic piece behind the headlight bezel. The next few days at work will be hectic, but I'll try to get some photos later this week and show you what I have. John
#306
Would you happen to have any of the following:
1. a pair of serviceable dual exhaust manifolds for the 68-70 olds 98/88 455
engines ? if so how much
2. brackets and pulleys for the 68*70 olds 98/88 455 engine w/AC?
3 intake manifold for the 68-70 olds 98/88 455 engine?
Thanks
1. a pair of serviceable dual exhaust manifolds for the 68-70 olds 98/88 455
engines ? if so how much
2. brackets and pulleys for the 68*70 olds 98/88 455 engine w/AC?
3 intake manifold for the 68-70 olds 98/88 455 engine?
Thanks
#307
Olds 98 Parts
I have the AC brackets and intake, although I don't have the dual exhaust manifolds. I believe that was a W and an S, is that correct? Also where are you located? The intake weighs a ton and may be spendy to ship very far. The week at work is looking pretty crazy so it may be the weekend before I can send you photos to view. Would you send me your email address I can send photos to? I've got several complete 455's from 1968-72. John
#308
2blu442
My email is jerryandrandi@earthlink.net
Im located in NC and I agree with you on the intake weight and shipping cost. I may be interested in a few more things Oil filler tube, valve covers, fan and pulley set up for the 455 w/ac. look forward to hearing from you.
My email is jerryandrandi@earthlink.net
Im located in NC and I agree with you on the intake weight and shipping cost. I may be interested in a few more things Oil filler tube, valve covers, fan and pulley set up for the 455 w/ac. look forward to hearing from you.
#309
hey john not sure what you got left since this has been going on for a while, i was wondering if you might have a window motor for the tail gate of a 69 vista cruiser let me know thanks
#310
Horn guts for 64 F-85
Anyone have the horn guts (inside the steering column) for this vehicle? I am pretty sure the 64 and 65 are interchangeable--some of you who are more knowledgeable might know if more years are the same.
#311
Hello Dan
Yes, I should have a tailgate with a good motor. But if I remember right, it's the same motor that's used on the doors, just the regulators that are different.
Meat10, not sure if I have an extra column for parts. I'll look around and see what I have. John
Yes, I should have a tailgate with a good motor. But if I remember right, it's the same motor that's used on the doors, just the regulators that are different.
Meat10, not sure if I have an extra column for parts. I'll look around and see what I have. John
#317
Olds Parts
Emails sent to Wasted and Danlonchar
I should have a flexplate for $25 plus shipping, same price for a 1977 door window regulator. Send an email if you'd like to see photos of either.
John
I should have a flexplate for $25 plus shipping, same price for a 1977 door window regulator. Send an email if you'd like to see photos of either.
John
#319
Olds Parts
I have several sets of valve covers Toro68. Was there any specific vintage or style you were looking for? Send me your email address and I'll send you some photos. John
#320
Do you have a heat riser tube for a 455 on drivers side of block? zip 75228 Dallas, TX email: usmc2pvt@aol.com
Hi John, It is not an orginal air cleaner, I got it off another Cutlass 15 yrs ago. It has a four inch snorkle on driver side. Hoping to run a vent into it for cold air also.
Hi John, It is not an orginal air cleaner, I got it off another Cutlass 15 yrs ago. It has a four inch snorkle on driver side. Hoping to run a vent into it for cold air also.
Last edited by hamm36; December 30th, 2010 at 08:06 PM.