1964-77 Olds parts for sale
October 20th, 2009, 11:10 PM
#684
Registered User
Join Date: Jul 2007
Location: Tucson, AZ
Posts: 306
Thanks John, I knew I wanted to get this hood if I ever got a 70 Cutlass. I was going to go with a way that you described to do the OAI system but I talked myself to go more with the factory look. Plus I just seen that super cars unlimited has a "race" version of the OAI top for 200 and some change that Im probably going to get. I know it doesn't look %100 factory but for around $200 less I can live with out the flapper.
Also do you have a 70 4bbl intake and Qjet? Thanks in advance.
Also do you have a 70 4bbl intake and Qjet? Thanks in advance.
October 20th, 2009, 11:11 PM
#685
Registered User
Join Date: Jul 2007
Location: Tucson, AZ
Posts: 306
Thanks John, I knew I wanted to get this hood if I ever got a 70 Cutlass. I was going to go with a way that you described to do the OAI system but I talked myself to go more with the factory look. Plus I just seen that super cars unlimited has a "race" version of the OAI top for 200 and some change that Im probably going to get. I know it doesn't look %100 factory but for around $200 less I can live with out the flapper.
Also do you have a 70 4bbl intake and Qjet? Thanks in advance.
Also do you have a 70 4bbl intake and Qjet? Thanks in advance.
October 21st, 2009, 04:22 AM
#687
Registered User
Join Date: Jul 2009
Location: Spring, Texas
Posts: 66
Thanks. Sounds promising. The socket that holds the parking light bulb is also rusted out, so if you have a serviceable socket that goes with the parking light bucket, I could use that, too.
October 23rd, 2009, 06:02 AM
#689
Registered User
Join Date: Oct 2009
Location: Brookfield Connecticut
Posts: 4
Located in Medford Oregon, that's along Interstate 5 just above the Oregon/California border.
Rebuilder and runner engines:
330, 350, 403, 425, 455 price ranges from $100 up
Loose heads, #2,4,5,6,7,8 and C,E,G,Ga,J price ranges from $25-$100 each
Cranks, blocks, tin, etc.
TH350, TH400 and 2 speed trannies, $25 up
Rear ends, non-posi highway gears, $75 each
SSII 14X7 bolt on and snap center on rally wheels, $10-25 each
SSIII 15X7 snap on center rally wheels $25 each
Rolling Chassis 1964 2 door, 1965 4 door, 1968 2 & 4 door, 1971 2 & 4 door
Doors, Fenders, Deck Lids, Grills, interior parts
Prices are for pickup, to ship I may need to add a little to cover my time.
I also have parts and project cars
1964 F85 2 door
1965 Cutlass 4 door
1967 Buick Skylark
1967 Cutlass 2 door hardtop
1967 Cutlass Convertible
1968 Cutlass 4 door
1968 Delta 88
1968 Delta Custom
1971 Cutlass 4 door
1971 Cutlass Supreme
1971 Vista Cruiser
1972 Cutlass S
1974 Cutlass/442 clone
1975 Cutlass
1977 442
1977 Delta 88 Pace Car
I'm looking for the following items:
1964 Cutlass 2 door hardtop side glass
1965 442 Chrome around and between tail lights
M21 4 speed trannie
1964-5 A-body tilt floor shift column
Ram Air parts for 68-69 and 70-72
Always open to trades too. Its a great hobby, but I've collected more than I'm going to use and need to sell some stuff to purchase the parts for cars I want to rebuild. In addition I have a lead on 6 Toronados, three 1966, one 1967 and two late 1970's. Package deal none of the run, all but one is complete but have been sitting so long the tires are rotten. If your looking for a Toro project or parts contact me and I'll get back in touch if I'm able to purchase them. John
Rebuilder and runner engines:
330, 350, 403, 425, 455 price ranges from $100 up
Loose heads, #2,4,5,6,7,8 and C,E,G,Ga,J price ranges from $25-$100 each
Cranks, blocks, tin, etc.
TH350, TH400 and 2 speed trannies, $25 up
Rear ends, non-posi highway gears, $75 each
SSII 14X7 bolt on and snap center on rally wheels, $10-25 each
SSIII 15X7 snap on center rally wheels $25 each
Rolling Chassis 1964 2 door, 1965 4 door, 1968 2 & 4 door, 1971 2 & 4 door
Doors, Fenders, Deck Lids, Grills, interior parts
Prices are for pickup, to ship I may need to add a little to cover my time.
I also have parts and project cars
1964 F85 2 door
1965 Cutlass 4 door
1967 Buick Skylark
1967 Cutlass 2 door hardtop
1967 Cutlass Convertible
1968 Cutlass 4 door
1968 Delta 88
1968 Delta Custom
1971 Cutlass 4 door
1971 Cutlass Supreme
1971 Vista Cruiser
1972 Cutlass S
1974 Cutlass/442 clone
1975 Cutlass
1977 442
1977 Delta 88 Pace Car
I'm looking for the following items:
1964 Cutlass 2 door hardtop side glass
1965 442 Chrome around and between tail lights
M21 4 speed trannie
1964-5 A-body tilt floor shift column
Ram Air parts for 68-69 and 70-72
Always open to trades too. Its a great hobby, but I've collected more than I'm going to use and need to sell some stuff to purchase the parts for cars I want to rebuild. In addition I have a lead on 6 Toronados, three 1966, one 1967 and two late 1970's. Package deal none of the run, all but one is complete but have been sitting so long the tires are rotten. If your looking for a Toro project or parts contact me and I'll get back in touch if I'm able to purchase them. John
Geezer in CT
October 23rd, 2009, 06:26 AM
#690
Moderator
Thread Starter
Join Date: Sep 2006
Location: Medford, Oregon
Posts: 13,808
Hello Geezer
I know I have a power steering box from a 1965, and may have the power steering pump from a 330, but if they used different bracket on the 400 I don't have those. John
I know I have a power steering box from a 1965, and may have the power steering pump from a 330, but if they used different bracket on the 400 I don't have those. John
October 23rd, 2009, 05:22 PM
#693
Moderator
Thread Starter
Join Date: Sep 2006
Location: Medford, Oregon
Posts: 13,808
Geezer, PM sent
CHEPSKY@OPTONLINE.NET, I've got the wheels but shipping will probably double the price. Have you posted a parts wanted ad yet? I suspect you can find these wheels somewhere on the East Coast or at least mid-west. If you strike out let me know and I'll get a quote for you. John
CHEPSKY@OPTONLINE.NET, I've got the wheels but shipping will probably double the price. Have you posted a parts wanted ad yet? I suspect you can find these wheels somewhere on the East Coast or at least mid-west. If you strike out let me know and I'll get a quote for you. John
October 24th, 2009, 03:58 PM
#695
Moderator
Thread Starter
Join Date: Sep 2006
Location: Medford, Oregon
Posts: 13,808
Hi Jeremy, so far I'm striking out but I'll keep looking and let you know what I find. Is it different than the power steering one? I hadn't looked closely at the rag joints but thought they were the same for lots of years/models. Do you know which ones would interchange?
I'm taking photos of other parts request and will probably wait until after dark to post them. It's sunny and in the low 60's right now... days like these won't be common soon! John
I'm taking photos of other parts request and will probably wait until after dark to post them. It's sunny and in the low 60's right now... days like these won't be common soon! John
October 24th, 2009, 06:37 PM
#696
Seasoned beater pilot.
Join Date: Jan 2007
Location: Chicago
Posts: 5,468
I will take a pic of my old worn one, and count the splines. The power steering ones have a flat spot on one side and the manual steering ones are completely round with a different spline count.
October 29th, 2009, 03:33 PM
#697
Registered User
Join Date: Aug 2009
Posts: 48
Looking at the mirrors in your photos. Do you have a passenger side mirror for a 1964/1965 cutlass convertible. Also would like two mounting tabs also. What do you need for those items?
thanks
Denny
(How much for a couple of the mounting tabs?)
thanks
Denny
(How much for a couple of the mounting tabs?)
Last edited by 1964droptop; October 29th, 2009 at 07:39 PM. Reason: update
October 29th, 2009, 10:38 PM
#699
Seasoned beater pilot.
Join Date: Jan 2007
Location: Chicago
Posts: 5,468
I'm not sure if mine is stripped out, or if it's supposed to look like it does.
There doesn't seem to be much "meat" on there though. I'd like to be confident in the strength of my steering joints.... they might be important some day.
I got a hold of some 455 cranks locally on Wednesday. Thanks for the generous offer of shipping one out to me though.
I'm still looking for a driveshaft if you come across one, great. If not, no sweat. I'm going to try posting a wanted ad to see what's out there.
October 31st, 2009, 05:09 PM
#701
Registered Luser
Join Date: Aug 2006
Location: LI,NY
Posts: 3,783
Thanks again John!
John, got the rims today! Only pulled 1 out, but if they all look that good, I'm a happy man! Thanks again! By the way, if you find two more exactly like those, 15X7, I'll take those also.....let me know if they're hiding somewhere!
October 31st, 2009, 05:26 PM
#702
Moderator
Thread Starter
Join Date: Sep 2006
Location: Medford, Oregon
Posts: 13,808
Hi Erik
You should have gotten two packages, each package was two wheel boxes attached to each other one wheel each. So once both packages arrive you should have a full set of four. I shipped them at the same time so I hope you got or will get both packages close together. Keep me informed! John
You should have gotten two packages, each package was two wheel boxes attached to each other one wheel each. So once both packages arrive you should have a full set of four. I shipped them at the same time so I hope you got or will get both packages close together. Keep me informed! John
October 31st, 2009, 06:19 PM
#703
Registered Luser
Join Date: Aug 2006
Location: LI,NY
Posts: 3,783
Hi Erik
You should have gotten two packages, each package was two wheel boxes attached to each other one wheel each. So once both packages arrive you should have a full set of four. I shipped them at the same time so I hope you got or will get both packages close together. Keep me informed! John
You should have gotten two packages, each package was two wheel boxes attached to each other one wheel each. So once both packages arrive you should have a full set of four. I shipped them at the same time so I hope you got or will get both packages close together. Keep me informed! John
October 31st, 2009, 06:53 PM
#705
Registered Luser
Join Date: Aug 2006
Location: LI,NY
Posts: 3,783
November 1st, 2009, 05:01 AM
#709
Moderator
Thread Starter
Join Date: Sep 2006
Location: Medford, Oregon
Posts: 13,808
Erik, I'll try to snap some pictures that capture the damaged spot.
squirell, I may have an extra 1967 hood spear. I'll look and see.
Steve, I no longer have the Vista Cruiser. The rust around the top glass was much worse than I expected when I bought it. Eventually I dismantled the car, but still have many of the parts.
Craig, I'll keep you in mind as there are a lot of old cars still sitting in the weeds here. My greatest challange is my "day job" really eats into the time I can spend with the "hobby"
squirell, I may have an extra 1967 hood spear. I'll look and see.
Steve, I no longer have the Vista Cruiser. The rust around the top glass was much worse than I expected when I bought it. Eventually I dismantled the car, but still have many of the parts.
Craig, I'll keep you in mind as there are a lot of old cars still sitting in the weeds here. My greatest challange is my "day job" really eats into the time I can spend with the "hobby"
November 4th, 2009, 06:30 AM
#711
Moderator
Thread Starter
Join Date: Sep 2006
Location: Medford, Oregon
Posts: 13,808
Hi Denny
Sorry I hadn't got back to you yet on this. I need to make sure I have extra tabs first, I know I removed a couple mirrors to take pictures for someone wanting to know what they looked like. I don't want to split up the set of a tab and mirror. John
Sorry I hadn't got back to you yet on this. I need to make sure I have extra tabs first, I know I removed a couple mirrors to take pictures for someone wanting to know what they looked like. I don't want to split up the set of a tab and mirror. John
November 7th, 2009, 08:48 PM
#715
Moderator
Thread Starter
Join Date: Sep 2006
Location: Medford, Oregon
Posts: 13,808
Weasel, I'm glad you found what you needed. Sorry I didn't locate one for you, work's been hectic lately.
Erik, I took pictures of the bent wheel this afternoon. I posted several views on my photobucket site. When you have a minute check them out and let me know what you think.
http://s90.photobucket.com/albums/k257/2blu442/
Erik, I took pictures of the bent wheel this afternoon. I posted several views on my photobucket site. When you have a minute check them out and let me know what you think.
http://s90.photobucket.com/albums/k257/2blu442/
November 8th, 2009, 04:39 AM
#716
Registered User
Join Date: Nov 2009
Posts: 7
i need 2 wheels for '64 starfire??
Located in Medford Oregon, that's along Interstate 5 just above the Oregon/California border.
Rebuilder and runner engines:
330, 350, 403, 425, 455 price ranges from $100 up
Loose heads, #2,4,5,6,7,8 and C,E,G,Ga,J price ranges from $25-$100 each
Cranks, blocks, tin, etc.
TH350, TH400 and 2 speed trannies, $25 up
Rear ends, non-posi highway gears, $75 each
SSII 14X7 bolt on and snap center on rally wheels, $10-25 each
SSIII 15X7 snap on center rally wheels $25 each
Rolling Chassis 1964 2 door, 1965 4 door, 1968 2 & 4 door, 1971 2 & 4 door
Doors, Fenders, Deck Lids, Grills, interior parts
Prices are for pickup, to ship I may need to add a little to cover my time.
I also have parts and project cars
1964 F85 2 door
1965 Cutlass 4 door
1967 Buick Skylark
1967 Cutlass 2 door hardtop
1967 Cutlass Convertible
1968 Cutlass 4 door
1968 Delta 88
1968 Delta Custom
1971 Cutlass 4 door
1971 Cutlass Supreme
1971 Vista Cruiser
1972 Cutlass S
1974 Cutlass/442 clone
1975 Cutlass
1977 442
1977 Delta 88 Pace Car
I'm looking for the following items:
1964 Cutlass 2 door hardtop side glass
1965 442 Chrome around and between tail lights
M21 4 speed trannie
1964-5 A-body tilt floor shift column
Ram Air parts for 68-69 and 70-72
Always open to trades too. Its a great hobby, but I've collected more than I'm going to use and need to sell some stuff to purchase the parts for cars I want to rebuild. In addition I have a lead on 6 Toronados, three 1966, one 1967 and two late 1970's. Package deal none of the run, all but one is complete but have been sitting so long the tires are rotten. If your looking for a Toro project or parts contact me and I'll get back in touch if I'm able to purchase them. John
Rebuilder and runner engines:
330, 350, 403, 425, 455 price ranges from $100 up
Loose heads, #2,4,5,6,7,8 and C,E,G,Ga,J price ranges from $25-$100 each
Cranks, blocks, tin, etc.
TH350, TH400 and 2 speed trannies, $25 up
Rear ends, non-posi highway gears, $75 each
SSII 14X7 bolt on and snap center on rally wheels, $10-25 each
SSIII 15X7 snap on center rally wheels $25 each
Rolling Chassis 1964 2 door, 1965 4 door, 1968 2 & 4 door, 1971 2 & 4 door
Doors, Fenders, Deck Lids, Grills, interior parts
Prices are for pickup, to ship I may need to add a little to cover my time.
I also have parts and project cars
1964 F85 2 door
1965 Cutlass 4 door
1967 Buick Skylark
1967 Cutlass 2 door hardtop
1967 Cutlass Convertible
1968 Cutlass 4 door
1968 Delta 88
1968 Delta Custom
1971 Cutlass 4 door
1971 Cutlass Supreme
1971 Vista Cruiser
1972 Cutlass S
1974 Cutlass/442 clone
1975 Cutlass
1977 442
1977 Delta 88 Pace Car
I'm looking for the following items:
1964 Cutlass 2 door hardtop side glass
1965 442 Chrome around and between tail lights
M21 4 speed trannie
1964-5 A-body tilt floor shift column
Ram Air parts for 68-69 and 70-72
Always open to trades too. Its a great hobby, but I've collected more than I'm going to use and need to sell some stuff to purchase the parts for cars I want to rebuild. In addition I have a lead on 6 Toronados, three 1966, one 1967 and two late 1970's. Package deal none of the run, all but one is complete but have been sitting so long the tires are rotten. If your looking for a Toro project or parts contact me and I'll get back in touch if I'm able to purchase them. John
November 8th, 2009, 04:43 AM
#717
Registered User
Join Date: Nov 2009
Posts: 7
do you have 2 wheels for a '64 starfire? thanks, Mike
I just uploaded photos from several different kinds of wheels to my photobucket site. To check them out go to:
http://s90.photobucket.com/albums/k257/2blu442/
I don't have lots of center caps or trim rings, but can say for sure that the 5 bezels would be included with every wheel for the price I previously quoted. I don't have matching sets for most of them, so they would be different colors. I do have four of the bronze ones with round center caps, the rest may be one to three of the same color. I probably have three sets each of the 14X6 snap on and 14X7 bolt on, then two sets of the 15X7 snap on, 5 or 6 of the 1968 only 14X6 and I'm not sure how many of the 14X7 snap on. So check out the photos and let me know if you'd like to see more specific photos of anything. I can post them to the photobucket site or you can send me your email and I'll send them directly to you. I hope you guys have a Merry Christmas!
http://s90.photobucket.com/albums/k257/2blu442/
I don't have lots of center caps or trim rings, but can say for sure that the 5 bezels would be included with every wheel for the price I previously quoted. I don't have matching sets for most of them, so they would be different colors. I do have four of the bronze ones with round center caps, the rest may be one to three of the same color. I probably have three sets each of the 14X6 snap on and 14X7 bolt on, then two sets of the 15X7 snap on, 5 or 6 of the 1968 only 14X6 and I'm not sure how many of the 14X7 snap on. So check out the photos and let me know if you'd like to see more specific photos of anything. I can post them to the photobucket site or you can send me your email and I'll send them directly to you. I hope you guys have a Merry Christmas!
November 8th, 2009, 10:07 AM
#718
Moderator
Thread Starter
Join Date: Sep 2006
Location: Medford, Oregon
Posts: 13,808
Hello Mike
I have a lot of wheels that are the 5 bolts on a 4 3/4" pattern, and some wheels that are the 5 on 5" pattern. I don't know what the 1964 Starfire used, but doubt I have the factory original style. Do you have a photo of what your looking for? John
I have a lot of wheels that are the 5 bolts on a 4 3/4" pattern, and some wheels that are the 5 on 5" pattern. I don't know what the 1964 Starfire used, but doubt I have the factory original style. Do you have a photo of what your looking for? John
November 8th, 2009, 03:56 PM
#719
Registered User
Join Date: Oct 2008
Location: Ventura, CA
Posts: 251
John,
Would you have the center a/c duct (I think the manual calls it the manifold assembly) for 68 wth a/c? I need that and the one that goes to the center a/c outlet. See picture. I have all the other pieces, just need those two.
Thanks
Charlie
heaterduct.jpg
Would you have the center a/c duct (I think the manual calls it the manifold assembly) for 68 wth a/c? I need that and the one that goes to the center a/c outlet. See picture. I have all the other pieces, just need those two.
Thanks
Charlie
heaterduct.jpg
