2blu442

Hi Pete
I do have the parts, but think you can save money by purchasing a set already on the East Coast. I suspect Eightupman would have a set or know someone who does, he's in the Southeast. If he doesn't you could create a thread in the Parts Wanted section. I would suggest you try those ideas first and use me as a last resort. I have no problem pulling a set of heads for you, but shipping across country would likely add $50-100 to the price. John

pete1234

how much is a pair of heads without the shipping? I may be able to find someone who ships from the west coast, you can send a pm if you dont want the price public

toms1966rgtop

do you have a working fuel gauge for a 66 cutlass

peteo101

would anyone happen to have assorted parts for a 1970 toronado.. i am looking for a right front fender, rear quarter, taillights, steering wheel with horn in the rim of the wheel, or even the entire column if available.

2blu442

Sorry Tom, I don't have a working fuel gauge for the 1966. If you haven't posted a parts wanted ad on this site that might be worth a shot.

Pete, I have parts from a tilt tele column with a rim blow wheel that I suspect is either a 1969 or 1970, but I'm not sure. The steering wheel needs restored.

John

455 rkt

hi kevin, on the off chance U wouldnt have any idea where I may find a dash mounted rocker switch, I have two (roof and antenna) but the roof switch "cooked" on my 68 Delmont 88. I'm uncertain if there is any cross overs between models. Thanks for any help!
Giles

2blu442

Giles, PM sent

don_69sbo

Hi John,
Looking for a set of #5 heads for my '69 Cutlass. Any good cores available? If you have a set, what's the price for shipping to 61008?
Thanks, Don.

2blu442

Hi Don
Yes I have some. It may be the weekend before I can get to them but I'll get you a price quote with shipping costs. I also recommend having them hot tanked and magged before shipping so we both know there's no cracks. John

therobski

Is the 64 a post? May but the doors fixing what I have. Also I need the center chrome strip the goes all the way accross the hood and the left front fender chrome piece " hockey stick" that aligns to it. thanks.

2blu442

therobski, yes I have a set of door from a 1964 2 door post car and a set from a 1965 2 door post car. I believe they're in good shape. What's your location? John

Snowdog

Hey John,
Would you happen you have a " Radiator Schrowd"
that bolts to the center top for my '65 Cutlass with A/C ?
Metal Piece that would only stop A tie from getting sucked into
the fan, mine is missing.
Thanks, Kevin

2blu442

Hi Kevin
Not sure if I have an extra one, but I'll dig around. In 1965 the piece that bolted to the top of the radiator was kinda small. You'd still have to be real careful under the hood with a running motor

therobski

Dallas 75088. MY current doors are great except right along the bottom where the door skins meet the interior panel. So I need to weight the cost of RUST free doors VS the cost of buying replacements and shipping them.

therobski

Yes indeed 2BLU442 the little radiator support piece is small and can cause some problems-HURT-if not real carefull

2blu442

Kevin, I don't know if this would work for you. For some reason the previous owner cut it down even smaller than from the factory It will hold the radiator in place but doesn't do much to keep your tie out of the fan! If it would help you let me know your zip code and I'll get the shipping costs for you. This came off a stripped down F85 I bought that a previous owner used as a 1/4 mile car. I also have the dual quad setup for sale, but Joe P. mentioned in a previous thread that this model isn't the most efficient intake design. John

P1010269.jpg

P1010266.jpg

P1010001.jpg

P1010002.jpg

P1010003.jpg

P1010004.jpg

Snowdog

Thats the part but it is cut, keep an eye open for
me. Thanks John

stingger68

i am looking for a driver front fender for a 68 cutlass

2blu442

Hello stingger68
I'm not sure if I have an extra one or not but I'll take a look. There was a member in Utah I belive parting out a 1968 recently. Have you checked with him? Also, if you've not created a parts wanted ad yet that may be worthwhile. I suspect it would cost $75-100 to ship from Oregon to your part of the country. If you found someone in the Southeast with a decent fender that could save you on shipping. John

drec02

Would you happen to have a set of frame mounts for a 1972 Cutlass Supreme? If so could you give me a shipping quote?

2blu442

drec02, are these the metal pads that bolt to the crossmember and have the rubber motor mounts attached to them? Are you needing ones for a small block or big block? I would also need your zip code to give you a shipping quote. John

drec02

zip code 72342

2blu442

drec02, thank you for the zip code. Please provide more details on the parts you need.

I read through your other posts. It sounds like this is for a 350 motor. $15 to your door but it would be next weekend before I can dig them out. John

drec02

Thanks John I found a set that should be here tomorrow. Thanks for the assistance and if I or anybody(OLDS Powered) else I know happens to need anything we will be giving you a PM.

Limey

you selling the dual set up ?? if so PM me the price and ship quote to 61010 Byron,Illinois thru Fed Ex please

chris83

hey blue im in need of some doors in good condition for my 1974 442 and if possible the side window trim for the big triangle windows

STLCRZY

Hello,

do you have Turn signal switch & Wiper motor for my 65 442 and would you send to Germany?


regards
Denis

2blu442

Hi Chris83, sorry I don't have the parts you need.

Denis, I may have what you need but will have to look around some. I'm picturing the turn signal switch as being the piece inside the column that the blinker lever attaches to, is that correct? Have you met Ralph yet? He's a member of this board who also lives in Germany and has a 1965 442. John

STLCRZY

hello john
yes i´m in contact with Ralph and yes it´s the piece insite the column....but please forget the Turn signal switch before you invest to much time because maybe it´s better to buy this part new.....

sorry for my english

thanks
Denis

Phil Glass

Hi, looking for a 72 442 fan shroud, thanks Phil from Milwaukee

2blu442

Hello Denis, if you've not found a wiper motor yet I'll look to see what I have this weekend.

Phil, I think I've got an extra shroud but will have to check this weekend.

John

DAN76

hello, looking for a red 4bbl air cleaner for a 1965 high compression 425.
cheers, Dan

2blu442

Hello Dan
I don't hink I've got that one, but I'll look around to see.
John

DAN76

cheers :-)

65cutty

john, I need for a 1965 cutlass v8 a set of 29? or 308 ring and pinon gears that are hopefully good and my rear end is a stock 65 with a new set of 355 from richmond gears they dont have any 308's or less, changing the car over for road trips thanks for your time ...jim

2blu442

Hello Jim
I wish you were closer! I do have a 1965 F85 parts car with rear end code SC. My reference book shows that to be a 3.08 open rear end. If you were closer I'd offer it complete for $75, but I think shipping it to you would add several hundred dollars to the price. way too much for a non-posi. I could pull it apart and ship you the ring and pinion for the same price, to cover my time. But I don't have the skills to know if they good or bad... unless I see broken teeth.

If you wern't needing to stay original, I do have what I believe to be a 2.93 posi rear from a 1965 Buick GS. I've looked inside and don't see any damage or rust. It wouldn't be cheap to purchase and ship, but at least it would be a posi with highway gears that should bolt up. Although I don't know if the u-joint and driveline length would be different than the Olds. Maybe Jim or Brian could help with that information. If your getting up in price it may be more cost effective in the long run to purchase a rebuilt unit from one of them. I'm thinking they're both in the Mid-West although I don't remember exactly where they're at. Just some thoughts and ramblings.... Let me know if you want more details on anything. John

65cutty

john, I'd be interested in the 293, wish I knew more about this! was wanting to replace just the ring and pinon and keep my eaton posi which is pretty new or maybe someone could guide me though this, I cant see the car till this sat to ck about the sc dont know where to look. will be in touch soon, jim

65cutty

john I went to drive train and differentals and placed a question as what to do maybe someone there can guide me? heck I'd be willing to trade or sell my set up just to get better milage...jim

Arpster

I'm looking for the rear wheel well mouldings and the the drivers door moulding for my 1966 cutlass 442. I also need a coluum shifter lever and maybe some other items for my car. Do you have any of this or some leeds? I'm in Portland and would appreciate any help that you can offer. Thanks

2blu442

Arpster, I'll look around to see what I can find. I don't have a lot of 1966 specific parts. If you haven't placed a parts wanted on this site I'd encourage you to give that a try. John