LMHConcepts

I need the passenger door off a 1971 Supreme (2 Door Model), a drivers side fender, and a front windshield.

Email me at lee at LMHConcepts.com with the pricing, information, and pics.

2blu442

Hello LMHConcepts
I've got those items but shipping very far would be expensive. Please post your location. John

jimjr

John- Any luck with the kick-down switch? I responded to your PM, but I'm not sure I sent it correctly. I am interested in giving it a try here. Thanks! Jim

2blu442

Hello Jim
Work's been more hectic than normal, which has been pretty bad this summer! I'll try to get it shipped this weekend and send you a note when it's on it's way. John

DarrylJ

Hi John, did you happen to have a chance to look for those pull straps for my 71 Supreme? Thanks again!

FTW65W29

Thanks for looking. Keep me posted.

Snowdog

I could use a drivers side valve cover for a '65 330
with a hole for a PCV. Can you help me out?

2blu442

Jim, kickdown switch is on it's way.

Darryl, I pulled a set of sienna ones but discovered one of them is coming unglued. Check out the photos at the bottom and tell me what you think.

Snowdog, I've got a lot of valve covers, I'll dig around this weekend to see if I have one with the pvc hole that matches the 1965 with no hole.

Dan, I was looking at the seats today. If I were to strip the covers, padding, etc and ship only the springs and frames it would bring the shipping down quite a bit. Whats your thoughts?

Charlie, I'm working on your list.

FTW65W29 I'll try to get to the other parts car today.

wazoo, I haven't heard back from you. Will any of the parts I posted help you?



P1010473.jpg
P1010475.jpg
P1010476.jpg

64 Cutlass

"Dan, I was looking at the seats today. If I were to strip the covers, padding, etc and ship only the springs and frames it would bring the shipping down quite a bit. Whats your thoughts? "


John- That sound good to me, I'm going to completely rebuild it anyway! (New padding and ReCover Seats) We can ship it to my work if need be?-Thanks Dan

2blu442

Dan, yes a business address will also save $$. Please send me a PM with the shipping address and I'll try to get you a shipping quote tomorrow afternoon.
John

DarrylJ

They look like they will work, how much do you need for them?

2blu442

Darryl, if they will work for you how about $10 plus shipping? Please send me a Private Message with your address and I'll come up with shipping costs. John

wazoo

John

Sorry for the lapse. I found an umblemished radio so I'm set there. I still need the '75 left side dash piece if you can find it. If not, I take the '77 one you showed in pix. The difference is in the placement of the clock in those years. Let me know. I sure do appreciate it.

harleyrules

Looking for the alternator mounting brackets for a 64 Cutlass 330 mounting for passenger side of motor.

ctrain22

John,

Any word on my list??

Thanks

Charlie

2blu442

Wazoo, I'll keep looking for the correct 1975 piece.

harleyrules, I may have a late 1960's passengerside mount. I believe it would fit and function, but would not look like the one used in 1964. So let me know if your looking for one that looks correct for that year or just one that will work on the passengerside.

Charlie, the items I'm striking out on are the 1968 choke coil (one year only I believe) and the AC hoses. I believe I have everything else and will try to get some photos for you in the next couple evenings.

John

2blu442

Snowdog, I do have the valve cover you need. I'll try to get photos of it for you in the next couple evenings.

Dan, it may be the weekend before I can get the seats stripped down to the frames and boxed up to ship.

Darryl, I'll try to get the straps in a box the next couple nights after work.

Thanks for being patient with me guys... I enjoy my job but right now I'm getting a little too much of a good thing

harleyrules

John,
Can you post a picture of the one you are talking about? I found the top bracket need the bottom bracket now.
Thanks,
Rich

ctrain22

John,

Just let me know what you have and we'll go from there. Want to get htis motor in soon.

Thanks

Charlie

2blu442

Rich, I'll get a photo for you this weekend.

Charlie, I'll pull those items together on Saturday.

John

wazoo

John,

Do you have a photographic memory? You sure do sound like it. wazoo

2blu442

I am into photos, love that digital camera

German442

Hi!
Remember me? I'm the guy looking for the rear panel!

Ralph

2blu442

Sorry Ralph, I took these pictures a couple weeks ago but didn't get them posted. I think these are the body seams you are talking about, then a cut across the top just under the tail lights from side to side. Does this look correct to you? I'm thinking you don't need the portions where the frame mounts attach, or the section where the tail lights are. John

P1010512.jpg

P1010511-1.jpg

P1010510-1.jpg

P1010509-1.jpg

rumblewagen

Do you have a rust free lower windshield section for a 1972 Cutlass? Don't need alot of it maybe a 15" section right in the middle.

The damage
IMG_0295.jpg

The car.
smcutlass6.jpg

2blu442

Welcome to the site rumblewagen! I probably do, but since your spot is so small I've heard of people just taking a piece of sheetmetal off a door or hood, then bending it to the right shape and welding it on. John

P.S. 455, 6 speed, 3.73 posi, sounds like a fun car to drive!!!

rumblewagen

Yeah, the hand fabricated route has been considered, even though the rust area is small it has gone all three directions in the area where the firewall meets.


Lets just say it can be a hand full

2blu442

OK, rumblewagen I'll poke around this weekend and see what I have. John

smoke

do you have a trunk lid for 72 cutlass conv

2blu442

smoke, I have one that isn't rusty but the lock has been punched. I may have another one but I'll have to dig around and see. Also, if you didn't know the 4 door Cutlass from 1970-72 used the same deck or trunk lid.
John

marzgtp1

Please, don't forget about me John.

wj67442

i am checking to see if you have the trunk molding that says " OLDSMOBILE " and headlight bezels ( without notch ) for a 1967 442 Thanks !!!!

Wayne

Bobsw32

Jon


I am looking for the stud and washer and nut and bracket for the TCS switch off the intake manifold of a 1970 Cutlass .


I am also looking for the bolts off the front fender liner that have the big flat washers on them.... I could use six of them if you have them

scott_442

Hey John

I need a set of stock valve covers for a 72 455 and the heater hose bracket that attaches to the ac bracket. Can you help?

2blu442

PM's or email sent to:

BerBer
1964 Cutlass
Ctrain
69'442
Snowdog
Harlyrules
Smoke
Darrylj

I'm trying to send photos through an email or PM so that this thread isn't taking up too much space with photos

FWT65W29
Wazoo
rumblewagen
marzgtp1

I'll try to get photos for you guys soon

wj67442, sorry I don't have the items you need. I believe there are people on this site who do and suggest you look through the parts for sale in the last 12 months and/or post a parts wanted ad for them to reply to.

Bobsw32, I guess I'm confused, I thought the TCS valve was the tree with the multiple vacuum ports on it. Can you describe the item you need and where it's attached to the intake? I do have the fenderwell bolts.

scott_442, the stock valve covers would have been the notched ones. They're scarce and more spendy than others. Are those the covers your looking for? I should have the hose bracket but will have to look around.

John

ctrain22

John,

Got the PM and sent one back at ya.


Thanks

Charlie

scott_442

whatever you have that will fit...don't have to be notched. Where/why were they notched anyway?

2blu442

Scott, the valve covers had a sloped corner so that you can remove it without loosening the brake booster on the driver side, and to clear the AC condensor on the passengerside. So other covers will fit, but be a problem to remove. John

rumblewagen

Good Deal, if you need any info shoot me an E-mail. Damn phones attached at the hip, might as well put it to good use.

Allen

wj67442

John Thanks alot for the help and reply !!!!!!!!

Wayne