1964-77 Olds parts for sale
#442
john, would you have the bolts that hold down the rocker arm bridge for a olds 350? my email is jheim1@gmail.com thanks for looking ...jim, ps i need two.
#444
John,
Looking for a set of big block frame mounts for my 70 Cutlass. If you can help please PM or email me at sklbndt@***.net with total cost shipped to Virginia Beach, 23464.
Thanks, John
Looking for a set of big block frame mounts for my 70 Cutlass. If you can help please PM or email me at sklbndt@***.net with total cost shipped to Virginia Beach, 23464.
Thanks, John
#446
Hello John, sorry I don't have an extra set of the big block engine mount perches.
Brad, I have a set of trim on a 1974 Supreme that has the "V" shaped rear window, is that the same? Here's a photo of the rear of the car.
P1010810.jpg
Brad, I have a set of trim on a 1974 Supreme that has the "V" shaped rear window, is that the same? Here's a photo of the rear of the car.
P1010810.jpg
#447
TH 350 Tranny
I have a 1971 cutlass convertible(350)and just found it has a 1992 tranny, looking to put a 1971 back in it...do you have one? I dont know much about these cars so any advice appreciated...thanks
#448
Since you don't have the one with your vin number stamped on it I don't know how much difference in value you would get having one from 1971. I believe I do have one from 1971 and several others from this vintage, but shipping could become expensive. Please post your location and a thread in the parts wanted section, you should be able to find someone close to you with at least a good core transmission. I'm in Medford Oregon and if you are close enough I'll confirm what years I have. John
#451
#453
Mike, sorry I got busy and forgot to take the photos for you. I'll try again this weekend.
Wasted, yes I have some core carbs. Send me a pm to let me know what your looking for. John
Wasted, yes I have some core carbs. Send me a pm to let me know what your looking for. John
#456
It just so happens I have some of the items everyone is looking for.
69 Cutlass wheel trim / 69 350 High Compression with #5 heads.
I wasn't going to list anything untill I took inventory and cleaned everything up, but if anyone is interested I can take some picturers.
69 Cutlass wheel trim / 69 350 High Compression with #5 heads.
I wasn't going to list anything untill I took inventory and cleaned everything up, but if anyone is interested I can take some picturers.
#457
Chris, sorry I don't have the parts you need.
haack52, welcome to the site! If you haven't created a parts for sale thread please do so. It would help if you post the city/state your in. That will help folks consider shipping costs added to your asking prices. Also if you can post photos that is also good as it helps people evaluate the condition of the parts in the photos. John
haack52, welcome to the site! If you haven't created a parts for sale thread please do so. It would help if you post the city/state your in. That will help folks consider shipping costs added to your asking prices. Also if you can post photos that is also good as it helps people evaluate the condition of the parts in the photos. John
#458
Hi John,
I am after the brackets n pulleys for a 66 toro . Would have to have my bro pay for them and would have to get them shipped to his place in Orange County
If you have an upgraded starter motor and alternator , yes, I am also keen .
cheers buddy
mike
I am after the brackets n pulleys for a 66 toro . Would have to have my bro pay for them and would have to get them shipped to his place in Orange County
If you have an upgraded starter motor and alternator , yes, I am also keen .
cheers buddy
mike
#460
And like I said maybe an alternator , starter
When u get a chance , give me a indication of cost inc shipping to
CA 92867
cheers mike
hope you are warming as fast as it`s getting cold here
#461
OK, I'll see what I can dig up this weekend. Yes, the high temps predicted this weekend are mid-80's so that will be nice weather for working outside
I know I have one engine with the California emissions on it, that had different brackets on it. Would that work for you or do you want the brackets from a non-smog engine? John
I know I have one engine with the California emissions on it, that had different brackets on it. Would that work for you or do you want the brackets from a non-smog engine? John
#463
Hi Charlie
Yes I have 15X7 snap on center SSII wheels. I should also have some extra power boosters I can pull parts off of. The clevis your needing, is that the "U" shaped piece that threads onto the rod and has a pin/clip to attach it to the brake pedal? John
Yes I have 15X7 snap on center SSII wheels. I should also have some extra power boosters I can pull parts off of. The clevis your needing, is that the "U" shaped piece that threads onto the rod and has a pin/clip to attach it to the brake pedal? John
#464
OK, I'll see what I can dig up this weekend. Yes, the high temps predicted this weekend are mid-80's so that will be nice weather for working outside
I know I have one engine with the California emissions on it, that had different brackets on it. Would that work for you or do you want the brackets from a non-smog engine? John
I know I have one engine with the California emissions on it, that had different brackets on it. Would that work for you or do you want the brackets from a non-smog engine? John
Not really interested in emission stuff John . Need emissions to warm the earth . So, I am not in an urgent hurry .If nothing pops up when you have a quick search , I have time on my side (other than my age )
cheers
mike
#466
Hey gang, Can anybody help me find the bottom part of a console for my 72 cutlass? I live in Philadelphia and need it shipped. Thanks, Vinny freecell1968@aim.com
#468
Hey gang, Can anybody help me find the bottom part of a console for my 72 cutlass? I live in Philadelphia and need it shipped. Thanks, Vinny freecell1968@aim.com
#470
Hey John,
Do you have a back window for a 70 Cutlass S, 2dr post and trim? Rear quarters to if you hae'm. I'm also looking for a grille and headlight assembly to. I noticed the pic of the 71 cutlass wagon with the blue hood, is that for sale? I'm interested in that as well. I'll have a bigger list once i get the chance to look at my car closer. I do know I'll need interior as well. Thank, Bob RSM251@***.net
Do you have a back window for a 70 Cutlass S, 2dr post and trim? Rear quarters to if you hae'm. I'm also looking for a grille and headlight assembly to. I noticed the pic of the 71 cutlass wagon with the blue hood, is that for sale? I'm interested in that as well. I'll have a bigger list once i get the chance to look at my car closer. I do know I'll need interior as well. Thank, Bob RSM251@***.net
#471
Bob, I do have a back windshield but not a back side window for a post car. I do have some rear quarters on a parts car that are pretty clean, what's your location? Any chance your close enough to pick them up? I should have 1970 headlight buckets but I don't have any grills at this time. The wagon is a daydream for a W30 wagon clone, so the hood is not available. I've got lots of parts for the project, but several other projects in line before the wagon. Maybe when I retire I'll get to it
#473
I could ship a used rear windshield, but how much would it cost for you to purchase a new piece of glass? That might not be much more and having new clear glass with no flaws is nice!
The quarter panels would be the most difficult to ship. John
The quarter panels would be the most difficult to ship. John
#474
Vinny, email sent
Charles, attached are some photos but I've not had time to dig up the boxes for shipping costs. I also want to bolt each one to a car and spin it to see if it's straight. Do you need just the clevis from the brake booster? John
P1010275.jpg
P1010276-1.jpg
Charles, attached are some photos but I've not had time to dig up the boxes for shipping costs. I also want to bolt each one to a car and spin it to see if it's straight. Do you need just the clevis from the brake booster? John
P1010275.jpg
P1010276-1.jpg
#476
John,
As long as they are 15x7 so they work with the disc brake setup, I'll take them.
Pm me for payment details or email me at ctrain22@aol.com
As long as they are 15x7 so they work with the disc brake setup, I'll take them.
Pm me for payment details or email me at ctrain22@aol.com
#477
Mike,
I have several Toro starters from the 1960's so I'll hook one to a battery and make sure it spins. I have a box full of alternators, are you looking for specific numbers or just a core that would work on you car? The starter is heavy but will fit in a US Postal flat rate box. I think that's the best way to ship one of those. I've had three 1966 Toro parts cars, but it turns out two of them had the California emissions setups. I believe that gave them different brackets and am not sure about the pullys. They would bolt up fine I'm sure, but if you want to go original appearance that may not work. Let me know what you think.
Charles, Vinny emails sent.
John
I have several Toro starters from the 1960's so I'll hook one to a battery and make sure it spins. I have a box full of alternators, are you looking for specific numbers or just a core that would work on you car? The starter is heavy but will fit in a US Postal flat rate box. I think that's the best way to ship one of those. I've had three 1966 Toro parts cars, but it turns out two of them had the California emissions setups. I believe that gave them different brackets and am not sure about the pullys. They would bolt up fine I'm sure, but if you want to go original appearance that may not work. Let me know what you think.
Charles, Vinny emails sent.
John
#479
John
I'm looking a few things that will fit my 69 Cutlass S.
Do you have either:
1) The drivers side front fender top molding. (The long piece)
2) SSII/SSIII Bolt on center cap wheels.
Thanks.
Jon
I'm looking a few things that will fit my 69 Cutlass S.
Do you have either:
1) The drivers side front fender top molding. (The long piece)
2) SSII/SSIII Bolt on center cap wheels.
Thanks.
Jon
#480
Hi Jon
I don't have the trim but do have some 14X7 bolt on center wheels. What part of the country are you in? If your too far away from Southern Oregon you might post a parts wanted ad to see if you can save on shipping by buying them from the closest person. John
Charles, I shipped the 15X7 snap on center wheels today. You should have got a tracking number from FedEx emailed to you but if not let me know and I'll get it to you. John
I don't have the trim but do have some 14X7 bolt on center wheels. What part of the country are you in? If your too far away from Southern Oregon you might post a parts wanted ad to see if you can save on shipping by buying them from the closest person. John
Charles, I shipped the 15X7 snap on center wheels today. You should have got a tracking number from FedEx emailed to you but if not let me know and I'll get it to you. John