Hello Mike
Sorry, I don't have a list together, but do still have some 68 parts.
John

 

john, would you have the bolts that hold down the rocker arm bridge for a olds 350? my email is jheim1@gmail.com thanks for looking ...jim, ps i need two.

 

Yes I do, I'll send you an email.
John

 

John,
Looking for a set of big block frame mounts for my 70 Cutlass. If you can help please PM or email me at sklbndt@***.net with total cost shipped to Virginia Beach, 23464.

Thanks, John

 

John,

Do you have the chrome moulding that goes around the back window for my 75 Supreme?

 

Hello John, sorry I don't have an extra set of the big block engine mount perches.

Brad, I have a set of trim on a 1974 Supreme that has the "V" shaped rear window, is that the same? Here's a photo of the rear of the car.
P1010810.jpg

 

I have a 1971 cutlass convertible(350)and just found it has a 1992 tranny, looking to put a 1971 back in it...do you have one? I dont know much about these cars so any advice appreciated...thanks

 

Since you don't have the one with your vin number stamped on it I don't know how much difference in value you would get having one from 1971. I believe I do have one from 1971 and several others from this vintage, but shipping could become expensive. Please post your location and a thread in the parts wanted section, you should be able to find someone close to you with at least a good core transmission. I'm in Medford Oregon and if you are close enough I'll confirm what years I have. John

 

hey blue the 72 gold cutlass does it have any door panels if so how much an also the olds emblem across the bottom of the trunk i would call it a tape emblem being so long whats the price of these mike

 

Hello Mike
Send me your email address in a PM and I'll get some photos for you next weekend. John

 

mb197942@yahoo.com
thnx mike

 

Hey John by any chance do you have a Q-Jet?

 

Mike, sorry I got busy and forgot to take the photos for you. I'll try again this weekend.

Wasted, yes I have some core carbs. Send me a pm to let me know what your looking for. John

 

looking for the window trim for a 1974 cutlass 442 the tear drop or triangle windows in the back i have also heard of quater windows i can attach a pic so you know what windows thanks

 

how are the doors on the 1974 i need a set of good doors

 

It just so happens I have some of the items everyone is looking for.
69 Cutlass wheel trim / 69 350 High Compression with #5 heads.
I wasn't going to list anything untill I took inventory and cleaned everything up, but if anyone is interested I can take some picturers.

 

Chris, sorry I don't have the parts you need.

haack52, welcome to the site! If you haven't created a parts for sale thread please do so. It would help if you post the city/state your in. That will help folks consider shipping costs added to your asking prices. Also if you can post photos that is also good as it helps people evaluate the condition of the parts in the photos. John

 

Hi John,
I am after the brackets n pulleys for a 66 toro . Would have to have my bro pay for them and would have to get them shipped to his place in Orange County
If you have an upgraded starter motor and alternator , yes, I am also keen .

cheers buddy
mike

 

Mike
I probably have what you need. Which brackets are you looking for with the pullys? John

 

Yes, MAY have confused you here John. The alternator, power steering brackets , pulleys to suit the 66 toro .
And like I said maybe an alternator , starter
When u get a chance , give me a indication of cost inc shipping to
CA 92867
cheers mike
hope you are warming as fast as it`s getting cold here

 

OK, I'll see what I can dig up this weekend. Yes, the high temps predicted this weekend are mid-80's so that will be nice weather for working outside

I know I have one engine with the California emissions on it, that had different brackets on it. Would that work for you or do you want the brackets from a non-smog engine? John

 

John,

Do you still have any 15x7 wheels left? Also, I could use the clevis set up for the brake pedal to booster rod.

Thanks
Charlie

 

Hi Charlie
Yes I have 15X7 snap on center SSII wheels. I should also have some extra power boosters I can pull parts off of. The clevis your needing, is that the "U" shaped piece that threads onto the rod and has a pin/clip to attach it to the brake pedal? John

 

Hi John,
Not really interested in emission stuff John . Need emissions to warm the earth . So, I am not in an urgent hurry .If nothing pops up when you have a quick search , I have time on my side (other than my age )
cheers
mike

 

Hey John,
Yes, that's the part I need. Can you figure total cost for the wheels and brake parts, shipped to Ventura, CA 93003.

 

Hey gang, Can anybody help me find the bottom part of a console for my 72 cutlass? I live in Philadelphia and need it shipped. Thanks, Vinny freecell1968@aim.com

 

Hi Vinny
I may have a parts console, for your 1972 Cutlass? I'll dig around this weekend and send photos to your email address if I come up with anything. John

 

Hey gang, Can anybody help me find the bottom part of a console for my 72 cutlass? I live in Philadelphia and need it shipped. Thanks, Vinny freecell1968@aim.com

 

Thanks for looking out for a fellow olds guy.

 

Hey John,
Do you have a back window for a 70 Cutlass S, 2dr post and trim? Rear quarters to if you hae'm. I'm also looking for a grille and headlight assembly to. I noticed the pic of the 71 cutlass wagon with the blue hood, is that for sale? I'm interested in that as well. I'll have a bigger list once i get the chance to look at my car closer. I do know I'll need interior as well. Thank, Bob RSM251@***.net

 

Bob, I do have a back windshield but not a back side window for a post car. I do have some rear quarters on a parts car that are pretty clean, what's your location? Any chance your close enough to pick them up? I should have 1970 headlight buckets but I don't have any grills at this time. The wagon is a daydream for a W30 wagon clone, so the hood is not available. I've got lots of parts for the project, but several other projects in line before the wagon. Maybe when I retire I'll get to it

 

Deffinatley could use the back windshield, I live in omaha, NE. If you don't want to deal with shipping, its all good. I keep looking for it

 

I could ship a used rear windshield, but how much would it cost for you to purchase a new piece of glass? That might not be much more and having new clear glass with no flaws is nice!

The quarter panels would be the most difficult to ship. John

 

Vinny, email sent

Charles, attached are some photos but I've not had time to dig up the boxes for shipping costs. I also want to bolt each one to a car and spin it to see if it's straight. Do you need just the clevis from the brake booster? John

P1010275.jpg

P1010276-1.jpg

 

Charles,
The four wheels and the brake clevis would be $135.00 to your door.

Vinny, I'll reply to your email on the console bottom.

John

 

John,

As long as they are 15x7 so they work with the disc brake setup, I'll take them.

Pm me for payment details or email me at ctrain22@aol.com

 

Mike,
I have several Toro starters from the 1960's so I'll hook one to a battery and make sure it spins. I have a box full of alternators, are you looking for specific numbers or just a core that would work on you car? The starter is heavy but will fit in a US Postal flat rate box. I think that's the best way to ship one of those. I've had three 1966 Toro parts cars, but it turns out two of them had the California emissions setups. I believe that gave them different brackets and am not sure about the pullys. They would bolt up fine I'm sure, but if you want to go original appearance that may not work. Let me know what you think.

Charles, Vinny emails sent.
John

 

pm and email sent back at you. paypal sent. thanks

 

John

I'm looking a few things that will fit my 69 Cutlass S.
Do you have either:
1) The drivers side front fender top molding. (The long piece)
2) SSII/SSIII Bolt on center cap wheels.

Thanks.
Jon

 

Hi Jon
I don't have the trim but do have some 14X7 bolt on center wheels. What part of the country are you in? If your too far away from Southern Oregon you might post a parts wanted ad to see if you can save on shipping by buying them from the closest person. John

Charles, I shipped the 15X7 snap on center wheels today. You should have got a tracking number from FedEx emailed to you but if not let me know and I'll get it to you. John