1964-77 Olds parts for sale
Thread Starter
Moderator
Joined: Sep 2006
Posts: 14,262
From: Medford, Oregon
Parts
Wasted, it looks to me like the TH350 cable attaches to the gas pedal. Is this what you need?
P1010351.jpg
Charlie Brown, does this look like the yoke you need?
P1010262-1.jpg
P1010351.jpg
Charlie Brown, does this look like the yoke you need?
P1010262-1.jpg
Registered User
Joined: Apr 2008
Posts: 76
From: Lafayette NJ
Hi 2BLU,
I need the right side manifold off a F code 455. Casting on my cracked one is 417754 RH. Got anything in stock? John email is v1ohno@hotmail.com
I need the right side manifold off a F code 455. Casting on my cracked one is 417754 RH. Got anything in stock? John email is v1ohno@hotmail.com
Last edited by 68ragtop; Feb 16, 2009 at 05:36 AM.
Thread Starter
Moderator
Joined: Sep 2006
Posts: 14,262
From: Medford, Oregon
Manifold
68ragtop, the shipping will be $22.00, price $15.00. I'm sending photos to your email address, but if you want to try a parts wanted ad and see if you can get something closer to the East Coast that's fine with me. I believe this is a mid or late 70's manifold and I have several of them. I suspect others may have these laying around too. John
Seasoned beater pilot.
Joined: Jan 2007
Posts: 5,468
From: Chicago
60517 zip
Seasoned beater pilot.
Joined: Jan 2007
Posts: 5,468
From: Chicago
Hi 2BLU,
I need the right side manifold off a F code 455. Casting on my cracked one is 417754 RH. Got anything in stock? John email is v1ohno@hotmail.com
I need the right side manifold off a F code 455. Casting on my cracked one is 417754 RH. Got anything in stock? John email is v1ohno@hotmail.com
I don't think we have that manifold number in our WIKI yet.
Thread Starter
Moderator
Joined: Sep 2006
Posts: 14,262
From: Medford, Oregon
Manifold
Jeremy, I got one on a 1977 403 engine so I don't think it came on 68ragtop's 455. It has a #5 cast into it and the rear exhaust port dumps almost straight down, unlike the #4 manifold that was used on early 1970's small blocks.
P1010098.jpg
It's the one on the left, on the right is the #4.
P1010098.jpg
It's the one on the left, on the right is the #4.
Registered User
Joined: Jul 2007
Posts: 306
From: Tucson, AZ
Thread Starter
Moderator
Joined: Sep 2006
Posts: 14,262
From: Medford, Oregon
TH350 cable bracket
Wasted, is this for a 2 bbl carb? What year and engine is it for? I think I've seen a bracket that has both the throttle linkage and kickdown cable attached, could that be what your looking for? John
Seasoned beater pilot.
Joined: Jan 2007
Posts: 5,468
From: Chicago
John, the part WASTED is looking for is a metal bracket that bolts on the back 2 bolts of the carburetor on a 4bbl.
If it's a 2bbl, it bolts to the intake manifold.
It has 1 or 2 squares in it to hold the cables in place where they connect to the carburetor.
If it's a 2bbl, it bolts to the intake manifold.
It has 1 or 2 squares in it to hold the cables in place where they connect to the carburetor.
Registered User
Joined: Jul 2007
Posts: 306
From: Tucson, AZ
Thread Starter
Moderator
Joined: Sep 2006
Posts: 14,262
From: Medford, Oregon
1969 Passenger side mirror
Hello Rob
Sorry I don't. A bit of information I can share though, the 1969 and 1970 chrome non-remote mirrors look a lot alike but when you compare the bases where they mount to the door they're slightly different. So if you find one get some measurements to compare with your drivers side before buying it. Years ago I came up with a set from a 1970 and tried to put them on my 1969 that's when I discovered this. John
Sorry I don't. A bit of information I can share though, the 1969 and 1970 chrome non-remote mirrors look a lot alike but when you compare the bases where they mount to the door they're slightly different. So if you find one get some measurements to compare with your drivers side before buying it. Years ago I came up with a set from a 1970 and tried to put them on my 1969 that's when I discovered this. John
Registered User
Joined: Feb 2009
Posts: 157
From: Houston, Texas
Hello Rob
Sorry I don't. A bit of information I can share though, the 1969 and 1970 chrome non-remote mirrors look a lot alike but when you compare the bases where they mount to the door they're slightly different. So if you find one get some measurements to compare with your drivers side before buying it. Years ago I came up with a set from a 1970 and tried to put them on my 1969 that's when I discovered this. John
Sorry I don't. A bit of information I can share though, the 1969 and 1970 chrome non-remote mirrors look a lot alike but when you compare the bases where they mount to the door they're slightly different. So if you find one get some measurements to compare with your drivers side before buying it. Years ago I came up with a set from a 1970 and tried to put them on my 1969 that's when I discovered this. John
Rob
Thread Starter
Moderator
Joined: Sep 2006
Posts: 14,262
From: Medford, Oregon
1968-72 mirrors
Rob, I'm out in the garage this afternoon and just compared the 1968-69 and a 1970-72 chrome non-remote mirrors. The base near the stem is 1 1/8" wide on the 1968-69 and is 1 1/4" wide on the 1970-72. John
Thread Starter
Moderator
Joined: Sep 2006
Posts: 14,262
From: Medford, Oregon
1964 Shifter T handle
Sorry I don't. I have a couple shifters but they're both missing the T handle. If someone had the ability this would be a prime candidate to make reproductions of since most of them broke and were lost along the way! John
Registered User
Joined: Feb 2009
Posts: 5
Im in mississipi. I know that shipping the hood would be a fifty fifty chance of being damaged. The rear panels would be the interior panels with the arm rest. I bought my car and the only thing i have in the interioris the seats and the console shift. I can find the stuff to cover the panels but not the panels or the muffs themselves.
Thread Starter
Moderator
Joined: Sep 2006
Posts: 14,262
From: Medford, Oregon
Hello Alex
I was thinking the outside rear quarter panels is what you were needing. I'll have to look around to see if I have the interior parts. It may be next weekend before I can make the time for it though. You may want to post a parts wanted ad. I know there are several guys with this vintage of cars on this site. John
I was thinking the outside rear quarter panels is what you were needing. I'll have to look around to see if I have the interior parts. It may be next weekend before I can make the time for it though. You may want to post a parts wanted ad. I know there are several guys with this vintage of cars on this site. John
Registered User
Joined: Jan 2009
Posts: 9
From: Windsor,Ca.
hey john my name is johnny and i was curious to know if you had any of these parts,all are for a 72 cutlass s. :steering column,i wanted a hood like the one you have on the 70 wagon,front bumper,both grills pretty much all thats on the front alls i have is the fenders.if you can help that would be great, im located in northern california(95439)will body parts from another fit on a 72 cut.s. if so which ones?i also ordered a brand new carpet kit with the 8"inserts for the doors ,but was not the color wanted its brand new its supposed to be grey but to me seems to have a green tint to it,i want to sell also willing to trade.ill put pics up soon.let me know .thank you
Thread Starter
Moderator
Joined: Sep 2006
Posts: 14,262
From: Medford, Oregon
1972 Cutlass Supreme Parts
Good morning Jonny
I have a 1972 Cutlass S parts car with most of the parts you need, are you close enough to pick up the parts rather than ship? If your frame is bent I also have a good 1970 frame/rolling chassis. The nose from 1971 and 72 either the F85, Cutlass S, Cutlass Supreme, 442 and Cutlass Wagon & Vista Cruiser will all interchange. The grill panels look different but will fit. Any two door hardtop 1970-72 of the above cars will interchange the doors. The rear bumper is the same in 1971-72 with different tail light lenses, the 1970 will bolt up but the complete tail light configuration is different. The trunk lid, rear windshield and rear quarter panels from 1970-72 Cutlass Supreme are the same. That's a brief list of interchange on body parts. I'm always open to trades. Let me know what you'd like to see photos of. John
I have a 1972 Cutlass S parts car with most of the parts you need, are you close enough to pick up the parts rather than ship? If your frame is bent I also have a good 1970 frame/rolling chassis. The nose from 1971 and 72 either the F85, Cutlass S, Cutlass Supreme, 442 and Cutlass Wagon & Vista Cruiser will all interchange. The grill panels look different but will fit. Any two door hardtop 1970-72 of the above cars will interchange the doors. The rear bumper is the same in 1971-72 with different tail light lenses, the 1970 will bolt up but the complete tail light configuration is different. The trunk lid, rear windshield and rear quarter panels from 1970-72 Cutlass Supreme are the same. That's a brief list of interchange on body parts. I'm always open to trades. Let me know what you'd like to see photos of. John
Registered User
Joined: Jan 2009
Posts: 9
From: Windsor,Ca.
interested!
hey john ,im definetely interested ,and i might need the frame!ill check ,make a list and maybe we can check out those pics and figure out some prices.thank you for your time nd ill be talking with you shortly.johnny
Thread Starter
Moderator
Joined: Sep 2006
Posts: 14,262
From: Medford, Oregon
1970-72 parts
Hello mr-tom I probably have what you need but would like some more details on the parts. Is the tail light panel one of the colored lenses, if so which year and the upper or lower one if a 71-72? And is the body brace you need part of the frame or part of the sheetmetal where it attaches to the frame? If you could post photographs of this area it would help me see clearly the extent of what you need. John
Thread Starter
Moderator
Joined: Sep 2006
Posts: 14,262
From: Medford, Oregon
1964 Turn Signal
Tury801 the closest thing I would have would be a 1966 Toro non-tilt/tele column. I doubt they would be the same. Can you post a photo of it in the parts wanted section? That would help others check their stash of spare parts to see if they have it. John
Registered User
Joined: Jan 2009
Posts: 9
do you have any disc brake setups i have a 71 olds cutlass
Located in Medford Oregon, that's along Interstate 5 just above the Oregon/California border.
Rebuilder and runner engines:
330, 350, 403, 425, 455 price ranges from $100 up
Loose heads, #2,4,5,6,7,8 and C,E,G,Ga,J price ranges from $25-$100 each
Cranks, blocks, tin, etc.
TH350, TH400 and 2 speed trannies, $25 up
Rear ends, non-posi highway gears, $75 each
SSII 14X7 bolt on and snap center on rally wheels, $10-25 each
SSIII 15X7 snap on center rally wheels $25 each
Rolling Chassis 1964 2 door, 1965 4 door, 1968 2 & 4 door, 1971 2 & 4 door
Doors, Fenders, Deck Lids, Grills, interior parts
Prices are for pickup, to ship I may need to add a little to cover my time.
I also have parts and project cars
1964 F85 2 door
1965 Cutlass 4 door
1967 Buick Skylark
1967 Cutlass 2 door hardtop
1967 Cutlass Convertible
1968 Cutlass 4 door
1968 Delta 88
1968 Delta Custom
1971 Cutlass 4 door
1971 Cutlass Supreme
1971 Vista Cruiser
1972 Cutlass S
1974 Cutlass/442 clone
1975 Cutlass
1977 442
1977 Delta 88 Pace Car
I'm looking for the following items:
1964 Cutlass 2 door hardtop side glass
1965 442 Chrome around and between tail lights
M21 4 speed trannie
1964-5 A-body tilt floor shift column
Ram Air parts for 68-69 and 70-72
Always open to trades too. Its a great hobby, but I've collected more than I'm going to use and need to sell some stuff to purchase the parts for cars I want to rebuild. In addition I have a lead on 6 Toronados, three 1966, one 1967 and two late 1970's. Package deal none of the run, all but one is complete but have been sitting so long the tires are rotten. If your looking for a Toro project or parts contact me and I'll get back in touch if I'm able to purchase them. John
Rebuilder and runner engines:
330, 350, 403, 425, 455 price ranges from $100 up
Loose heads, #2,4,5,6,7,8 and C,E,G,Ga,J price ranges from $25-$100 each
Cranks, blocks, tin, etc.
TH350, TH400 and 2 speed trannies, $25 up
Rear ends, non-posi highway gears, $75 each
SSII 14X7 bolt on and snap center on rally wheels, $10-25 each
SSIII 15X7 snap on center rally wheels $25 each
Rolling Chassis 1964 2 door, 1965 4 door, 1968 2 & 4 door, 1971 2 & 4 door
Doors, Fenders, Deck Lids, Grills, interior parts
Prices are for pickup, to ship I may need to add a little to cover my time.
I also have parts and project cars
1964 F85 2 door
1965 Cutlass 4 door
1967 Buick Skylark
1967 Cutlass 2 door hardtop
1967 Cutlass Convertible
1968 Cutlass 4 door
1968 Delta 88
1968 Delta Custom
1971 Cutlass 4 door
1971 Cutlass Supreme
1971 Vista Cruiser
1972 Cutlass S
1974 Cutlass/442 clone
1975 Cutlass
1977 442
1977 Delta 88 Pace Car
I'm looking for the following items:
1964 Cutlass 2 door hardtop side glass
1965 442 Chrome around and between tail lights
M21 4 speed trannie
1964-5 A-body tilt floor shift column
Ram Air parts for 68-69 and 70-72
Always open to trades too. Its a great hobby, but I've collected more than I'm going to use and need to sell some stuff to purchase the parts for cars I want to rebuild. In addition I have a lead on 6 Toronados, three 1966, one 1967 and two late 1970's. Package deal none of the run, all but one is complete but have been sitting so long the tires are rotten. If your looking for a Toro project or parts contact me and I'll get back in touch if I'm able to purchase them. John
Thread Starter
Moderator
Joined: Sep 2006
Posts: 14,262
From: Medford, Oregon
Cardinals25, sorry I don't have a set available at this time. If you post a parts wanted ad please include your city/state, there may be someone close by with the parts you need. John
Thread Starter
Moderator
Joined: Sep 2006
Posts: 14,262
From: Medford, Oregon
Hello Wasted
I've got a plastic one that's in good shape. I'm not really sure when they went from metal to plastic. I also believe but am not positive that these covers will interchange from the TH350 to the TH400, visually the 2 speed looks like it may be the same too. The one I have in mind came off a 1971 455/TH400 setup. Price would be $12.50 plus shipping. PM me your email address & zip then I'll send you some photos and a shipping estimate if you'd like. John
I've got a plastic one that's in good shape. I'm not really sure when they went from metal to plastic. I also believe but am not positive that these covers will interchange from the TH350 to the TH400, visually the 2 speed looks like it may be the same too. The one I have in mind came off a 1971 455/TH400 setup. Price would be $12.50 plus shipping. PM me your email address & zip then I'll send you some photos and a shipping estimate if you'd like. John
Registered User
Joined: Dec 2007
Posts: 34
From: Spokane, Wa.
oldsparts
2blu i might have asked you in the past or on another forum but i dont remember, im looking for both front fenders for a 1975 cutlass supreme any chance you have those or can find some? im also looking for the right hood release cable if you happen to come across one.
Last edited by 75supreme; Mar 28, 2009 at 01:28 AM.
Thread Starter
Moderator
Joined: Sep 2006
Posts: 14,262
From: Medford, Oregon
1975 Cutlass Fenders
75supreme, yes I think I offered you a set of 1973 fenders and found they didn't have the sidemarker lights. I do have a 1974 Supreme that's complete but has been sitting for 15 years or more, it has nice front fenders. If you were close enough I'd sell you the whole car as it would make a decent project car or great parts car. I believe the 1974 are the same as 75, if so send me a pm or email with your email address and I'll send you photos. Someone tried to make a 442 clone out of this car, but they didn't know the Supreme was the wrong body style. So it has emblems on the fenders and the 442 hood. I don't know if he drilled holes for the emblems or broke off the studs and glued them on. John
