Hi John Would you have a radiator top plate for my 71 Supreme as I would like to change it to a 4 row radiator? I have a 350 with a/c but not sure on the Radiator. I think I need the bigger plate.
Thanks
Darryl J

 

Looking for frontt and rear bumpers for a 67 delta 88. You by chance have them?

 

Darryl, I think I do but will have to dig around this weekend. Please send me a message as a reminder if I don't get back to you by Sunday afternoon!

1967delta, I'm sorry but I don't have the bumpers you need.

John

 

Hello,
I need a use-able steering wheel for my 64 while my wheel is getting restored. Would you happen to have one?

 

64Todd, I probably have a badly cracked one! If your willing to use the old faux leather wrap to cover it until yours is done it might work. If your interested send me another message this weekend and I'll get some pictures for you. John

 

I'm looking for a steering wheel in good condition for a 1973 Regency 98 LS. Do you have one for sale, or maybe one comparable (72-74?) Thanks. Les

 

Les, I know I have a complete tilt column out of a 1973, I'll have to check and see the condition of the steering wheel. John

 

Thank you John. If you have one that'd be great. Please let me know if you find one. Les

 

john, do have a 65 cutlass dash bezel no speedo or switches even a bezel with butched radio will do?

 

Les, I'll try to get you photos this afternoon

Jim, PM sent.


John

 

Hi do you have a console top plate and console wire harness for 71 72 Cutlass ?

 

MJAKS462, I don't think I have the console parts you need, but I'll look around. John

 

DarylJ, sorry it took so long for me to get back to you. Here's a couple pictures of a 4 row top plate, 1969-72. I have several closeups on my photobucket site. It has surface rust, but I think a coat of primer would fill any pitting that may be there. For closeups go to: http://s90.photobucket.com/albums/k2...Cutlass%20442/

P1010085.jpg
P1010086.jpg

65cutty, PM sent with photos of a dash instrument panel.

Les, the 1973 Olds 98 steering wheel is badly cracked. The tilt column is good, but odds are the wheel you already have is better than this one.

 

I appreciate your checking on it for me John. Those steering wheels are hard to find in good shape. If you run across a two column wheel that might work, doesn't matter if it's a 73 (if it fits...I don't know much about that) but something comparable that goes on an Oldsmobile, please let me know. Car's at the paint shop now and I'm gonna replace the carpet. The steering wheel is just about all I need to complete my project. I'll post pics in the newbie forum when I can. Thanks again. Les

 

Sorry for duplicating a request if I do. I can't read 21 pages...lol

I need front and rear bumpers, rear bumper fillers (on the sides), core support, battery tray, and the front little lenses on the sides (amber) for a 76 cutlass supreme. Not sure what years fit, I'm sure you will know, haha. Thanks.


Almost forgot, I also need a drivers side mirror. If you have any sets that you don't want to part let me know, I wouldn't mind changing them for a cooler looking set if it comes down to it. Thanks.

 

Any chance you have a 67 cutlass Black steering wheel in decent shape?

Also Looking for a 65-67 4bbl air cleaner assembly, i think cutlass + full size is the same...

Thanks-
Ben

 

Hello,Do you have left front fender molding (long piece) for 64 cutlass? Interior door panel trim that divides vinyl and carpet? plastic molding clips for door and quarter molding? Power steering pump pully for 330 cutlass? Thanks Jon

 

Hello,

any chance of a good pair of 1968 headlight housings, 442 grill, and 350 exhaust manifolds? If so want would you want for each shipped to 22101.

Thanks

Adam

 

Les, the only thing I would have in good shape is from a 1974 Omega.

76Supreme350, I've got a set of bumpers from a 1977 442. I believe they'll fit OK but may have a slightly different appearance. I also have a partial set of bumper fillers, those should be the same.

Ben, I checked and don't have a good 1967 steering wheel.

Jon, I don't have the fender trim, but may have the interior parts. Is this a post or hardtop car? I may have the power steering pump pully too.

Adam, from your list the only thing I would have in good shape would be the manifolds. These are pretty common and you should be able to find some close by and save on shipping costs. If you haven't posted a parts wanted yet give that a try. If you still strike out on a set at a price you like let me know and I'll figure out a price with shipping.

John

 

Thanks John, I have a 64 cutlass convertible.Please let me know on the interior door panel trim and power steering pump pully.Any luck on door and Quarter molding clips? Thanks Jon westerling66@woh.rr.com

 

could i get a price for the bumpers shipped to 01960 (if you want to ship those). And how much for the fillers.

 

...for a 1971 Delta. Do you have one ? Thanks.

 

76Supreme350, I'll try to get you some pictures and approx shipping costs next weekend.

davesdelta, sorry I don't have the trim you need. You might send a message to kennybill on this site. He may have the part or be able to point you towards someone who does.

John

 

I'm looking for a front bumper for a 65 Olds Cutlass, would you have one?

 

ronknop, the only extra 1965 front bumper I have has rust showing through the chrome in the usual spots. I'm guessing you've already got one of those, but let me know if you'd like to see photos.

Also, you probably already know about the 1964-65 site. But just in case it's:

http://ultra-hi-comp.proboards.com/index.cgi?


John

 

do you have bumper fillers, (front) for a 65 cutlass?

 

jjcus, are you talking about the sheet metal fillers underneath the headlight assemblies? John

 

Do you have a driver side eye brow moulding from that 65 4 door?
No flaking, no tweaks, and no pitting.
Jim

 

A friend of mine needs the A/C control panel for his 65 442. Anyone point me in the right direction?

 

Not the metal fillers, the rubber inserts for the front bumper...

 

jjcus, you can get those through any of the parts houses, Fusick, etc.

 

Do you have a set of trunk torsion rods for a 67 Cutlass?

 

Whats up 2blu442 i took a look at the pics you posted on photo bucket i was wondering if you still had any olds 350's or even a 403 i dont!!! Want to drop a chevy in my cutlass im trying to keep it all olds.so if you have one cool i really like the olds 350 but if you dont have that the 403 would be fine.also i live in so.cali
i hope we can do bizness name your price.

 

Jim, last weekend I dug out three different pieces of 1965 eyebrow trim and they all had problems. Sorry, looks like I don't have a nice one at this time.

66 Olznut I don't have any 1965 AC parts, have you check the ultra high comp web site? I posted a link April 20th. That site is devoted specifically to the 1964-65 Cutlass/442. Someone there might be able to help.

jjcus, the rubber fillers I have are all hard and petrified. I think new repop would be your best bet.

Papa Bear, somewhere I have a set of those, but it's likely Razan can find his before I can find mine

ROCCETMAN, are you looking for a rebuilder? I've got one 403 but lots of 350's from 1968-72 plus 330's, 425's and 455's. Do you get up this way? Could you pick one up or would it have to be shipped? John

 

Not any more john im now a local commercial driver im still hoping we can do bissnezz.and yes ill need you to ship for me if its not a problem let me know

 

Oh yeah 2blu442 i need it rebuildable (68-72 olds 350)

 

@ Warhead: those eyebrows are available from Fusick or Year One.

Ralph

 

ROCCETMAN, I've got several 1968-70 350's but I would expect that shipping it to you may cost $250-300. Do you get discounts with your employer? I can take some photos next weekend if you'd like.

Ralph, thank you for posting about the eyebrows. Finding nice chrome for the 1965's seems hard to come by! John

 

whats up 2blu442 i wish i did get a discount my employer is cheap. but on a bizness note that would be cool if you could take a few pics of the motors also i wouldn't mind paying $200-$300 for a piece of rocket history(olds) plus what ever you may want for the motor just let me know thanks roccetman

 

No problem! Way I see it, we're all in this together, so why should we keep re-inventing the wheel?

Ralph