gjk1000
I sent an email to let you know I have a set of doors from a 1970 4 door hardtop, but I don't know for sure if they are the same or not. I suspect they are, but would like to have confirmation if anyone out there knows for sure. John

 

gjk1000, the message showing up in my inbox says you have a 1971 Cutlass Supreme, but your message here says it's a 4 door hardtop. I have a 1970 Cutlass Supreme 2 door as well as the 4 door hardtop. John

 

Do you you have a set of 67 Cutlas Bucket seats? If you do can you send me a pic? What is the price? e-mail me at GCUminup@aol.com

 

need left and right plastic housing for 72 cutlass442 407330-407331

 

GUS1130 email sent

nickthetrader I'll have to dig around and see what I have. I'm thinking your describing the plastic pieces that are around the headlights and have the aluminum trim piece that covers them. Let me know if your needing something else.

 

those are the ones

 

can you resend the email I didnt receive it

 

The buckets I have are very rough, and will need a lot of work. I would advise you monitor ebay and look for a better set. But, if you want these I would take $50 for the pair if you could pick them up. If I need to ship them I would want $125 to cover my time of packaging and shipping them. They are from a 1968, probably full sized car due to the trim on the seat back. The only difference between the 1967 and 1968 are that the 1967 had metal seat backs and bases, the 1968 used plastic.

These need rebult and the only thing I can say for sure you could use would be the seat frames and some small parts. You would need to replace the covers, foam, some or all the springs, seat rails, seat backs and bases, one is missing the seat back release plus the clips for the seat back to attach to it. I would be more inclined to use these as parts. I'll send the email with pictures again, if it doesn't reach you send an email to me at jmcneel@msn.com and I'll reply to that message. John

 

Hey John, Just perusing your postings and it seems you can get your hands on plenty of Olds parts. I have a 70 Cutlass S I'm about to start on and could use a driver's side grille. Am sure I'll be back here often for other parts as the project moves along.

 

Hello John
Not sure if I have a good grill panel right now, but I'll dig around. If you would send me an email I could reply to that with photos of what I come up with. John

 

i was wondering if you had the two front chrome pieces off of the front fender and also im looking for bucket seats for a 1965 Oldsmobile Cutlass F-85 Holiday Coupe.any ideas????

 

Oldsfreak69, I'll have to dig around and see what I come up with for 1965 parts. If I locate bucket seats they can be spendy to ship, what's your location? John

 

would you by chance have a compleat jack assy for 65 cutlass/>thank you for looking,,,,, jim

 

Hello Jim
Sorry, I can't help you with the 1965 jack.
John

 

how put together are the 455's you have and do you happen to have a cross member for a 86 442 th350 oh and an ac bracket for an 350

 

I have parts, cores for rebuilders, and complete runner 455's. I have AC brackets from 1960's and 70's engines, not sure if the 1986 is different or not. Sorry, I don't have the cross member you need. If your close enough your welcome to come by and check out the engines. If you want to see photos of anything send me your email address. John

 

can you help me out!
I have a 1964 super 88 and I am looking for the chrome piece that is between the back rear lights just below the trunk key lock.
It is the long chrome piece with the olds emblem in the middle. The 64 jetstar has the same piece
Hope you can help me or if you know of anyone that does....
Thanks Paul

 

can you help me out!
I have a 1964 super 88 and I am looking for the chrome piece that is between the back rear lights just below the trunk key lock.
It is the long chrome piece with the olds emblem in the middle. The 64 jetstar has the same piece
Hope you can help me or if you know of anyone that does....
Thanks Paul

 

Sorry Paul, I don't have any 1964 full sized car parts. If you haven't posted a parts wanted ad on this site yet I'd give that a try. Good Luck! John

 

Do you have Front disk spindle and brake set-up from a 1967-70 98 or 88?

 

I am looking for a driver side no post door for a 2 door 69 Cutlass with no/minimal rust and dents. Thanks for your help.

Darrell

 

69convertible, sorry I only have drum brakes from those years.

OLD SKL 69, sorry, I don't have any good 1969 hardtop doors either.

 

Hi,
I have a complete pair of taillights and the chrome piece that goes between them. Some pitting on the taillights, haven't cleaned up the rear chrome piece. Enclosing some pics of the taillights. I have a hardtop car (parts car) and a coupe (which I'm refurbing), just bought them and am still "inventorying" to see what I do need. I know I need passenger side headlight bezels, some side chrome pieces. Thanks.
Marc

 

Hi John I was wondering if you have a kickdown cable bracket??

 

Wasted, I'm not sure if I'm picturing the bracket you need. Can you give me more details? John

 

Hey John, do you have one of these fuel filler brackets 70-72 Cutlass? I have the bolts.
https://classicoldsmobile.com/forums...ple-these.html

 

Hamm36
I'll have to look. I've had lots of 70-72 cars but the one in the picture doesn't ring a bell. Where was this located, under the hood? John

Wait... fuel filter or fuel filler, like in gas tank inlet?

 

gas tank inlet: bolts to the body just above the inlet. All the cars I have looked at have the hole for mounting it. It is not for me it is for Rob and his mistress 72 convertible.

 

I think theres a bracket that holds the kickdown cable to the engine so the carb can pull the cable. I believe they came on mid 70s.

 

Hi, i need the both bumpers for my cutlass supreme 1967 in great conditions to rechrome or ready to go!!!!
it will be shipped to Miami.
thanks

Andre

 

to rechrome or ready!!!
it will be shipped to Miami.

thanks
Andre

 

Hamm, Wasted I hope to have some time to putter in the garage this weekend. I'll see what I can come up with.

Andre, I have an extra front bumper that would need re-chromed, not sure if I have the rear at this time. I'm a long ways from Florida, you might be able to save some on shipping if you can find them on the East Coast. If you want to send me a PM with your email address I can try to take some photos this weekend of what I have. John

 

Hello
I was just curious as to what you had in terms of 350's left, and what you'd be asking for. Thanks

-Ryan

 

Hello Ryan
I have still have several 350 engines. I have two 1968-69 with the #5 heads, two 1970 with #6 heads, if you pick it up in my driveway your choice for $250. I have a mid 1970's with #8 heads, mostly complete, free! Then I have loose blocks, heads, cranks if you don't need a complete engine with all the fasteners and brackets but want the parts to machine for a rebuild. I have a hoist if your close enough to pick it up I can load it in your truck/trailer. You had asked about 350's but other small blocks I have are one 403 and several 330's. The 403 is also free. John

 

John, I'm looking for a pair of #3 or 4's in nice shape for a friend . Hopefully runnable as is. He's a chevy guy and I convinced him to throw in an Olds 350 in place of his 'sploded 403 in his 77 T/A.
Soooo.... He went out and bought an 8 headed 76 motor.
I think he's going to be disappointed in it, so I want to bolt on some decent irons so he can't say "told ya so" those Olds motors are slow.
Let me know what you'd like for them including shipping and I'll pass the word along to him.
--Jeremy

 

Hey Jeremy, most I have need to be rebuilt. I need to check, but I think I still have a set of #3's that may be good. I got them several years ago from a guy who said they didn't rattle or smoke. Would you send me the zip code for shipping costs? John

 

Thanks for the info 2blu442, I'm mainly just keeping my eyes peeled, I've got a few more things I have to take care of before I can buy more toys, plus I just realized you are in Oregon, and I'm in connecticut, so that wouldn't be very easy either, but thanks, and If I do end up in need of a motor, I'll probly see what you have left for 350's or 403's

Thanks
-Ryan

 

Looking for black dash pad & Bezel for my 72 Cutlass Supreme. Must be nice. Let me know if you have.

Thanks,

Chuck

 

How bout a yoke for a long tail th400? Got one?

 

Hello Chuck, I have some dash pads but I don't think I have a good black one.

Charlie Brown, is it the yoke on the driveline that you need?

John