2blu442

Hello Den
Yes, I do still have SSII and SSIII wheels for sale. What part of the country are you in? John

Meat10

I am in need of a steering wheel for my 64 F85 Cutlass. It needs to match the silver blue metlic #2 paint scheme. Call me 850-867-0180. Thanks.

2blu442

Sorry, I don't have an extra wheel that's good.

Wasted

do you have the eyebrow trim for a 1964 f85, also the side emblems for the fenders??/

chip_gikey

I know the thread reads 64-77 but i was hoping and praying and crossing my fingers on an off chance that you may have some 63 dynamic 88 holiday parts in your, what seems to be, vast warehouse of oldsmobile parts . If im lucky enough that you do im looking for tail light lenses. If you happen to have some parts for the 63 but not tail light lenses ill happily take a list of things you have via pm. Once again being very optimistic and crossing my fingers. Parts for this car seem to be hard to find.

2blu442

Hello Wasted, sorry I don't have the eyebrows and the F85 emblems are spoken for if I can ever get them off the car!

Chip, sorry I don't have any 1963 parts, but I will keep my eyes open for them. What part of the country are you in? They don't salt the roads here and the wrecking yards are still getting a lot of 1950-70 cars in. Sadly, they're crushing them a mile a minute because scrap metal is so high. If you have time you might surf Craigslist or even post some parts wanted ads on it. If you found something local to my area I could check it out for you. John

Wasted

how much are you willing to sale them for when you get them off? Also do you have the driver side mirror, or the headlight bezels by any chance?

STR-8_CHARGIN

do you still have a 71 Cutlass available, if so does it have good Quarter Panels on it? if so how much would they set me back?

chip_gikey

Thanks blu. Im in south eastern ohio, so im quite a ways from you but i appreciate the offer and if i happen to run acrossed something close to you i may take you up on it. Nice to know us olds guys are willing to help each other out.

2blu442

Hello Wasted, I checked the headlight bezels and I don't have any good ones. I forgot to look for the mirror so I'll try to do that this weekend.

Hello Whitemike, yes I do have a 1972 Cutlass S and a 1970 Cutlass Supreme that I would consider cutting quarter panels from. What part of the country are you in? Let me know which model your looking for and I'll snap some photos. John

squeeze1971cutt

I hv a 71 cutt i nd grilles front bumper head lite bezels trn signals

2blu442

Hello Squeeze
I've got the bumper and turn signals for sure, probably the headlight bezels but I may not have good grills. Send me a pm with your address and I'll get back to you with a ballpark cost including shipping. John

Wasted

Well when you find out about the mirror let me know. oh yeah how much do you want for the f 85 emblems if you got them off yet? Thanks in advance.

rds989

Do you have any 15x7 SSIII rally wheels, for a 71 cutlass.
im just starting on to work on my mother's car and i'll need some other parts. Do you have a list?

Thanks

btw im in florida so i'll need shipping info also

allpro1975

WOW! It took me awhile to get through the thread but I made it.

I couldn't tell if you had gotten rid of the 77 442 or not. If you didn't, is it a total car purchase or will you part it out?

I need alot of parts but mainly the front end assembly and a good rear bumper.

70OLDS442

I AM LOOKING FOR A CRANK PULLEY, WATER PUMP PULLEY, ALTERNATER BRACKET FOR A 70 455 A/C CAR AND OIL FILL TUBE

jkt660

I could use a dual hump crossmember from a73-74 A body

dynamic88

2blu, you by chance dont have a transmission pan for a th400 do you? the bolt pattern on mine is warped from someone over tighten the bolts and now leaks. i have tried pounding them back down but it still leaks. if some how much? thanks chris

ro_p

I have a 72 Cutlass Supreme I'm trying to bring back and I need a front bumper, both left and right grilles and some body trim can you help?

2blu442

rds989, I have the 15X7 snap on but would want $25 each plus shipping. No center caps but they would have the bezels. There is a guy on this site that just offered a pair of 15X7's at $25 plus shipping for both, you might want to contact him first and he's in Wisconson, that would also save you money on shipping. His name is RPD1659 and his message was posted under the parts wanted as he was offering them to someone who hasn't replied to his message yet.

allpro1975, I still have the 1977 442 and would like to sell it complete. It's missing the engine and trannie, then the interior is two different colors but I believe it would be simple to revive it. Your welcome to provide me a list of what you need and make an offer on those items though and I'd consider it. I've got all the pieces I need but haven't had time to put it together yet.

70OLDS442, I have the parts you need. $30 plus shipping for the two pullys, Alternator brackets, oil fill tube. If you want to see photos PM me with your email address.

jkt660, If I were to part out the 1977 442 it has one that I believe will fit the 73-74 vintage. But I'm not an expert on this vintage, it would be good if you verified the 73-77 were all the same.

dynamic88, I've got several core TH400 trannies. $10 plus shipping. If you want to see photos send me your email address through a PM

ro_p, I believe I have a driver quality bumper and several pieces of body trim. No 1972 Supreme grills though. If you want to see pictures send me your email address through a PM and tell me which trim pieces you need.

John

Wasted

any word about the mirror or emblems for the 64 f85??

2blu442

Sorry, no luck on the mirror and the emblems are spoken for.

jkt660

I do beleave the crossmember will fit, let me know if you want to get rid of it and how much. Shippings going to Missouri 63026

jrblanke

Do you have any back up lenses for a 64 F85? I may have a few more requests after I pick up the car I just bought this up coming sunday.

mlancaster

I have 69 cutlass convertible, I need stone grille and grilles, what kind of emblems do you have? How about chrome trim?

gajs1410

John,

I am looking for the following for a '65 Cutlass:

Z bar set up, including mounts,

Dash for floor shift,

4-Speed shifter, linkage, and mount

Battery cable tube, (Manual trans)

Starter and brace,

Manual Transmission flywheel

Thanks, Steve

2blu442

jkt660, I haven't made a decision on the 1977 442 yet, but will let you know if the crossmember becomes available.

jrblanke, I need to check and be sure I have extras backup lenses before making a commitment. I've got a complete car that's rusty I plan to use as parts for a project car. I've been wanting to start this project since last year but haven't had time to yet. Your welcome to send me a list of items your looking for after you've gone over the car.

mlancaster, I don't have any perfect grills that are available but if you don't mind doing some work on them I believe I have both a set of Cutlass and 442 grills that have breaks in them. The 1970-72 has a piece called a stone shield that runs below the grills and in 71-72 also between them. I'm not sure which part your needing for your 1969, would you provide a little more information or a photograph? I may have some of the trim or emblems from a hardtop, but nothing convertible specific.

gajs1410, I have a 1964 and 65 4 speed project cars, but I don't have a lot of extra parts that are 4 speed specific. Are you looking for correct numbers on the shifter, starter and brace? Is the flywheel you need for a 64-67 engine or the 68-up bolt pattern? Is this a bench or bucket seat car?

J-(Chicago)

Flip a coin John, and if you ever end up angry at the decision, you can always spend the coin on a cup of coffee.
If I ever hit the lotto I'm coming by your place, and we're gonna fix em all.

2blu442

Yeah I know, I'm always more optimistic on what I can get done than reality will justify If I were just old enough to retire then I could play with cars full time! All the 1977 needs is an engine and trannie, which I have several of each, clean up the interior so it's all one color, I've got a black interior with swivel buckets and console, and it could be a daily driver. It would still need some minor rust repair and a paint job to be really nice. But I have several other project cars that are at the same stage. Just a few weeks of time, a little money and they could be decent drivers! Oh Well....

Meat10

I am in need of a steering wheel for my 64 F85 Cutlass. It needs to match the silver blue metlic #2 paint scheme.

Meat

2blu442

Sorry Meat, I don't have an extra wheel. John

Lazy

Would you have a 66 F-85 2-door bench seat frame assembly? I have one here with terminal cancer that is beyond repair. I would like to start with a really clean rust-free skeleton but can't seem to find one locally.

2blu442

Good morning Lazy
Now that's an interesting name! I've got a couple possibilities, is this for a 2 door car? Are you needing the complete frame or just the lower portion of the bench? Are you close enough to pick up or would it need shipped? I'm located on SW Oregon along Interstate 5, about 30 miles from the California border. John

Tomppa

Hello!

Do you have front fenders for Delmont 88 `68?
Or does any other olds model have same fenders that could fit..(?)

Thank you

Tomi Kallio

2oldsguy

I could use the two kick panels w/o A/C, with cables, seat belts and the plastic that goes around the vin number on the dash.

2blu442

Hi Tomi,
Sorry I don't have the fenders your looking for. You might contact kennybill on this site, he has lots of full sized cars and parts.

2oldsguy,
I don't think I have the kick panels but I may have the vin cover. You may have to paint it, but what color do you need? John

TheAcolyte

Do you have a rear passenger side quarter panel for a 2-door 1964 Jetstar 88 (cf. my website; it's the Holiday Coupe version)? It does not have to be rust free, but that would help. If so, how much to send to KCMO? Thanks!

garyboehm

Does anyone have an intake manifold #398662 for a 69 400 engine? I also need an oil pan, & distributor.

Thanks,

Gary

2blu442

Hi Gary
I may have the manifold although if your very far away shipping would be a killer. My reference book shows that same number used on both the 1968 and 1969 400's and 455's so you may want to post a parts wanted ad including those years and engine sizes. I've got oil pans and distributors, not sure if I have the correct numbered distributor for your application. If you want a price with shipping estimate pm me with your address. I'm located in Southern Oregon and even the size of the oil pan may run the shipping way up. If you post a parts wanted ad please include your city and state, there maybe someone close by with these parts. John

garyboehm

John,

We're at 75077 - Texas. You could be correct about shipping, but I have been looking for these parts for a year or so, and having no luck. So let's find out what it will cost - at least I'll know how much to ask the wife for!

Thanks,

Gary