1964-77 Olds parts for sale
#1281
#1283
jford721, I do have some parts from a 1973 Olds 98 and a 1971 Delta 88 engine compartment. I believe the compressor and brackets are the same as the A-body, the hoses are likely different. So purchasing a compressor with brackets close to your location would save you some coin on shipping costs.
daddio65, sorry I don't have the bumper your looking for. If you haven't made a parts wanted thread yet I'd encourage you to. Then every so often check the post and if you've not got replys post one yourself to bump it to the top.
oldspower619 I replied on your parts wanted thread.
For the other parts requests I'll be looking and taking pictures of whatever I come up with.
John
daddio65, sorry I don't have the bumper your looking for. If you haven't made a parts wanted thread yet I'd encourage you to. Then every so often check the post and if you've not got replys post one yourself to bump it to the top.
oldspower619 I replied on your parts wanted thread.
For the other parts requests I'll be looking and taking pictures of whatever I come up with.
John
#1284
batmobile67, I have both pullys. If your still looking for one send me a PM (private message) with your address and I'll get a price including a shipping cost for you. Also, these are both on pumps with brackets, so if you want the whole unit I can provide that or just the pully.
John
John
#1287
John That will workif the rear passenger door panel is blk. Would use until interior is ready to be reworked. What would the Price be in that condition , shipped to Ohio. My email is gfoust90@hotamil.com Thanks Gary
#1288
John That will workif the rear passenger door panel is blk. Would use until interior is ready to be reworked. What would the Price be in that condition , shipped to Ohio. My email is gfoust90@hotamil.com Thanks Gary
I'll have to dig around to see what I've got. There are some other guys here with spare parts so if you find one at a reasonable price from one of them go ahead and take it.
John
#1290
Have you got right left front fender chrome molding for 1964 Olds F85? If so please contact me, at blanchiegeorge@yahoo.com by email, or call me at 903-935-6770.
Thanks,
George
Thanks,
George
#1291
johnsw-31 I've got other dash pads and instrument panels. But the only black one with correct vents for the 1970 is damaged. You might try Eric (jensenracing77) or Scott (oldspackrat) as they've got a lot of parts.
George, I'll send you an email to make sure I'm thinking of the parts your looking for.
John
George, I'll send you an email to make sure I'm thinking of the parts your looking for.
John
#1293
#1295
John
#1296
I recently purchased a flywheel from 2blue, havent gone to get it yet, its sitting over at my dads place, Ill get it over thanksgiving, really good dude to do business with, he put up with my crap. haha!
#1298
Several years ago I had a couple of those cars, but don't think I saved the back windshield trim. I'd encourage you to create a parts wanted thread asking for this trim. If you have it but its damaged it might be worth while posting a picture so others can see what the pattern on the trim is. There are a lot of members on this site and hopefully someone will have access to these pieces.
John
#1299
george h 1949
Hey everyone I am still looking for chrome molding left and right sides from front to rear for my 1964 Olds F85 2 door. If anyone has any of the chrome I would appreciate your assistance.
#1301
Parts for 64 cutlass convert
Do you have any of the following:
Rear glass, filler piece that lies below the grill behind the front bumper, side panels for center console (red), chrome piece that lays on top of the center console, rear bumper. Let me know! Thanks!
Rear glass, filler piece that lies below the grill behind the front bumper, side panels for center console (red), chrome piece that lays on top of the center console, rear bumper. Let me know! Thanks!
#1302
Hi George and Ken
I've got some spare parts for the 1964 but will have to look to see if I have what you need. Threejdsolds (also named John) has some 1964 project and parts cars. You might contact him as well to see if he has the parts available.
pogo69, sorry I don't have the radio you need. There's two on ebay right now for $250-279 which seems a little high, but not too bad. I'd encourage you to create a parts wanted thread on this site to see if someone offers one for less.
John
I've got some spare parts for the 1964 but will have to look to see if I have what you need. Threejdsolds (also named John) has some 1964 project and parts cars. You might contact him as well to see if he has the parts available.
pogo69, sorry I don't have the radio you need. There's two on ebay right now for $250-279 which seems a little high, but not too bad. I'd encourage you to create a parts wanted thread on this site to see if someone offers one for less.
John
#1305
Skylines, I've got a couple motors for that vintage but am not sure if I can lay my hands on the regulators. Due to my lack or organization I didn't label the regulators over the years (I'll remember what car that came out of.....)
celodog, I may have a bumper but it would be a core that needs straightened and replated. What is the trim piece you need? I'm sure I don't have the fan shroud.
I'd encourage both you guys to create a parts wanted thread if you haven't already. Skylines, have you explored the 73-77olds.com site? Not nearly as active as this one but it does have people focused on your vintage of car.
celodog, I may have a bumper but it would be a core that needs straightened and replated. What is the trim piece you need? I'm sure I don't have the fan shroud.
I'd encourage both you guys to create a parts wanted thread if you haven't already. Skylines, have you explored the 73-77olds.com site? Not nearly as active as this one but it does have people focused on your vintage of car.
#1306
this little elbow trim piece is what i need.. the driver side one is on there, but not the passenger side.
trimpart_zpsaf7cba15.jpg
trimpart_zpsaf7cba15.jpg
#1307
#1310
Skylines, I've got a couple motors for that vintage but am not sure if I can lay my hands on the regulators. Due to my lack or organization I didn't label the regulators over the years (I'll remember what car that came out of.....)
I'd encourage both you guys to create a parts wanted thread if you haven't already. Skylines, have you explored the 73-77olds.com site? Not nearly as active as this one but it does have people focused on your vintage of car.
I'd encourage both you guys to create a parts wanted thread if you haven't already. Skylines, have you explored the 73-77olds.com site? Not nearly as active as this one but it does have people focused on your vintage of car.
#1311
Parts!
I keep getting a msg from you and I haven't asked about parts for a long time. I no longer have my 65 442 not for at lease 6 months now and I did post on this thread that very thing ( that my car was sold ) so please no more e-mails, thanks...
#1312
Nobody is emailing you. The forum is automatically sending you an email every time there is an additional post because your settings are that like that by default. You need to go into User CP and adjust your preferences. Look for the type of notification you should receive to subscribed threads, or cleared out your subscribed threads all together. You can PM me if you need any specific help, or one of the mods can help you I'm sure.
#1313
John
#1315
#1316
#1317
Still looking for a Rocker metal trim for the passenger side 1964 Oldsmobile Cutlass convertible . Goes from the front tire under the passenger door to another smaller piece near the rear tire. Thanks
Denny G
MPLS MN
Denny G
MPLS MN
#1319
celodog, here's a couple pictures of the clip. If you still need this send me a PM Next time I'll have to remember to wash my hands before taking pictures!
P1061109_zps61616f09.jpg
P1061110_zpsdcfa544d.jpg
Denny, check with threejdsolds, I think he's got the rocker panel trim.
starfire, I may. Do you know if the 68-69 are different from the 70-72? I'll look this weekend to see what I can find.
John
P1061109_zps61616f09.jpg
P1061110_zpsdcfa544d.jpg
Denny, check with threejdsolds, I think he's got the rocker panel trim.
starfire, I may. Do you know if the 68-69 are different from the 70-72? I'll look this weekend to see what I can find.
John