1964-77 Olds parts for sale
July 6th, 2012, 09:26 PM
#1247
Registered User
Join Date: Sep 2009
Posts: 72
July 6th, 2012, 09:52 PM
#1248
Registered User
Join Date: Nov 2007
Location: Houston Tx
Posts: 96
were you able to locate any console lids?
I also need a Timing Chain Cover Plate for a 350 and the bolts to put it back on if you have them as well. Somehow my mechanic seemed to misplace them ;-(
And if possible do you have a Cutlass Supreme that had a Vinyl Top on it? if so I need the lower trim pieces off of it
I also need a Timing Chain Cover Plate for a 350 and the bolts to put it back on if you have them as well. Somehow my mechanic seemed to misplace them ;-(
And if possible do you have a Cutlass Supreme that had a Vinyl Top on it? if so I need the lower trim pieces off of it
July 6th, 2012, 10:07 PM
#1249
Registered User
Join Date: Sep 2009
Posts: 72
console
were you able to locate any console lids?
I also need a Timing Chain Cover Plate for a 350 and the bolts to put it back on if you have them as well. Somehow my mechanic seemed to misplace them ;-(
And if possible do you have a Cutlass Supreme that had a Vinyl Top on it? if so I need the lower trim pieces off of it
I also need a Timing Chain Cover Plate for a 350 and the bolts to put it back on if you have them as well. Somehow my mechanic seemed to misplace them ;-(
And if possible do you have a Cutlass Supreme that had a Vinyl Top on it? if so I need the lower trim pieces off of it
July 15th, 2012, 09:53 PM
#1255
Moderator
Thread Starter
Join Date: Sep 2006
Location: Medford, Oregon
Posts: 13,808
dwiener, were you able to get bumpers from jjcus?
STR-8_CHARGIN, I have some of the parts you need but right now work is very busy. Have you created a parts wanted thread yet? The vinyl top trim is hard to come by. But the rest of the items are fairly common and I suspect several members here would have them.
jadams, sorry I'm looking for those items myself
The rocker trim on my car looks like someone poured acid on parts of them.
tcarrol, I'm sure I've got one in a coffee can as I've parted out 3 or 4 1968's over the years. But due to my work schedule I'll not have time to look for a while. f-85 was parting out a 1968 Cutlass not long ago, have you checked with him yet?
starfire, if you've not created a parts wanted thread yet you might give that a try. I've only seen a few red interiors, what do you think about dying a different color to red?
John
STR-8_CHARGIN, I have some of the parts you need but right now work is very busy. Have you created a parts wanted thread yet? The vinyl top trim is hard to come by. But the rest of the items are fairly common and I suspect several members here would have them.
jadams, sorry I'm looking for those items myself
The rocker trim on my car looks like someone poured acid on parts of them. tcarrol, I'm sure I've got one in a coffee can as I've parted out 3 or 4 1968's over the years. But due to my work schedule I'll not have time to look for a while. f-85 was parting out a 1968 Cutlass not long ago, have you checked with him yet?
starfire, if you've not created a parts wanted thread yet you might give that a try. I've only seen a few red interiors, what do you think about dying a different color to red?
John
July 15th, 2012, 09:55 PM
#1256
Moderator
Thread Starter
Join Date: Sep 2006
Location: Medford, Oregon
Posts: 13,808
July 16th, 2012, 01:16 AM
#1258
Registered User
Join Date: Apr 2012
Location: Close to Dresden in Saxony, Germany
Posts: 29
Hi John, I am looking for a clock/watch for a 1966 dynamic88 conv. for the dash (instrument right hand side). Any chance you have one? Not sure if anyone from other year could fit too. P.S. shipping to europe?
July 17th, 2012, 09:17 AM
#1260
Registered User
Join Date: Jul 2012
Location: Virginia Beach
Posts: 8
71 bench seat
Hi John--tru-blue suggested I try you--guy put an Olds 88 bench (he thinks) in my newly bought 71 Cutlass S and it just doesn't fit right--too high, too close to dash. Would like a Cutlass bench, black, with armrest, but any A-body bench will do.
Dan
Dan
July 24th, 2012, 10:34 PM
#1262
Moderator
Thread Starter
Join Date: Sep 2006
Location: Medford, Oregon
Posts: 13,808
Hey guys,
Sorry but my work hit one of those busy periods where I'm working long days and through the weekends. I'm hoping it slows down soon and when it does I'll get in touch to see if you've found the items you were looking for yet.
John
Sorry but my work hit one of those busy periods where I'm working long days and through the weekends. I'm hoping it slows down soon and when it does I'll get in touch to see if you've found the items you were looking for yet.
John
September 13th, 2012, 04:00 PM
#1264
Registered User
Join Date: Aug 2012
Posts: 9
I apologize if I have already contacted you, but I need the crank and water pump pulleys for 1967 442 with air ( three grooves.) JB 389645 and JH 391114
New to this forum and don't know what I'm doing.
Thanks,
Lasetert@bellsouth.net
New to this forum and don't know what I'm doing.
Thanks,
Lasetert@bellsouth.net
September 15th, 2012, 07:57 PM
#1266
Moderator
Thread Starter
Join Date: Sep 2006
Location: Medford, Oregon
Posts: 13,808
September 16th, 2012, 10:05 AM
#1268
Registered User
Join Date: Feb 2012
Location: Escondido California
Posts: 272
little bits
John,
I could use the little chrome bolt and plastic washer that goes on the leading edge of the door jamb for the ventilator window.. Also a set of washer squirter nozzles and my '66 442 thanks you as do I.
Thanks,
Nufo (Fred)
I could use the little chrome bolt and plastic washer that goes on the leading edge of the door jamb for the ventilator window.. Also a set of washer squirter nozzles and my '66 442 thanks you as do I.
Thanks,
Nufo (Fred)
September 21st, 2012, 07:09 PM
#1271
Moderator
Thread Starter
Join Date: Sep 2006
Location: Medford, Oregon
Posts: 13,808
Hi Guys
Sorry, I've not had time to look for parts in the last couple weeks.
Ely442, I don't have the pieces your looking for.
Nufo, are you still needing these pieces?
Sammy, sorry no extra boxed control arms/sway bar. You might try the repop inserts to box the arms you have now.
CP888, I'm pretty sure I don't have any decent grill panels but will look this weekend.
John
Sorry, I've not had time to look for parts in the last couple weeks.
Ely442, I don't have the pieces your looking for.
Nufo, are you still needing these pieces?
Sammy, sorry no extra boxed control arms/sway bar. You might try the repop inserts to box the arms you have now.
CP888, I'm pretty sure I don't have any decent grill panels but will look this weekend.
John
October 31st, 2012, 12:31 PM
#1273
Registered User
Join Date: Oct 2012
Posts: 8
power steering pulley
Noticed in an older post that you said you had a bunch of pulleys in a box, and figured it was worth a shot. I'm interested in a power steering pump pulley...part # stamped on front, either 384678 JM (preferred original for my 330) or 391061 JP will work. Do you have any pulleys with these numbers? If so and still available, what's your price? Please let me know either way...I'd really appreciate it.
October 31st, 2012, 07:33 PM
#1276
Moderator
Thread Starter
Join Date: Sep 2006
Location: Medford, Oregon
Posts: 13,808
Batmobile, I've got some early power steering pumps but it will likely be the weekend before I can check their numbers.
johnsw-31, yes I have some dashboards but again, it would be the weekend before I can look. Are you looking for a specific color?
easytobedead, I should have both but will have to dig around to be sure. Shipping will add to the costs. Would you send me your zip code for a shipping estimate?
johnsw-31, yes I have some dashboards but again, it would be the weekend before I can look. Are you looking for a specific color?
easytobedead, I should have both but will have to dig around to be sure. Shipping will add to the costs. Would you send me your zip code for a shipping estimate?
