Package tray corner trim
August 14th, 2018, 08:04 PM
#3
Registered User
Join Date: May 2008
Location: Austin, Texas
Posts: 3,134
Here's what the correct package tray corners will look like (see pic).
Not for sale at this time....check with Scott (Oldspackrat)....watch for severely "dried out" ones and warped pieces (from serious sun/heat exposure combined with an overtightened mounting screw).
Not for sale at this time....check with Scott (Oldspackrat)....watch for severely "dried out" ones and warped pieces (from serious sun/heat exposure combined with an overtightened mounting screw).
Last edited by 70Post; August 14th, 2018 at 08:07 PM.
August 15th, 2018, 07:21 AM
#5
Registered User
Thread Starter
Join Date: Oct 2015
Location: Prescott Wash.
Posts: 548
"I'm sure I have an extra one or two in my Supreme parts stash. If you're interested, I'll take a look.
Terry"
Yes please see if you have both. You can contact me via email ajfink57@msn.com
Terry"
Yes please see if you have both. You can contact me via email ajfink57@msn.com
August 15th, 2018, 04:31 PM
#6
Just an Olds Guy
Join Date: Jul 2008
Location: Edmonton, AB. And "I am Can 'eh' jun - eh"
Posts: 24,525
August 15th, 2018, 07:41 PM
#7
Registered User
Join Date: May 2008
Location: Austin, Texas
Posts: 3,134
Alan - I've pulled a couple dozen sets of these from all kinds of GM 69-72 Abodies (mainly Cutlass S bodies and Skylarks) and have never seen them in metal. You sure about that?? They have a metal "insert" around the screw hole but again, I've never seen any with a metal "body".
I did attempt to make a pair from metal one time for a car but stopped the "project" as it was a real PITA.
I did attempt to make a pair from metal one time for a car but stopped the "project" as it was a real PITA.
August 16th, 2018, 07:25 AM
#8
Registered User
Join Date: Aug 2013
Location: Evansville, IN
Posts: 10,280
The Monte Carlo ones are repopped and the Monte tub has the same roofline as the Cutlass Supreme.
https://www.opgi.com/monte-carlo/CHV4585/
They look similar enough I'd try them.
https://www.opgi.com/monte-carlo/CHV4585/
They look similar enough I'd try them.
August 16th, 2018, 09:08 AM
#9
Registered User
Join Date: May 2008
Location: Austin, Texas
Posts: 3,134
The Monte Carlo pieces appear to be shorter than the Supreme pieces...I'm referring to the horizontal length.
Still, they may work but I could see where you would need to drill a new hole in the back window "crossbar" as the difference in length puts the screw hole in a different position.
Still, they may work but I could see where you would need to drill a new hole in the back window "crossbar" as the difference in length puts the screw hole in a different position.
August 30th, 2018, 08:14 PM
#12
Registered User
Join Date: Nov 2006
Location: McMurray, PA
Posts: 1,781
"I'm sure I have an extra one or two in my Supreme parts stash. If you're interested, I'll take a look.
Terry"
Yes please see if you have both. You can contact me via email ajfink57@msn.com
Terry"
Yes please see if you have both. You can contact me via email ajfink57@msn.com
Terry
Thread
Thread Starter
Forum
Replies
Last Post
