Send me a PM with your address so I can include shipping costs. It may be next weekend before I can look for the items.

John

 

Sent pm

 

'66 442, I need the a/c control unit on the dash.

 

Sorry, a while back I shipped all my 1966-67 instrument panel/dash parts to Ron Roth. You might check with him, he goes by rroth1 on this site.



John

 

I sent my dash to Ron to restore yesterday, that's when I realized that part was mia, he said he doesn't have any real nice ones. I just remembered something else I need, 66 F-85, I need the left rear rocker molding.

 

do you still have a th350 in working condition

 

Yes I do, but unless your close by shipping costs could be more than what its worth. I'm located in Medford Oregon, about 30 miles from the California border along Interstate 5

John

 

Could ya see what shipping would be to 29418 I'm in sc

 

Are you up and about yet from your surgery? I hope is all doing well. I've been through so many that I'd hate to see what the total bills were at the end.

I'm still looking for a passenger side set of bucket seat tracks. The tracks off of a bench will work, but I need a set in good condition. If you have a set, please e-mail me at kweimer@woh.rr.com

 

you wouldn't happen to have a good set of rocker arms for a 64 330 would you?
thanks brad

 

Hi Kevin
I'm walking pretty good, but still can't get down on the ground and crawl around the cars yet. I've got good insurance, but the pain was to the point I didn't care if I had to make payments for years, I just wanted the pain to stop! I might have a 1965 bench seat, would the rails on that be the same?

Brad, I've got some loose #1 heads with the rocker rails off and a complete 1964 engine. But since I've never heard them on a running engine I don't know how to tell if they're good or bad. If you could tell me what to look for I could check them. John

 

John,

Whatd'ya get cutout?



I'm going to sell my crunched 69 Cutlass Supreme ..
Thought I'd give you dibs since you have a nose for it.
455 runs good, just sitting in my yard.
I bought the "General Lee" and need some cash to fix it


Mike..

 

Hello Mike
The knee joints were toast, so now I've got metal and high tech plastic in place of the natural stuff. Call me when you have a minute, I would like to talk with you about your 1969 Cutlass. John

 

Do you have the front parking/turn signal light lens for a 64 jetstar 88? Also do you have a good set of 1/4 panels for a 64 jetstar 88? Thanks

 

Sorry, I don't have any 1964 Jetstar parts at this time. Have you checked with Dalton to see if he has anything?

https://classicoldsmobile.com/forums...ire-parts.html

 

Thanks for the link

 

Good Evening, I am in need of a double KH keyed Power Steering pump pulley and the 3rd bracket that attaches to the right side of bracket that's on the pump. Can you help me with that? I have a `68 455


Thanks


Anwar

 

Hello Anwar
I probably do, it sounds like your using the 1968 style pump. Do you have the 1968 style brackets on it too? If your not sure I can post pictures of the different brackets. John

 

Hey there, I believe I have the 68 bracket setup. When I bought the pump i told them a 68 olds. Its the bracket that attaches to the manifold. If you have pics that would allow me to confirm what I think I'm talking about. I'll get them as soon as possible.

 

looking for 67 olds 98 speedometer cable.. the kind that goes to the hub, looks like i might be needing the 'special' cap that spins the cable in the hub too. thanks.

 

Sorry, I don't have a cable at this time. I may have the dust cover, I'll look this weekend. You may want to create a parts wanted thread to see if one of the other members here has one. I believe this one on ebay would fit, but its not cheap

http://www.ebay.com/itm/1963-64-65-6...e63631&vxp=mtr

 

no need on the dust cover.. thought I had thrown it away but luckily I didn't. If only I had known switching to chrome dust caps would have caused all this trouble.

 

Does your power steering pump look like this one?
P5100720.jpg


Are you still needing the bracket that attaches to the exhaust manifold?

 

Yes it does. and yes I am. I'll PM you with my address. One other thing. I have both PS pump and the alternator on the same side but dont think Im going to hook my A/C up now. Do you have a passanger side alt bracket?

 

Hi John! Looking for a 71 Cutlass lower taillight lens. Thanks and have a great day!

 

Hi Darryl
I should have some of those. Let me dig around to see what I've got and then I'll send you pictures to see the condition. John

 

If you still have the 15 inch rallys I'll take them!

 

Sorry, I don't have any available at this time.

John

 

Would you have a power window master switch for a 1967 Toronado?

Thanks,
Tom

 

Any chance you have a set of black seat belts for a 64 Cutlass?

 

Tom, I believe I do have the power window switch. I'll look tomorrow to see what I can come up with.

AntG, sorry I don't have an extra set of black 1965 seat belts. Last month there was someone on ebay with several different colors of 1965 style seat belts. I thought his prices were high, but they did look nice. You might check there and/or create a parts wanted thread here on CO

John

 

need a steering column (FLOOR SHIFT ) for 65 442 you got one??

 

need door panels for 65 442

 

Anything on the PS KH pulley and manifold bracket?

 

I've got the pulley but am striking out on that little arm bracket. Man I know I should have one for every power steering pump, but I may have sold several of those by themselves.

Oldspackrat (Scott) mentioned he needed to sell off a bunch of stuff, you might give him a try. If he gives you a good price on both items you might save on shipping rather than one piece from me and one from him. Just let me know what you decide to do. John

 

Sorry, I've got a couple column shift but no good floor shift columns. I don't have any usable door panels either. If you haven't tried a parts wanted thread yet I'd encourage you to give that a shot. John

 

Hi John, anything on that lower taillight lens for my 71 Cutlass? Thanks!

 

Will do John.

Thanks for your help


Anwar

 

I have a 1965 F85. I am looking for a set of front bucket seats that are repairable and a stock black steering wheel complete that can be restored. Also a straight rear bumper.


Thanks for any help!

 

Darryl, here's what I've got. I wasn't able to find the right sized box to ship it yet, but will try to come up with that this coming weekend. I don't think the lens is milky, I think that's just road film. If this will work for you please send me an email with your shipping address and I'll get the total costs, purchase plus shipping for you. John

P5260592.jpg

P5260593.jpg