OK Alan, I'll see if I can match that.

John

 

John,

Nevermind, I found one local.

Thanks,

 

Hi John,
Looking for 1 L/H headlight housing (Plastic) for 71 Cutlass.

Thanks,
Tommy23t

 

do you still have the #5 heads

 

.

 

Alan, I'm glad you were able to find one. I looked this past weekend but hadn't had luck yet.

Tommy, sorry I don't have the part you need. These are typically very brittle and hard to find used ones in good shape.

shakyhands, I replied to your PM




John

 

I'm looking for a right side door for a 2 door 63 F-85 cutlass

 

Surner registered user. would you have a water pump pulley for a 1963 or 1964 394 olds engine

 

would you by chance have a left and right outside turn signal lenes for a 68 delmont/delta?

 

hi do you have a left tail light assy for 67 cutlass 2dr also looking for a good dash pad. and a console and shifter.


also looking for a left front fender eye brow moulding

 

ftworavens1, are you looking for 1963 or 1964 parts? I may have 1964 parts but wouldn't have the 1963.

Surner, sorry but I don't have any 394 parts. I've got some from a 324 but suspect they're different.

delmont, are the ones you need mounted in the front bumper?

silverfox, I should have the tail light but its got bad bumps in the chrome. I may have a console, but don't think I've got a shifter, dash pad or eyebrow. I believe the dash pad is being repop'ed, maybe the parts place? Almost all the original ones are cracked.

John

 

 

Hello, do you have any rocker moldings for a 66 olds dynamic also looking for a rear bumper

 

no, i need the ones on the front corners of the fenders. From what i've seen their 68 only.

 

Any parts for 73 delta 88?

 

Hello do you happen to have a 400 e block?

 

rod1589, I have a few odds and ends but not much. If your looking for something specific send me an email or PM and I'll see if I have it.

ryneves, sorry I don't have an extra 400 E block. Since shipping can add a couple hundred or more to the purchase price I'd encourage you to create a parts wanted thread and include your location, or at least the nearest large city and state or province. Then hopefully someone nearby will have one they'll sell you.


John

 

Thanks john, good advice ill do that right now.
Ryan

 

Have you got "Delta" & "88" fender emblems for a 1975 Delta 88? I believe the '70-76 are the same.

 

John,,

Did you find me a front clip yet for my 69 Cutlass ?


or at least a fender?


Mike.. in G.P.,OR

 

Big John,
Do you have the rear glass mldgs for the 68/69 Cutlass/442
all 3 pieces.

Gene

 

do you have shorty headers for a 72 cutlass rocket 350?

 

Mike, good meeting you!

Gene, I should have but need to dig around to see what I have.

clay, sorry I don't have any shorty headers at this time.


John

 

Do you have a converter/flywheel cover for 70 cutlass th-350?

 

I do, but it would likely be next weekend before I can dig one out for you. If you can wait send me a reminder on Friday. If you want one sooner I'd encourage you to create a parts wanted thread. These are common items and I'm sure several members here have extras.

John

 

Hi, I'm looking for rear seat belts for convertible (lap belts only) Cutlass 1971/2. Buckles and bolts would do as I can get them re-webbed.

 

John, just let me know when you run across a set of glass mldg's. when you get a chance.
Make a note for me, next time you are out in the yard.

Gene

 

How are you set for a non clutch fan blade for a Cutlass Supreme 455? Thanks.

 

im looking for a driver side fender as well as convertible tack railing

 

sorry bout that its for a 66 oldsmobile convertible with 425 engine 400 transmission

 

in need of right fender convertible parts and a 425 4 barrel intake

 

I really need a power steering pump and or just the reservoir for my 1964 cutlass w/ 330 4-bbl. Mine leaked took it off to replace pump and found someone had welded the pump to the reservoir.... asap please
Denny Gormally
612-824-2405

 

by any chance do have a front bumper for a 64 f85

 

Denny, I think I have an extra one but will need to dig around this weekend to make sure

brick, I have one that's pretty bent up, but not rotten. If you plan to have it replated I believe it could be straightened. But if you want something you can bolt on a drive I can't help you.

John

 

Do you have a pair of bolt on caps for 14" SSII wheels?

 

do you have any interior door panels and arm rests for 62 Starfire?

 

I am looking for some big valve C heads for my 455 build. Do you have any and what would be the cost to ship to 43207?

 

Do you have a 67 rally gauge?

 

Sorry guys, I've not checked this thread lately.

Oldsmobility, sorry I don't have any extra bolt on center caps.

texkiernan, sorry no Starfire parts at this time

69OldsS, I've got both big and small valve C heads. Big valve price would be about $175 a pair, about $70 each to ship to you. That's with the rocker arms removed, add another $12.95 for a medium flat rate box with those parts. But if you plan to have work done to them you can take a set of small valve heads and have them cut out for the larger valves. The factory only had one casting, then they cut them out for the application. Check with your machine shop as small valve heads are cheaper and a tad more common. You may also want to post a parts wanted thread with your location. Lots of members here have spare parts and there may be someone close by who has them and can save you shipping costs.

ryneves, sorry I don't have a 1967 rally pack.

John

 

69OldsS, in my opinion, in a mild build and on the street, small valve heads, you never ever see or feel the difference between small or big valve.
Now if you are build something with some major power, than I can see the need, but you should be doing some port work also.
AS "John" has said, a competent machine shop can install the bigger intake valve super easy, as since you are doing that then install bigger exhaust valve also.
Just how much you want to spend and how much power do you need, just my opinion.
Sorry to hijack the post.

Gene