Hi Tom
This came out of either a 1966 or 67 Toronado, and I believe they interchange. I've not tested it, but if you get it and it doesn't work I'll refund the purchase price. So you'll be taking a risk on the shipping costs. I'd like $15 plus shipping for the part, here's a couple photos. Let me know if you'd like to see any other views/angles. John

P5250545.jpg

P5250546.jpg

 

Define repairable! I may have a set of bucket seats that need everything. The frames are solid and I believe the rails are good too. But the seat covers and foam biscuits are shot.

I'll have to check on the steering wheel. Also the rear bumper, I don't know if I have one that's straight but I'll dig around this coming weekend and let you know what I come up with.

John

 

John,

Thanks for the reply. I'm going to pass on the switch. The guy working on mine is going to try to rebuild it.

All my best,

Tom

 

Do you have the top air cleaner lid for an open element air cleaner '66 442..

 

Sorry, I don't have the air cleaner top you need.

John

 

thanx for responding... Bill

 

Do you have a set of 15x7 bolt on SSII wheels?

Sean

 

I'm sorry Sean I don't have an extra set. But by the price used ones go for you may not be far off from the price of having a set made. You can take the center out of a 14X6 or 14X7 and have it welded into a 15" blank. Then you can choose 15X7 or larger like the 15X8 or 15X10. And not have to worry about rust pitting on the bead from old wheels.

John

 

2Blu,

My 72 Cutlass Supreme 442 is in the shop for repair and they are having troubles finding some parts. Can use aftermarket but I am interested in keeping as original as possible. Looking for 3 parts in particular.

1. Intake manifold for 350 CID Olds engine for 4BBL carb with Choke stove
2. Primary Vacuum Break for 4 BBL Rochester
3. 45 Tooth Sea Green Speedometer gear for auto tranny with both seals.

These are the descriptions they gave me. If you need more, please let me know.

Look forward to your response.

 

Hi Mortimer
I may have some of the items, but it would be a while before I can dig around to see what I have. Scott (oldspackrat) is having to reduce his collection due to city inspectors. You might check with him to see if he has these parts and can easily lay his hands on them. John

 

Howdy.
I was curious (I know it's a long shot) if you had a pair of headlight bezels for a 1967 Cutlass Supreme?

 

If you need a set in a pinch I need to get rid of my #6 heads already pulled if you want but work out a deal with tru blue first I'm not here to steal a deal

 

Yes I do, but it would be next weekend before I can dig them up.

75JAW, sorry I don't have the door panels you need.

Bill, send him a PM or email to see if he's still looking for a set.


John

 

Hey John, did you get my e-mail with my address?

 

Ok I didn't wanna rip a sale out from under you

 

Darryl, no I didn't get your message. Please try again.

John

 

John I need needle bearings for my driveshaft please

 

Bill, the only needle bearings I can picture related to the driveline are in the u-joints. Did you pull a cap off and lose some of the needles? If so it would likely be cheaper and better in the long run to buy a new u-joint at your local auto parts store and replace the one missing needle bearings.


John

 

I lost a few when I pulled the driveshaft out I need like 7 I need to get her running and stunned before I replace so if something g goes wrong I ain't out to much

 

But yes u joint sorry

 

Hey John, I hope you got my e-mail as I still need that lens.. Thanks!

 

Same story, shipping to 41101. Thanks!

 

Lens and diffuser on its way!

John

 

Let me check and see what I've got for loose heads.

John

 

Awesome, thanks John.

 

A long shot here,but due to a moron rebuilding the engine in my wife's Cutlass I just finished restoring,I need 4 rocker arm studs for a 64 330.No shaft on this,it's the 3/8 screw in studs.4 are trash.Thanks.

 

do you have any 76 cutlass front turn/park lamp housings?

 

Need a water pump for a 64 Dynamic 88. 394 no air. Thanks

 

Do you have a dash pad for a 69 cutlass s holiday? I think f85 is comparable too.

 

I recently obtained a 72 cutlass supreme and it seems to have electrical issues
I also now need a steering column for a automatic floor shifter. I'm glad to be on
This very informative forumn

 

Do you have a axle shaft from a 1966 f85? 10 bolt 8.2 ring gear, 3.23 to 1?

 

I've got some complete rear ends from the 1964-67, I doubt any have the 3.23 ratio. What part of the country are you in?

John

 

Sorry I haven't replied to this sooner. I've got some dash pads with cracks but nothing nice enough to use as a daily driver.

John

 

[QUOTE=2blu442;736757]I've got some complete rear ends from the 1964-67, I doubt any have the 3.23 ratio. What part of the country are you in?

John[/QUOTE

I just need the axle shaft.I bent It foolIng around...lol..I live in Nebraska. Do you ship parts? Have a website or ebay?

 

[QUOTE=cutty66f85;736763]Well, if I pulled one then the rear end would become a parts rear end and not something I could sell complete. I don't know what it would cost to have a new axle made, but bottom line I'd want $100 for the whole rear end. Not sure I could sell what's left so I'd need the same price for a single axle, plus shipping. I'd hope you could have a new one made for less than that, but have never had it done so I don't know. John

 

Im looking for 67 cutlass rear bumper?

 

Looking for a rear bumper for a 76 Cutlass Supreme, anybody know of any for sale I would greatly appreciate the lead.
Nec

 

I've got a 1967 bumper, but its the Supreme style with the backup lights in it. If that will work for you send me a PM with your email address and I'll send you some photos.

Sorry, I don't have the 1976 bumper. I've had other 73-77 bumpers and know with the support behind them they weigh close to 100 pounds each. If you can find some close by you'll save a chunk of change on shipping. I'd encourage you to create a parts wanted thread, and post your location or the nearest big city.


John

 

do you have a radio cover plate that would fit a 74 cutlass supreme?

 

looking for front bumper support brackets / rods for a '69 Cutlass?