When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Al, the fender I have would need some work and the bumper would be a core needing replated. If that will work for you send me a PM with your email address and I'll send you some pictures.
John
I found the parts last week. I will, however pass the info on to a friend that may need them. The resto work would be no problem. How much do you want?
Located in Medford Oregon, that's along Interstate 5 just above the Oregon/California border.
Rebuilder engines:
330, 350, 425, 455 price ranges from $100 up
Loose heads, #2,3,4,5,6,7,8 and C,E,G,Ga,J price ranges from $25-$100 each
Cranks, blocks, tin, etc.
TH350, TH400 and 2 speed trannies, $25 up
Rear ends, non-posi highway gears, $75 each
SSII 14X7 bolt on and snap center on rally wheels, $10-35 each
SSIII 15X7 snap on center rally wheels $25 each
Doors, Fenders, Deck Lids, Grills, interior parts for 1964-77 Cutlass/442
Prices are for pickup, to ship I may need to add a little to cover my time.
Always open to trades, as it says at the bottom everything is a project car except the tow vehicle so I'm needing parts too! John
Looking for sail panels for a 1975 olds 442 do you have any
Ok thanks. I don't mind paying the shipping if I need to. If I can't find one closer I will reach back out to you and we can get something worked out. Have you ever shipped via Greyhound? usually about $100 that way, it's like paying for a bus ticket. How much asking for it?
I'm in need of a 1966 oldsmobile four core radiator.It would be nice if someone had one to sale.Thanks!
I would encourage you to create a parts wanted thread. If you don't need numbers matching 1966 into the mid-1970's at least will interchange. It would be much easier to find a 4 row from a later model car..
I just remembered, I have a couple 4 core radiators from Chevy pickup trucks. I believe they would bolt in and function if that would work for you.
Hello,John I'm in need of a four core radiator for 1966 oldsmobile.If you have one available could you give me a price I'm located in Houston ,Texas.Thanks.
I need for my 66 F85 wagon, the right front passenger side window track where the regulator rides in. Also need the wiper switch for 2 speed wipers.
The window sits in the long piece and the regulator track should be attached to it but it rusted away and fell apart. Please contact me at olznut@aol.com Thanks!
Last edited by 66 Olznut; Oct 20, 2015 at 12:19 PM.
It will be next weekend before I can look. But I'll get back to you all with photos and details on the radiator, the window channel if I have one, and I don't think I've got extra bolt on center caps. Shuhong Sun, if you haven't tried creating a parts wanted thread I'd encourage you to give that a shot.
It will be next weekend before I can look. But I'll get back to you all with photos and details on the radiator, the window channel if I have one, and I don't think I've got extra bolt on center caps. Shuhong Sun, if you haven't tried creating a parts wanted thread I'd encourage you to give that a shot.
John
Sorry, I'm new here, so I don't know what is part wanted thread.
Thanks!I'm in need of a 1966 oldsmobile f85 heavy duty radiator 4 core.Can you give me a quote I live in Houston,texas.Thanks!
Originally Posted by 2blu442
I would encourage you to create a parts wanted thread. If you don't need numbers matching 1966 into the mid-1970's at least will interchange. It would be much easier to find a 4 row from a later model car..
I just remembered, I have a couple 4 core radiators from Chevy pickup trucks. I believe they would bolt in and function if that would work for you.
4 core radiators did not come in 66-67 Cutlass the largest from the factory was a 3 core. 68 and up had 4 core radiators and the top plate and bottom supports were different to clear the larger tanks. John is right there is many GM applications that used 4 core radiators that would fit with some minor modifications.
Hello, I'm in of 1966 olds vista cruiser 330 flywheel.Thanks.
Originally Posted by 2blu442
Located in Medford Oregon, that's along Interstate 5 just above the Oregon/California border.
Rebuilder engines:
330, 350, 425, 455 price ranges from $100 up
Loose heads, #2,3,4,5,6,7,8 and C,E,G,Ga,J price ranges from $25-$100 each
Cranks, blocks, tin, etc.
TH350, TH400 and 2 speed trannies, $25 up
Rear ends, non-posi highway gears, $75 each
SSII 14X7 bolt on and snap center on rally wheels, $10-35 each
SSIII 15X7 snap on center rally wheels $25 each
Doors, Fenders, Deck Lids, Grills, interior parts for 1964-77 Cutlass/442
Prices are for pickup, to ship I may need to add a little to cover my time.
Always open to trades, as it says at the bottom everything is a project car except the tow vehicle so I'm needing parts too! John
Chris, sorry I don't have the grill panel you need. If you don't find it here you might check over at: http://73-77olds.com/ That site is focused on your vintage of cars.
Stan, sorry life got busy and I lost track of your request. I'll send you some details on a truck 4 row radiator that you could make work.
442fanatic, sorry I don't have the drip rail moldings you need. As with Chris if you haven't found the 73-77 site you may look there too.
Mike, I replied to your parts wanted thread. I've got two 1964 core engines but they're both 4bbl engines. What is the item your looking for that needs to come off a 2bbl engine?
44040dart, I've got the wheel well trim but it will be the weekend before I can dig it out and find a box for shipping costs. If you haven't found one by Saturday morning please let me know.
Terry, some of the photos you were viewing may be pretty old and I may no longer have those items. Please send me a PM or email with more specifics on what your looking for.
Would you by chance have a good hood trim pieces, up by the windshield. My old plastic one is yellowed.. Heard there might be a slight earlier year that was stainless and fit.
I would encourage you to create a parts wanted thread. If you don't need numbers matching 1966 into the mid-1970's at least will interchange. It would be much easier to find a 4 row from a later model car..
I just remembered, I have a couple 4 core radiators from Chevy pickup trucks. I believe they would bolt in and function if that would work for you.
John
Happy Holidays! I'm looking for a heavy duty radiator, for a 1966 olds 330 engine.I've been looking for a while so if I can get a 3 core heavy duty in good shape it would be appreciated. email at chance_gypsy@yahoo.com. It would be nice if I could get a quote also.Thanks!
Have any good sheet metal for a '73 olds cutlass S / Hurst olds
I've got a nice fender, the panel above the grills, both with 442 emblem holes. Then I've got a set of tail lights. That may be it for sheet metal at this time.
1966 olds radiator
