mcc8

Looking for a complete set of a/c brackets for my 64 Dynamic 88, any help?

2blu442

Sorry, I don't have what you need. If you haven't tried a parts wanted ad yet you might give that a try. Another thought might be to call this wrecking yard in Northern California, he's got a lot of Oldsmobile parts cars. John

http://redding.craigslist.org/pts/5626225421.html

mcc8

thanks John

Four Hundred Forty Two

Looking for 66-67 rally-pac (tic-toc tac). Also power steering brackets for same years.
Thanks, Gordy

2blu442

I may have the power steering brackets but not the rally pack.

You might check with Ron Roth, (rroth1) as he's been restoring 66-67 instrument panels. I know he had a setup a while back, I don't know if he still has it or not.

John

Montana80

Hello i need a dashboard for my 1975 cutlass supreme and a right door window and the tellight on the driver side can let my know the prices if you have any of these parts thank you and have a blessed day

mcc8

Montana80
you're sending your request to the wrong person. contact 2blu442 directly not on this post.

2blu442

Sorry, I don't have the parts you need at this time. You might check with oldspackrat or create a parts wanted thread to see what other members may have.

mcc8, if your following the thread anytime someone posts to the thread you will get a copy of the message.

John

mcc8

I was pointing out to a newbie that he should create his own want ad, not hijack someone's else s thread.

Cpriester123

In search of a posi rear end for my 1969 Cutlass S

2blu442

Are you looking for the Type O or just one that will fit? Depending on what gear ratio your looking for I might have one. But shipping across the country will add to the costs. Have you been keeping an eye on Craigslist? I know in my part of the country A-body posi rear ends show up every once in a while. Also, are you looking for a complete rear end to bolt under or would you be OK with a posi carrier & gears? It may or may not be cheaper in the long run to save on shipping just the carrier but then pay someone to install it in your housing, unless you have the skills to do that yourself. Just some thoughts. John

Cpriester123

Cpriester123

I should have been more specific so I apologize. But after doing research I believe I have a type O. I'm not positive but pretty sure. Maybe should be positive before I ask but I have a 1969 Cutlass S with the factory rear end still intact. And I agree that the carrier and gears would be cheaper for shipping costs. The axle and everything else is good so the carrier to transfer into posi is all I would need. And as far as gears Im going to buy new gears to replace

Cpriester123

And I've searched Craigslist list for months and still nothing

Warhead

What do you want for a factory T-350 BOP dipstick & tube, and factory carb style downshift cable for said T-350? Hate these leakers.
LMK, Jim in PHX.

2blu442

Jim, send me a reminder on Saturday and I'll see what I can come up with.
John

2blu442

I don't think there are new gears available for the Type O rear end. There's a member named monzaz who did a run of reproduction posi carriers for the type O and deals in used/restored parts. I'm not sure what he has at this time, but I'd encourage you to send him a PM or email to see what he might have that would work for you.
John

stanzaschance

Hello, I'm in need of a 1966 oldsmobile f85 deluxe 3 core heavy duty radiator.If someone has one available it would be greatly appreciated. Have a Merry Christmas and a Happy New Year! Thanks!

olredalert

----Hi,,,Im looking for a hood catch for a 1967 Cutlass. Bolts to the inside of the front of the hood. Small part that I apparently lost, and now need.....Badly! Pleas call me as I don't get on this website very often. 810-four 20-0431.......Bill S

2blu442

stanzchance, are you looking for something good enough to bolt in a use, or would one needing rodded or even a new core work? I believe you need side tanks, correct?

olredalert, I believe I have what you need. I'll try to locate it first, then give you a call if I come up with it.

John

stanzaschance

Hello John, I'm in need of the one with the side tanks. I really do appreciate it if you have one. Especially if it's one that's ready to drop right in. Thanks!

olredalert

----Thanks, John!.....Bill S

Ceegee424

I need a water pump pulley for a 73 delta 455.

stanzaschance

2blu442

Pulleys need to be matched to a set or they'll have problems. Do you have a complete set with a damaged water pump? There's also three lengths of water pumps, has yours been changed? Please check for the code stamped into the crankshaft pulleys and water pump if you have it, let me know what that is and I'll try to match the water pump pulley with the correct one. John

11971four4two

any New old stock for 1971 1972 cutlass???

Ceegee424

My Delta has been sitting in a shop for a year just to get the factory rebuilt remote put back in. I've taken him a flywheel, fuel pump, 2 water pump pulley's, starter. Now he's saying the water pump pulley doesn't work with my setup with the axle compressor. I sent him a 2 belt pulley like he asked that I found on eBay. It was aftermarket and I guess it didn't work because of that. He said I need an OEM part. What would you recommend? Please Help

2blu442

Sorry, lots of used stuff I've collected over the years. If there's any NOS parts they're buried deep in the garage. Once I retire though I do plan to go on a major cleaning and organizing binge! I'll keep you in mind if I do come up with something.


John

2blu442

OK, before you waste any more money on parts that don't fit lets try to key this out. What's the axle compressor?, do you mean Air Conditioning compressor? There are three different water pump lengths that could be on the car. They are measured from the flat where the mate up to the timing cover plate, to the flat where the fan or fan clutch attached, the round piece on the end of the water pump. Check out this thread

https://classicoldsmobile.com/forums...p-lengths.html

If you can let me know which water pump you have on the car, if it has AC or not, then ideally get the two letter code off the crank shaft pulley. That will give us the best chance of matching it. John

11971four4two

doctor john
as always thanks



Thank You
b

Ceegee424

I apologize autocorrect turned AC to axle. Thanks for the info. I will get back to you.

Adam Lewis

1967 fender(s) still available??

2blu442

Yes, I still have some 1967 fenders. Which side are you needing? What kind of condition, will you accept something with rot at the heel but a solid support, or are you looking for something with no rust through? And lastly what part of the country/world are you located in? I believe there's several members here with 1966-67 fenders which will interchange if you swap out the fender extension. You may be able to find what you need close to your location and save on shipping costs. John

Adam Lewis

I'm looking for both fenders, minimal rust repair is wanted but not necessary, straight fenders are also wanted but shoot me some pics when you get time. adamlewi83@gmail.com. Price?

benchracerx

looking for heater core box for 67 cutlass. the inside part under the dash.

Adam Lewis

I've got one...going to replace with vintage air

benchracerx

What Vintage Air system are you using? I looked but didn't see anything for a 67.

2blu442

In 1967 the box under the dash is different on AC cars and non-AC cars. Which one are you looking for? John

benchracerx

Non AC

2blu442

I should have an extra one. I'll dig around and post pictures of what I come up with. John