daddio65

You sent me a reply regarding a pulley, I was looking for a rear bumper for a 1964 Ninety Eight... Thanks, Jeff

oldspower619

im looking for an 64 65 frame or rolling chasis, if possible to ship it and the cost to cali 91911.

2blu442

jford721, I do have some parts from a 1973 Olds 98 and a 1971 Delta 88 engine compartment. I believe the compressor and brackets are the same as the A-body, the hoses are likely different. So purchasing a compressor with brackets close to your location would save you some coin on shipping costs.

daddio65, sorry I don't have the bumper your looking for. If you haven't made a parts wanted thread yet I'd encourage you to. Then every so often check the post and if you've not got replys post one yourself to bump it to the top.

oldspower619 I replied on your parts wanted thread.

For the other parts requests I'll be looking and taking pictures of whatever I come up with.



John

2blu442

batmobile67, I have both pullys. If your still looking for one send me a PM (private message) with your address and I'll get a price including a shipping cost for you. Also, these are both on pumps with brackets, so if you want the whole unit I can provide that or just the pully.

John

garyfoust

looking for a rear passenger door panel for a 1967 cutlass 442 in black. If you have one price with shipping to 45030 Ohio. Thanks!

2blu442

Hi Gary
If I have one its likely warped and suffered water damage. But if you need the metal strip to use on a repop panel I may be able to help.

John

garyfoust

John That will workif the rear passenger door panel is blk. Would use until interior is ready to be reworked. What would the Price be in that condition , shipped to Ohio. My email is gfoust90@hotamil.com Thanks Gary

2blu442

Hi Gary
I'll have to dig around to see what I've got. There are some other guys here with spare parts so if you find one at a reasonable price from one of them go ahead and take it.

John

johnsw-31

Hello again john. just wondering if u had any luck on the dash. thanks for your time

George H 1949

Have you got right left front fender chrome molding for 1964 Olds F85? If so please contact me, at blanchiegeorge@yahoo.com by email, or call me at 903-935-6770.

Thanks,
George

2blu442

johnsw-31 I've got other dash pads and instrument panels. But the only black one with correct vents for the 1970 is damaged. You might try Eric (jensenracing77) or Scott (oldspackrat) as they've got a lot of parts.

George, I'll send you an email to make sure I'm thinking of the parts your looking for.



John

Rios69Cutty

Do you have fenders for a 69 cutlass conv or know anyone who does?

2blu442

Sorry, I don't have any extra 1969 fenders. If you've not found them yet I'd encourage you to create a parts wanted thread and include your location.



John

joe68h/o

Do you have the lower deflector that mounts under the radiator support and also attaches to the lower front fenders for a 75 Cutlass Supreme. I believe 74 and 75 are the same.

2blu442

I might, but am not sure. I'll try to look around this weekend to see what I can find. If you've not created a parts wanted thread you might give that a try. I know there's at least a couple members here with 1973-77 vintage parts. Another site you may want to check out is 73-77olds.com It doesn't have as many members so it's not as active as this site, but they do focus on your vintage of cars.



John

The_Jeremiah

Well 2blue442 is gettin a little old, startin to forget things like which planet he is on... haha JK!!

I recently purchased a flywheel from 2blue, havent gone to get it yet, its sitting over at my dads place, Ill get it over thanksgiving, really good dude to do business with, he put up with my crap. haha!

stk1217

Hi,

I'm looking for the rear windshield exterior trim for a 1977-79 Delta 88

Thanks Mario,

2blu442

Hi Mario
Several years ago I had a couple of those cars, but don't think I saved the back windshield trim. I'd encourage you to create a parts wanted thread asking for this trim. If you have it but its damaged it might be worth while posting a picture so others can see what the pattern on the trim is. There are a lot of members on this site and hopefully someone will have access to these pieces.

John

George H 1949

Hey everyone I am still looking for chrome molding left and right sides from front to rear for my 1964 Olds F85 2 door. If anyone has any of the chrome I would appreciate your assistance.

pogo69

any 69 am/fm radios for A body...?

lass4ken

Do you have any of the following:

Rear glass, filler piece that lies below the grill behind the front bumper, side panels for center console (red), chrome piece that lays on top of the center console, rear bumper. Let me know! Thanks!

2blu442

Hi George and Ken
I've got some spare parts for the 1964 but will have to look to see if I have what you need. Threejdsolds (also named John) has some 1964 project and parts cars. You might contact him as well to see if he has the parts available.



pogo69, sorry I don't have the radio you need. There's two on ebay right now for $250-279 which seems a little high, but not too bad. I'd encourage you to create a parts wanted thread on this site to see if someone offers one for less.


John

SkylinesSuck

Happen to have a pair of power window regulators for my '75 Cutlass?

celodog

i need a rear bumper, a very small piece of trim, and a radiator fan shroud for my 1965 cutlass

2blu442

Skylines, I've got a couple motors for that vintage but am not sure if I can lay my hands on the regulators. Due to my lack or organization I didn't label the regulators over the years (I'll remember what car that came out of.....)

celodog, I may have a bumper but it would be a core that needs straightened and replated. What is the trim piece you need? I'm sure I don't have the fan shroud.

I'd encourage both you guys to create a parts wanted thread if you haven't already. Skylines, have you explored the 73-77olds.com site? Not nearly as active as this one but it does have people focused on your vintage of car.

celodog

this little elbow trim piece is what i need.. the driver side one is on there, but not the passenger side.

trimpart_zpsaf7cba15.jpg

2blu442

I should have that piece if its painted steel. But if it's the stainless steel or alloy that's clipped onto the steel drip rail I may not. Which is it?

celodog

i believe it's clipped on

2blu442

OK, yes I think I have one. I'll see if I can get it off without bending more than just the tabs.


John

SkylinesSuck

I'm a regular over there and have a thread up already. Thanks for the tip though. Also, if you ever do figure out what regulator is what, let me know. I've heard rumors the 70-72's will work as well, but I'm not sure if that's correct. Anyways, thanks.

oldskyline

I keep getting a msg from you and I haven't asked about parts for a long time. I no longer have my 65 442 not for at lease 6 months now and I did post on this thread that very thing ( that my car was sold ) so please no more e-mails, thanks...

SkylinesSuck

Nobody is emailing you. The forum is automatically sending you an email every time there is an additional post because your settings are that like that by default. You need to go into User CP and adjust your preferences. Look for the type of notification you should receive to subscribed threads, or cleared out your subscribed threads all together. You can PM me if you need any specific help, or one of the mods can help you I'm sure.

2blu442

Sorry your still getting messages after you sold your car. Look at the email, is there a place at the bottom that says "To unsubscribe to this/all threads" Try that and if it doesn't work let us know. As skyline said one of us can help you to stop getting messages.



John

celodog

that would be awesome.. how is the chrome on it?

2blu442

I believe it's aluminum vs. pot metal that's chrome plated. I'll get some good photos for you to check out and see if the finish looks the same as yours.


John

celodog

sounds great, thanks!

1964droptop

Still looking for a Rocker metal trim for the passenger side 1964 Oldsmobile Cutlass convertible . Goes from the front tire under the passenger door to another smaller piece near the rear tire. Thanks
Denny G
MPLS MN

starfire

John,

Do you have a front speaker bracket for a 1968 Cutlass?

Thanks,

2blu442

celodog, here's a couple pictures of the clip. If you still need this send me a PM Next time I'll have to remember to wash my hands before taking pictures!
P1061109_zps61616f09.jpg

P1061110_zpsdcfa544d.jpg

Denny, check with threejdsolds, I think he's got the rocker panel trim.

starfire, I may. Do you know if the 68-69 are different from the 70-72? I'll look this weekend to see what I can find.


John

starfire

John, not positive that 70-72 are the same, here is a pic of a 68-69. I just need the bracket. Thanks,