ClassicOldsmobile.com

Notices
General Discussion Discuss your Oldsmobile or other car-related topics.

D-shaped PVC & Breather Grommets- ANyone have napa Pn's?

Thread Tools
 
Search this Thread
 
Old December 26th, 2013, 02:26 PM
  #1  
Ben
Thread Starter
 
RAMBOW's Avatar
 
Join Date: Mar 2009
Location: Snohomish, WA
Posts: 1,824
D-shaped PVC & Breather Grommets- ANyone have napa Pn's?
I need to pickup a new set of PCV & valve cover breather gaskets for a new set of valve covers- these are the D-shaped stock style. The online catalog for Napa doesn't list them if you search on 1970 or 1966 oldsmobile 442 as your application... but if i remove the vehicle and just search "pcv grommet" i see several that may be close.

Does anyone happen to have NAPA Pn's jotted down for the right ones?


Thanks!
Ben
RAMBOW is offline  
Reply
Old December 26th, 2013, 02:58 PM
  #2  
Registered User
 
Octania's Avatar
 
Join Date: Dec 2011
Posts: 7,286
GM 22532566
no luck today at gmpartsdirect.com

Napa 630-1052
63/64" round ID for PCV filter canister 1969+

For pcv vlave I have only
385283
"GROMMET, valve cover, for PCV valve, all Olds V-8
ID 7/16"
HELP! Brand # 42314 might be same
NON-GM WILL NOT WORK RIGHT- rubber too hard!

That last line was my experience, YMMV. No way was the PCV valve going in that HELP brand chinese POS
Last edited by Octania; December 26th, 2013 at 03:02 PM.
Octania is offline  
Reply
Old December 26th, 2013, 03:58 PM
  #3  
major noob
 
billmerbach's Avatar
 
Join Date: Sep 2013
Location: claremont, nc
Posts: 1,926
I have one or two laying around no rips or tears
billmerbach is offline  
Reply
Old December 26th, 2013, 04:42 PM
  #4  
Registered User
 
1969w3155's Avatar
 
Join Date: Aug 2009
Location: Muskegon, Mi.
Posts: 8,597
Fusicks has them.
1969w3155 is offline  
Reply
Old December 26th, 2013, 10:27 PM
  #5  
Ben
Thread Starter
 
RAMBOW's Avatar
 
Join Date: Mar 2009
Location: Snohomish, WA
Posts: 1,824
Thanks guys... I'll do some more looking.

I have a counter guy at my local napa who will likely order in all the possible ones and let me pick out the right ones... I was just hoping not to make him do that.

Originally Posted by 1969w3155
Fusicks has them.
Fusicks wants $10 each for them plus their usual $25 shipping charge for a couple items that could go in a $5 flat rate padded envelope, so I'm trying to avoid that.

Plus the fusick one I ordered 2 years ago split almost immediately, so hoping to find one made by a different mfg anyway.
RAMBOW is offline  
Reply
Old December 27th, 2013, 07:01 AM
  #6  
Registered User
 
RandyS's Avatar
 
Join Date: Apr 2012
Location: New Mexico
Posts: 2,972
The Parts Place has them for $8.00, and their shipping is cheaper than Fusicks. I ordered a couple and they look real good.
RandyS is offline  
Reply
Old December 27th, 2013, 07:42 AM
  #7  
MOTORHEAD
 
11971four4two's Avatar
 
Join Date: Feb 2011
Location: minnesota USA
Posts: 6,607
NOE 6301074 napa part number
http://www.napaonline.com/Catalog/Ca...074_0417240032
Last edited by 11971four4two; December 27th, 2013 at 07:48 AM.
11971four4two is offline  
Reply
Old December 27th, 2013, 08:38 AM
  #8  
Ben
Thread Starter
 
RAMBOW's Avatar
 
Join Date: Mar 2009
Location: Snohomish, WA
Posts: 1,824
here is my initial list:



NOE 6301364 - PVC Grommet- Support Wedge- .42" ID 1.71"OD http://www.napaonline.com/Catalog/Ca...364_0417215202
-----------
NOE 6301043 - PCV Grommet- wedge - .71" ID 1.225" OD
http://www.napaonline.com/Catalog/Ca...043_0432519328
----------

CRB 29117 - PCV Grommet- Deep wedge- no measurements
http://www.napaonline.com/Catalog/Ca...117_0198969950
----------

CRB 29118 - PCV Grommet - Deep wedge - no measurements
http://www.napaonline.com/Catalog/Ca...118_0198984921
-------------------------------------
----------------------
-------------------------------------
NOE 6301074 - Breather grommet- .97" ID 1.7" OD
http://www.napaonline.com/Catalog/Ca...074_0417240032
---------

CRB 29106 - Breather grommet - No measurements
http://www.napaonline.com/Catalog/Ca...106_0198965931
----------

NOE 6301052 - Breather grommet - .97" ID 1.7"OD
http://www.napaonline.com/Catalog/Ca...052_0417217912
--------

CRB 29109 - Breather grommet- Round bottom - Wedge shape - No measurements
http://www.napaonline.com/Catalog/Ca...109_0374666655
RAMBOW is offline  
Reply
Old December 27th, 2013, 06:48 PM
  #9  
Registered User
 
Octania's Avatar
 
Join Date: Dec 2011
Posts: 7,286
Rockauto.com

$8.27 the set, delivered to my door
I cannot comment on fit or quality, having not purchased these items as yet.
I do know that GM parts fit right and work right. In GM rocker covers.


~1" hole for filter canister
AIRTEX / WELLS Part # 2P1002 {#22532566, 385204, PCG102}
w/ 1 in. I.D. x 1-1/2 in. O.D.
$2.42


The PCV Receptacle
DORMAN Part # 42314 {#385283} ID: 0.486"; O.D.: 1.071"; Thickness: 1.248"
PCV to Valve Cover
$2.71
Octania is offline  
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Rectangle shaped hole above cam olds 350???
Al2011
Small Blocks
3
August 2nd, 2011 05:17 PM
SSIII Stamping decode and differences in D shaped Ring ???
arodenhiser
Wheels and Tires
11
March 28th, 2011 03:48 PM
Brake fluid resevoir grommets
Joeypete
Brakes/Hydraulic Systems
7
January 20th, 2010 07:09 AM
anyone have an OAI air breather base?
jensenracing77
Parts Wanted
3
February 22nd, 2009 07:02 PM
steering fun. WTF Napa?
J-(Chicago)
Chassis/Body/Frame
0
May 26th, 2008 08:51 PM
Back to Subforum
General Discussion
View Next Unread
Wish A Vet Merry Christmas




Advanced Search
Quick Reply: D-shaped PVC & Breather Grommets- ANyone have napa Pn's?


Reply Closed Thread Share

All times are GMT -7. The time now is 03:22 AM.