Convertible top pump install trick?
#2
First, put a little oil on the grommet. Then, if they are like my grommets, stick a small, blunt tipped object in the small hole on the top side of the grommet as you insert the grommet into the hole. This stretched the grommet and helped push it through.
I used a small drift punch. Do not use a nail or other sharp object since it will just puncture the grommet.
I used a small drift punch. Do not use a nail or other sharp object since it will just puncture the grommet.
Thread
Thread Starter
Forum
Replies
Last Post
viper771
Other Oldsmobiles
11
November 12th, 2011 03:38 PM