When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Hello everybody,
I come from Switzerland and have a 69 Cutlass S.
This was NOT assembled in Switzerland, but officially imported. It was built in Canada.
At the moment I'm going to build the GM Suisse story.
So I have a lot of information about that.
My English skills are rather limited. Please forgive any errors :-)
My Buildsheet found under the Rear Seat in the middle.
The Canadian "Buildshett" Called as " TAG 100 - Line Shedule TAG" .
1. Line ( upper ):
034 = Job Number
33687 = Division, Series and Body Style Info
EXLD = Export Left Drive
5959 = Lower an Upper Color, Meadow Green
937 = Interior Code, Front Bucket Seat Parchment Vinyl
530436 = Sequence Number Body Fisher, Oshawa Plant Start at 500'001
ARB = Rear Axle Type RB -> Chevy-Type 2.73:1
EQN = Engine Type, 350-Cui. V-8 H.C. 310-HP 4-bbl without A/C & W-31 for Automatic Transmission THM-350
TZZ = ?
A31 = Window Electric Control
A46 = Front Bucket Seat 4-Way El. Control
A51 = Bucket Seat
A82 = Heaf restraint - Seatback
A91 = Pull down - rear Compartment
B32 = Mats Floor front
2. Line:
B33 = Mats Floor rear
B93 = Chrome Door Edge ( not installed current )
D15 = Deluxe Interior
D33 = Outside rear view, LH Remote control
D55 = Floor Console
G66 = Ait Lift shock Absorber manual
G80 = Rear Axle: Positraction ( limited Slip Diff. )
4. Line:
U18 = Speed I/P kilo ( Km/h )
U35 = Electric Clock
VE1 = Rear Bumper Rubber insert ( in the corners or along the Bumper ? )
V78 = Less Certificate of Compliance Plate
X14 = Export preparation - Coating
X17 = Underbody oil spray
Y60 = Convenience Group
5. Line:
Y72 = Heavy Duty Cooling Equipment
1K1 = Unknow Code
GDY = Unknow Code