Cutlass S Holiday from Switzerland
#1
Cutlass S Holiday from Switzerland
Hello everybody,
I come from Switzerland and have a 69 Cutlass S.
This was NOT assembled in Switzerland, but officially imported. It was built in Canada.
At the moment I'm going to build the GM Suisse story.
So I have a lot of information about that.
My English skills are rather limited. Please forgive any errors :-)
Grtz Tom
I come from Switzerland and have a 69 Cutlass S.
This was NOT assembled in Switzerland, but officially imported. It was built in Canada.
At the moment I'm going to build the GM Suisse story.
So I have a lot of information about that.
My English skills are rather limited. Please forgive any errors :-)
Grtz Tom
#2
Hello Tom, and welcome.
I'm not an expert with Body Tags, but it does look as if your car was built in Oshawa Ontario Canada.
If that is correct, you can contact Vintage Vehicle Services, George Zapora, +1-888-467-6853, George-gm@vintagevehicleservices.com
GM Canada have excellent records.
I'm not an expert with Body Tags, but it does look as if your car was built in Oshawa Ontario Canada.
If that is correct, you can contact Vintage Vehicle Services, George Zapora, +1-888-467-6853, George-gm@vintagevehicleservices.com
GM Canada have excellent records.
Last edited by VC455; October 21st, 2017 at 11:12 AM.
#8
Hi Holiday69
nice car. i got a 70 cutlass and i am looking for:
https://classicoldsmobile.com/forums...-trim-tag.html
swiss regards
nice car. i got a 70 cutlass and i am looking for:
https://classicoldsmobile.com/forums...-trim-tag.html
swiss regards
#10
My Buildsheet found under the Rear Seat in the middle.
The Canadian "Buildshett" Called as " TAG 100 - Line Shedule TAG" .
1. Line ( upper ):
034 = Job Number
33687 = Division, Series and Body Style Info
EXLD = Export Left Drive
5959 = Lower an Upper Color, Meadow Green
937 = Interior Code, Front Bucket Seat Parchment Vinyl
530436 = Sequence Number Body Fisher, Oshawa Plant Start at 500'001
ARB = Rear Axle Type RB -> Chevy-Type 2.73:1
EQN = Engine Type, 350-Cui. V-8 H.C. 310-HP 4-bbl without A/C & W-31 for Automatic Transmission THM-350
TZZ = ?
A31 = Window Electric Control
A46 = Front Bucket Seat 4-Way El. Control
A51 = Bucket Seat
A82 = Heaf restraint - Seatback
A91 = Pull down - rear Compartment
B32 = Mats Floor front
2. Line:
B33 = Mats Floor rear
B93 = Chrome Door Edge ( not installed current )
D15 = Deluxe Interior
D33 = Outside rear view, LH Remote control
D55 = Floor Console
G66 = Ait Lift shock Absorber manual
G80 = Rear Axle: Positraction ( limited Slip Diff. )
3. Line:
JL2 = Brakes, Disc front
L74 = Engine H.C. 350-CID 310-HP 4-bbl V-8
M38 = THM-350 ( JL-Code )
M55 = Cooler, THM-350 Auxiliary
N33 = Steering Wheel, Tilt Type
N34 = Steering Wheel, Custom Sport
N40 = Power Steering
P81 = Tire, 7.75 - 14" 4-Ply Nylen ( current 245 R15 65 SS-ll )
UF1 = Map Lamp on rear view
4. Line:
U18 = Speed I/P kilo ( Km/h )
U35 = Electric Clock
VE1 = Rear Bumper Rubber insert ( in the corners or along the Bumper ? )
V78 = Less Certificate of Compliance Plate
X14 = Export preparation - Coating
X17 = Underbody oil spray
Y60 = Convenience Group
5. Line:
Y72 = Heavy Duty Cooling Equipment
1K1 = Unknow Code
GDY = Unknow Code
The Canadian "Buildshett" Called as " TAG 100 - Line Shedule TAG" .
1. Line ( upper ):
034 = Job Number
33687 = Division, Series and Body Style Info
EXLD = Export Left Drive
5959 = Lower an Upper Color, Meadow Green
937 = Interior Code, Front Bucket Seat Parchment Vinyl
530436 = Sequence Number Body Fisher, Oshawa Plant Start at 500'001
ARB = Rear Axle Type RB -> Chevy-Type 2.73:1
EQN = Engine Type, 350-Cui. V-8 H.C. 310-HP 4-bbl without A/C & W-31 for Automatic Transmission THM-350
TZZ = ?
A31 = Window Electric Control
A46 = Front Bucket Seat 4-Way El. Control
A51 = Bucket Seat
A82 = Heaf restraint - Seatback
A91 = Pull down - rear Compartment
B32 = Mats Floor front
2. Line:
B33 = Mats Floor rear
B93 = Chrome Door Edge ( not installed current )
D15 = Deluxe Interior
D33 = Outside rear view, LH Remote control
D55 = Floor Console
G66 = Ait Lift shock Absorber manual
G80 = Rear Axle: Positraction ( limited Slip Diff. )
3. Line:
JL2 = Brakes, Disc front
L74 = Engine H.C. 350-CID 310-HP 4-bbl V-8
M38 = THM-350 ( JL-Code )
M55 = Cooler, THM-350 Auxiliary
N33 = Steering Wheel, Tilt Type
N34 = Steering Wheel, Custom Sport
N40 = Power Steering
P81 = Tire, 7.75 - 14" 4-Ply Nylen ( current 245 R15 65 SS-ll )
UF1 = Map Lamp on rear view
4. Line:
U18 = Speed I/P kilo ( Km/h )
U35 = Electric Clock
VE1 = Rear Bumper Rubber insert ( in the corners or along the Bumper ? )
V78 = Less Certificate of Compliance Plate
X14 = Export preparation - Coating
X17 = Underbody oil spray
Y60 = Convenience Group
5. Line:
Y72 = Heavy Duty Cooling Equipment
1K1 = Unknow Code
GDY = Unknow Code
Thread
Thread Starter
Forum
Replies
Last Post