J-(Chicago)

My buddy Pete needed a block, so I broke down a 455 for him. Everything else is up for sale as now it has thrown up parts all over my shop. These take up a lot less room when in a nice tight assembled package.

Anyway, if anyone needs a part for something they are throwing together, let me know.

Head bolt set

stock push rods -Scrapped

Rocker arms, bolts and aluminum bridge sets -Scrapped

J heads, valves, springs, retainers -Scrapped

Stock rods&pistons 40cc dish

stock main caps -Sold

Iron intake, -Scrapped
Stock coil -Scrapped

many stock doodads that bolt to the intake.

timing cover, oil slinger, fuel eccentric -Sold

Nice cast crankshaft, balancer, and flex plate. - crank Sold -balancer sold

water pump

AC brackets and pulleys -brackets sold

Other special stock bolts and studs.

crazy'boutOlds

how about an exhaust crossover pipe?

J-(Chicago)

Sorry, Bill. This one didn't have any manifolds. Try sending a PM to Mike's 88 on Oldspower.
I gave him 2 or 3 xover pipes to test fitment on the butlass. Hopefully he didn't scrap em'

If you go to Walkerexhaust.com and email them, they should be able to give you a part number to order with at your local auto parts store.

If you have a 70's cutlass with a vin R , the walker part numbers are WK42243 and WK43658

J-(Chicago)

The guy I got it from said it was painted gold because it was in a 66'

don_69sbo

sent you a pm

getawaycar

Will that intake manifold fit on a 72 350? Or do you know if the small blocks take a different manifold?

Chris

J-(Chicago)

Small block intakes are smaller, sorry.
I might have one around the shop somewhere for you. I'll take a look.

getawaycar

I figured, but it never hurts to ask for sure. If you have a four barrel small block manifold I would be interested.

If you haven't seen the thread, Rambow is looking for all of the small parts for a 455. You should contact him.

Chris

dre

I've got a cast iron 4 barrel intake. $50 +shipping. Let me know if your interested.

J-(Chicago)

Bump.
anyone need the little pieces?

I believe the iron intake is 1974 #412753
It has a good coil bracket,
throttle return spring bracket,
egr valve,
72? valve cover harness hold down,
1971 vacuum tree/tcs
40cc dished pistons and rods
1964-67? power steering pump missing the cap.
Radio filter/capacitor
Weather is getting cold, so I will have my fall closeout garage sale/scrap run soon.

I want to thank RAMBOW for his patronage. Nice fellow to work with.

75cutty455

Do you still have any parts? I am in need of a KH power steering pump pulley that has the key slot or key hole. (hope I said that right)

J-(Chicago)

I know I wouldn't have any power steering pulleys floating around, as I always keep them on the pumps and trade/sell them that way.

Water and crank pulleys are a different story though. I have those darn things everywhere.

The pump that came with this one was from a 67' But I sold it already to a guy with a restoration project.

I guess the guy who I bought it from threw the wrong one in the box of parts, or replaced it a long time ago.

75cutty455

OK, Thanks for the response.

NastyNate6695

starter?

J-(Chicago)

Yes. starter is still here. I'll send you a pm.

Stevec

How about the intake valley shield?

hurstman1972

Do you have the mounting stud for the power steering bracket? In particular the lower one of two that hold the timing indicator to the timing cover. I need the spacer too, and the spacer that goes between the lower rear PS bracket and the block.

Thanks!