1964-77 Olds parts for sale
May 29th, 2017, 08:44 PM
#1841
Moderator
Thread Starter
Join Date: Sep 2006
Location: Medford, Oregon
Posts: 13,693
Streetrod, sorry but I don't have an extra set of 1964 Cutlass backup lights. If you haven't tried a parts wanted thread yet I'd encourage you to give it a try. Also keep a close eye on ebay as 1964 parts are hard to come by.
Ed, I may have them in a coffee can but the next couple weeks are looking pretty busy for me. I won't have time to look for them for a while. You'll need to find someone with a parts engine that they don't mind selling the bolts from. You might try contacting some of the other members here who sell a lot of parts, or create a parts wanted thread to see what gets offered.
John
Ed, I may have them in a coffee can but the next couple weeks are looking pretty busy for me. I won't have time to look for them for a while. You'll need to find someone with a parts engine that they don't mind selling the bolts from. You might try contacting some of the other members here who sell a lot of parts, or create a parts wanted thread to see what gets offered.
John
August 25th, 2017, 07:25 AM
#1845
Moderator
Thread Starter
Join Date: Sep 2006
Location: Medford, Oregon
Posts: 13,693
RocketV8, did you find the lock parts you needed?
Carl, I have some decent doors but I wouldn't call them super clean. They do have some rust but I don't think any rot through. I'll dig out some tail lights for you to consider. I've got core supports but the very best will have pitting under the battery box area. Most I've encountered have hole through in the battery box area. John
Carl, I have some decent doors but I wouldn't call them super clean. They do have some rust but I don't think any rot through. I'll dig out some tail lights for you to consider. I've got core supports but the very best will have pitting under the battery box area. Most I've encountered have hole through in the battery box area. John
August 25th, 2017, 08:49 AM
#1846
Registered User
Join Date: Mar 2010
Location: Mora, Sweden
Posts: 145
I found them at National Parts Depot for $12 but they have yet to contact me about shipping costs. I found them at OPGI as well but they wanted $120 for shipping! LOL! Sure I live in Sweden but come on!
Do you have any if I strike out?
Do you have any if I strike out?
August 25th, 2017, 07:03 PM
#1847
Registered User
Join Date: Oct 2013
Location: Glendale Arizona 85308
Posts: 65
trim
small world. i was born and mostly raised in Salem in 1944.my grandfather was a barber at the state capital. In the basement. he and dad were friends with senator mark hatfield. they did allot together. I am looking for the trim pieces that go on the fender,door and quarter panel down the side. they are about 1/2 inch wide. thank you. JIM
August 31st, 2017, 11:55 AM
#1848
Moderator
Thread Starter
Join Date: Sep 2006
Location: Medford, Oregon
Posts: 13,693
RocketV8, sorry life has been busy. If you don't find them at a reasonable price I should have them. If you still need them by mid-next week send me a message and I should have time to dig some out then. John
August 31st, 2017, 11:56 AM
#1849
Moderator
Thread Starter
Join Date: Sep 2006
Location: Medford, Oregon
Posts: 13,693
small world. i was born and mostly raised in Salem in 1944.my grandfather was a barber at the state capital. In the basement. he and dad were friends with senator mark hatfield. they did allot together. I am looking for the trim pieces that go on the fender,door and quarter panel down the side. they are about 1/2 inch wide. thank you. JIM
August 31st, 2017, 12:57 PM
#1850
Registered User
Join Date: Oct 2013
Location: Glendale Arizona 85308
Posts: 65
trim
Dear John, I am working on a 1965 Cutlass 442 2dr hardtop. I have some pieces of that trim. They are kind of banged up. What ever you have I can probably use. Thank you for the answer. JIM
September 20th, 2017, 09:16 PM
#1854
Moderator
Thread Starter
Join Date: Sep 2006
Location: Medford, Oregon
Posts: 13,693
September 30th, 2017, 03:45 AM
#1861
Registered User
Join Date: Dec 2014
Posts: 53
Located in Medford Oregon, that's along Interstate 5 just above the Oregon/California border.
Rebuilder engines:
330, 350, 425, 455 price ranges from $100 up
Loose heads, #2,3,4,5,6,7,8 and C,E,G,Ga,J price ranges from $25-$100 each
Cranks, blocks, tin, etc.
TH350, TH400 and 2 speed trannies, $25 up
Rear ends, non-posi highway gears, $75 each
SSII 14X7 bolt on and snap center on rally wheels, $10-35 each
SSIII 15X7 snap on center rally wheels $25 each
Doors, Fenders, Deck Lids, Grills, interior parts for 1964-77 Cutlass/442
Prices are for pickup, to ship I may need to add a little to cover my time.
Always open to trades, as it says at the bottom everything is a project car except the tow vehicle so I'm needing parts too! John
Rebuilder engines:
330, 350, 425, 455 price ranges from $100 up
Loose heads, #2,3,4,5,6,7,8 and C,E,G,Ga,J price ranges from $25-$100 each
Cranks, blocks, tin, etc.
TH350, TH400 and 2 speed trannies, $25 up
Rear ends, non-posi highway gears, $75 each
SSII 14X7 bolt on and snap center on rally wheels, $10-35 each
SSIII 15X7 snap on center rally wheels $25 each
Doors, Fenders, Deck Lids, Grills, interior parts for 1964-77 Cutlass/442
Prices are for pickup, to ship I may need to add a little to cover my time.
Always open to trades, as it says at the bottom everything is a project car except the tow vehicle so I'm needing parts too! John
September 30th, 2017, 09:59 AM
#1863
Registered User
Join Date: Jan 2012
Posts: 2,024
HI, looking for the heater hose support bracket for a 65 Cutlass. This is the small bracket that attaches to the passenger side of the valve cover and holds the heater hose firmly against the valve cover. 64 thru 67 should be the same. Thank you.
September 30th, 2017, 11:38 AM
#1864
Moderator
Thread Starter
Join Date: Sep 2006
Location: Medford, Oregon
Posts: 13,693
Hi Guys, sorry I hit one of those busy periods and haven't been on the site lately.
1partshelp, I'm sorry but I don't have any of the H trim. If your still looking I can suggest some people to check with, let me know.
tv442, yes I have a convertible deck lid with letters but it has some damage to it. If you'd like to see picture of it let me know and I'll post them here for you to check out.
1964 Oldsmobile F85, are you looking for a trunk floor or the trunk lid?
Stanzachance, I've got some TH350's but nothing that I've driven recently. They've all be out of the cars and sitting for a while, which makes me think they cannot be considered runners but just cores to rebuild. Early 1970's BOP TH350's are pretty common in my part of the country. Are you having trouble finding one in your area?
Bfg, I've parted several cars with 330's but am not picturing the bracket your describing. Can you find a picture of one to send me and I'll try to match it?
John
1partshelp, I'm sorry but I don't have any of the H trim. If your still looking I can suggest some people to check with, let me know.
tv442, yes I have a convertible deck lid with letters but it has some damage to it. If you'd like to see picture of it let me know and I'll post them here for you to check out.
1964 Oldsmobile F85, are you looking for a trunk floor or the trunk lid?
Stanzachance, I've got some TH350's but nothing that I've driven recently. They've all be out of the cars and sitting for a while, which makes me think they cannot be considered runners but just cores to rebuild. Early 1970's BOP TH350's are pretty common in my part of the country. Are you having trouble finding one in your area?
Bfg, I've parted several cars with 330's but am not picturing the bracket your describing. Can you find a picture of one to send me and I'll try to match it?
John
October 4th, 2017, 06:22 AM
#1867
Moderator
Thread Starter
Join Date: Sep 2006
Location: Medford, Oregon
Posts: 13,693
I replied to your email but it must have not made it to you. Yes I've got extra crankshafts including some that are drilled for the 4 speed. Please send me your email address through a PM and I'll send you photos. We can also discuss shipping through email. John
October 12th, 2017, 03:26 PM
#1874
Moderator
Thread Starter
Join Date: Sep 2006
Location: Medford, Oregon
Posts: 13,693
October 13th, 2017, 12:54 PM
#1876
Moderator
Thread Starter
Join Date: Sep 2006
Location: Medford, Oregon
Posts: 13,693
October 14th, 2017, 10:53 AM
#1878
Moderator
Thread Starter
Join Date: Sep 2006
Location: Medford, Oregon
Posts: 13,693
It sounds like you've got a lead on a gas tank. But if you decide to go with used I may have one. The only downside is I've not labeled them, so I don't know if this is from a 1964,65 or 66. But here's a few pictures. If this isn't right could you provide me with some measurements/details on how I can identify the correct tank? It's likely I still have the tank from the car you got the quarter panels off of. John
November 26th, 2017, 06:15 AM
#1880
Moderator
Thread Starter
Join Date: Sep 2006
Location: Medford, Oregon
Posts: 13,693
