1pr of fresh "J" heads that have been ported, bowl work done, large valves, heat crossovers blocked, surfaced, and have springs for up to .500 lift. Ready to bolt on, $500.00

1 set of new forged pistons, L2323 .030 for 455 with rings already loaded, missing one wrist pin. $200.00

1ea used Milodon 7qt oil pan with hi-volume pickup $100.00 SOLD

1ea new stock big block oil pan ( with baffle) $100.00 SOLD

1ea new Comp CAM OL 270 H hydraulic flat tappet cam .501 lift 270* advertised duration 110 lobe center $100.00

1ea Hi-Tech brand camshaft hydralic flat tappet (new) with new lifters (.842) for stock small block Olds replacement .400 lift 250* duration $150.00

1 set Harland Sharp new roller rockers part number S5001 $250.00

1pr Speedmaster polished aluminum sheet metal valve covers ( new in the box) $125.00

1set Edelbrock valve springs with retainers, locks, and shims as supplied on complete Edelbrock heads ( new) $75.00

1set Arias forged flat top pistons (used) .030 455 designed for 11.1 compression with iron heads. $150.00

1 set Pro Comp roller rockers with 8.500 3/8" pushrods and poly locks for aluminum heads on small blk Olds (used) 175.00

1set used 6" aluminum rods ( small block chevy rod journal) with CP 4113L forged pistons with domed profile and gas ports ( approx 14.1). This setup was used in a diesel block race engine with Bulldog heads $300.00

2ea W-27 rear end covers (1ea new @$100.00 and one used @ $75.00).

1ea GM chrome trans pan with drain plug for turbo 350 (used) $50.00

1ea Cloyes double roller chain and gears (cast cam gear) with pin hole drilled for offset bushing ( installed in engine but never run) $65.00 SOLD

1set .921 diesel hydraulic roller lifters (used) with the dog bones and spyder $50.00

1 set Sealed Power cast rings .030 for 455 5/64, 5/64, 3/16 (new in the box) $25.00 SOLD

1pr cleaned, magged and dissasembled 371 Olds cylinder heads. $100.00

1ea complete 394 Olds engine, disassembled, inspected, magged and good to go for rebuild..$400.00

1pr chrome "tall" stamped steel valve covers (new) $50.00

1pr chrome standard height stamped steel valve covers (new) $50.00

1set used roller rockers (brand unknown) with guide plates, poly locks, and 5/16 pushrods for use on small blk Olds with iron heads $150.00 SOLD

3sets of main cap reinforcement straps for Olds $25.00 / set

1pr 68-72 A Body upper control arms, powder coated blk, new ball joints, and new cross shafts, $200.00

1pr 70-72 A Body front disc brakes with new rotors, rebuilt calipers, new hoses, new backing plates, assembled on original spindles $300.00 SOLD

1pr Bilstein front shocks with 100miles for 1967 Chevelle ( too short for 67 Cutlass) $100.00

Contact Grant @ 951-906-7951 or email at grantw@sportsfacilitiesgroup.com

 

new stock oil pan
calling you on the phone

 

PayPal and shipping to Miami? 33179

 

PM sent

 

I do accept Paypal and depending on what it is you are interested in, most of the prices noted include shipping.

 

Sent email on disc brakes

 

Is the 394 400 shipped haha

 

$35.00 including the shipping. Please email me directly at grantw@sportsfacilitiesgroup.com and I will send you Paypal info.

 

Hi Jetstar, are you really interested in the engine? If so we can discuss shipping alternatives.

 

On the fence, I looked today and the cost to build one is hard for me to stomach. I'm thinking this car is heading a different direction pretty quick. I'll check back in asap if I end up in so cal soon with work. If it was convenient enough I would prob grab it just in case.

 

Sounds good.

Have a great Christmas