mondello 455 ported heads for sale c casting
Thread Starter
Registered User
Joined: Feb 2008
Posts: 133
mondello 455 ported heads for sale c casting
I have a set of heads ported by joe mondello SORRY PARTS ARE NO LONGER FOR SALE.................
finish ported week before he died
I have a lot of 455 engine parts
complete priemum top end with o4b h ported intake
new carb ect ect please e mail for details selling for.
little more than half of my cost have bottom end 455
block ect ect all parts are new unused except for castings...
thanks Dave
heads are ported street strip with filled crossover, welded center
exhaust port, stainless valves, modified for harland sharp roller rockers (have rockers new in box)
new holley 750 dual feed mechanical secondary carb
guide plates and studs new springs ect ect .
have port matched o4bH intake w finned edelbrock valve covers.
also matching 68 455 standard bore block.
with nodular crank cut 10/10
stock rods +pistons
7 qrt miladon pan w h/v pump bolt on pickup
22 25 h engle cam.
small windage tray
and oil restrictors
and timing cover.
main stud and strap kit
and whatever else i can dig out with it.
I have over 4 k in this 2750 or b.r.o.
thanks Dave
finish ported week before he died
I have a lot of 455 engine parts
complete priemum top end with o4b h ported intake
new carb ect ect please e mail for details selling for.
little more than half of my cost have bottom end 455
block ect ect all parts are new unused except for castings...
thanks Dave
heads are ported street strip with filled crossover, welded center
exhaust port, stainless valves, modified for harland sharp roller rockers (have rockers new in box)
new holley 750 dual feed mechanical secondary carb
guide plates and studs new springs ect ect .
have port matched o4bH intake w finned edelbrock valve covers.
also matching 68 455 standard bore block.
with nodular crank cut 10/10
stock rods +pistons
7 qrt miladon pan w h/v pump bolt on pickup
22 25 h engle cam.
small windage tray
and oil restrictors
and timing cover.
main stud and strap kit
and whatever else i can dig out with it.
I have over 4 k in this 2750 or b.r.o.
thanks Dave
Last edited by Daverd; Sep 17, 2011 at 05:39 AM. Reason: parts not for sale
Registered User
Joined: Oct 2010
Posts: 1,213
From: Dover, Ohio
I have a set of heads ported by joe mondello
finish ported week before he died
I have a lot of 455 engine parts
complete priemum top end with o4b h ported intake
new carb ect ect please e mail for details selling for.
little more than half of my cost have bottom end 455
block ect ect all parts are new unused except for castings...
thanks Dave
heads are ported street strip with filled crossover, welded center
exhaust port, stainless valves, modified for harland sharp roller rockers (have rockers new in box)
new holley 750 dual feed mechanical secondary carb
guide plates and studs new springs ect ect .
have port matched o4bH intake w finned edelbrock valve covers.
also matching 68 455 standard bore block.
with nodular crank cut 10/10
stock rods +pistons
7 qrt miladon pan w h/v pump bolt on pickup
22 25 h engle cam.
small windage tray
and oil restrictors
and timing cover.
main stud and strap kit
and whatever else i can dig out with it.
I have over 4 k in this 2750 or b.r.o.
thanks Dave
finish ported week before he died
I have a lot of 455 engine parts
complete priemum top end with o4b h ported intake
new carb ect ect please e mail for details selling for.
little more than half of my cost have bottom end 455
block ect ect all parts are new unused except for castings...
thanks Dave
heads are ported street strip with filled crossover, welded center
exhaust port, stainless valves, modified for harland sharp roller rockers (have rockers new in box)
new holley 750 dual feed mechanical secondary carb
guide plates and studs new springs ect ect .
have port matched o4bH intake w finned edelbrock valve covers.
also matching 68 455 standard bore block.
with nodular crank cut 10/10
stock rods +pistons
7 qrt miladon pan w h/v pump bolt on pickup
22 25 h engle cam.
small windage tray
and oil restrictors
and timing cover.
main stud and strap kit
and whatever else i can dig out with it.
I have over 4 k in this 2750 or b.r.o.
thanks Dave
Registered User
Joined: Dec 2014
Posts: 4
From: Saskatoon Saskatchewan
Mondello ported heads
I'm thinking of selling a set of heads ported by Joe Mondello. They are just cores and I've never used them. They are stamped by Joe. Contact me for more information. Serious inquiries only. the442@hotmail.com
Thread
Thread Starter
Forum
Replies
Last Post
1964F85
General Discussion
25
Nov 13, 2019 08:40 PM
Nickyloves442s
Parts For Sale
17
Jul 7, 2015 12:19 PM
71Cutlass S
Parts For Sale
0
Apr 1, 2014 10:15 AM
