Hi All
I used a sawzall to cut the shell up on the 1967 Toronado. The passengerside has no rot at the bottom behind the tire. The drivers side does. I'd like $250 for the passengerside, $150 for the drivers side. If you want me to cut them down and ship only the portions you need I'd be willing to do that. I've taken a bunch of photos and will post just a couple here. To see them all on my photobucket site: http://s90.photobucket.com/user/2blu...?sort=3&page=1

DSCN5894.jpg

DSCN5896.jpg

DSCN5900.jpg

DSCN5905.jpg

DSCN5877.jpg

DSCN5886.jpg

DSCN5880.jpg

DSCN5889.jpg

 

TTT, still have these. The passengerside looks good. The drivers side is rotting out at the bottom behind the wheel well. I cut them off a 1967, not sure if they fit any other years than 66 and 67. Located in Medford Oregon. Discounted if you pick them up. John

 

That is some pretty nice sheet metal John.

 

They don't salt the roads in Oregon, so unless a car spent time at the coast there's not too much rot. This Toronado ran and drove well, but the vinyl top had caused the roof to rust. First time I drove in a rainstorm I had a trickle, not drip but a trickle of water coming down near the inside rear view mirror!