When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Joe no luck on nos yet. Can you get me a measurement of the 2 door trim. Might have nice used for it. Also, can you take a photo for the 4 door trim and measurement? Same issue, I may have them but the books don’t show it clearly to see if I have 88 or 98 used trim. Diagrams look similar but I think should be different.
OK the door trim for the dynamic 88 is 49 inches long same style as what you’ve been sending me. The Delta 88 door trim is approximately 38 inches long each piece and 5 1/2 inches wide top to bottom… And here is a picture
Struck out on the 4 dr potmetal but I think found one side of the middle door trim for the 2 door. Definitely has issues so I’m guessing you don’t want but here’s photos.
Hey Pat. I have a 57 Olds 2 door starfire 98 and looking for two decent lower rocker mouldings. Part number 569929 is for both sides. What ya think? Thanks, Mark.
Any chance u know the measurements and have a detailed photo? None show up in inventory but I remember seeing some long 50sish rockers in the unIDed stash.
They are 77 1/2" long and about 1 1/4" wide. Both ends curve down the same. I can try to get a picture later if that would help. Thanks for your time. Mark.
Just added pictures front and back.
Last edited by zzcruzin; August 14th, 2019 at 04:38 PM.
OK Pat, I'm picking up yet another project, so now I'm looking for any or all mid body chrome and script/logos for a '65 Starfire. I have some of it but in so so shape, and would love NOS....no rush.
Hi Pat, would you happen to have these 2 die-cast moldings for a 1968 Ninety Eight? 7795208 (right 1/4-rear) and 230448 (right fender skirt.) I attached a pic to show what they look like. Thanks, Dave
That first weekend I will be here then headed to Hershey. Actually that first Saturday is really good if you have the time as it’s the fall festival only a couple blocks down with street vending odds and ends. That Friday night is a small car show and usually a band on the square. Saturday is the parade from 10 to 12ish. Not sure but I will most likely put a car in it and open the museum right after.
I'm definitely gonna shoot for that! I'm marking my calendar for the 5th of October! I'll PM you when it gets closer to make sure I have the right address and its still good for you!
New to the site and not sure if I am doing this correctly. A Charley Jones alerted methat you may have what I am looking for. Please refer to my post yesterday evening, under the screenname Jetstar88Conv. for details and part numbers of what I am looking for, Until I get used to navigating this site, might we communicate by personal Email, If so, yy Email is win4today@gmail.com
Where are you located? Also, I can give you my phone number also ,via a subsequent communication, if my post is unclear and it would facilitate matters. Please bear with me....................................
Pat, any chance you have 12.182 pn 384839? A nice used one works too. 64 SF tail panel.
Glen, I show one nos in inventory at $650. Not sure how nice it is but can dig it out if you want photos. There is one on the rear of a parts car I have but it needs some work. It would be much cheaper but unless you know how to work that aluminum, I’m guessing you wouldn’t want it. Let me know.
Just got a load of NOS side cast and stainless mouldings for 40s-50s-60s models. Very little Cutlass trim. Mostly 50-59. If you give me a part number I can look up if I have it. The parts are NOS, not concours perfect. Some still in original wrappers/ boxes and never installed. Prices vary on condition quality. Drop me a line whenever you need a part. Cheers
Hello, I have a 1965 Dynamic 88 convertible and I am looking for both sides door trim and rear dog legs that come off of the real wheel well between the door and front of the wheel well. Thanks
Yes. Thanks for looking up the numbers. 583668 and 583669 are what I need.
Not sure if you still need these rocker mouldings but I got a bunch of trim and have both sides NOS in inventory. Message me direct to 618-554-4362 and let me know. Regards Pat
Hello, I have a 1965 Dynamic 88 convertible and I am looking for both sides door trim and rear dog legs that come off of the real wheel well between the door and front of the wheel well. Thanks
I show 389579 in inventory, not the other. Message directly to 618-554-4362 and I will get photos. Regards Pat
August 10th, 2019, 03:11 PM
