OK the door trim for the dynamic 88 is 49 inches long same style as what you’ve been sending me. The Delta 88 door trim is approximately 38 inches long each piece and 5 1/2 inches wide top to bottom… And here is a picture

 

Struck out on the 4 dr potmetal but I think found one side of the middle door trim for the 2 door. Definitely has issues so I’m guessing you don’t want but here’s photos.

 

Hey Pat. I have a 57 Olds 2 door starfire 98 and looking for two decent lower rocker mouldings. Part number 569929 is for both sides. What ya think? Thanks, Mark.

 

Any chance u know the measurements and have a detailed photo? None show up in inventory but I remember seeing some long 50sish rockers in the unIDed stash.

 

They are 77 1/2" long and about 1 1/4" wide. Both ends curve down the same. I can try to get a picture later if that would help. Thanks for your time. Mark.

Just added pictures front and back.

 

Pat, see if these pictures help. 77 1/2" long by 1 1/4" wide. Mark.

 

No luck Mark. I thought I had one but it’s closer to 2” wide.

 

That's ok Pat. Thanks for taking the time to look. I will keep searching. Have a good weekend, Mark.

 

OK Pat, I'm picking up yet another project, so now I'm looking for any or all mid body chrome and script/logos for a '65 Starfire. I have some of it but in so so shape, and would love NOS....no rush.

 

Hi Pat, would you happen to have these 2 die-cast moldings for a 1968 Ninety Eight? 7795208 (right 1/4-rear) and 230448 (right fender skirt.) I attached a pic to show what they look like. Thanks, Dave

 

Dave, nothing came up in the nos list but i might have it used? Should i look for it used or not bother? Thanks

 

Joe, nothing stands out for nos on the Starfire. If you come down you can scout in the used section and there could be some stuff there.

 

Thanks for checking... I have decent used pieces, really looking for NOS. Thanks again! Dave

 

Pat, I was thinking the same thing. I hopefully can come down in early October if that's possible. Thanks so much for checking.

 

That first weekend I will be here then headed to Hershey. Actually that first Saturday is really good if you have the time as it’s the fall festival only a couple blocks down with street vending odds and ends. That Friday night is a small car show and usually a band on the square. Saturday is the parade from 10 to 12ish. Not sure but I will most likely put a car in it and open the museum right after.

 

I'm definitely gonna shoot for that! I'm marking my calendar for the 5th of October! I'll PM you when it gets closer to make sure I have the right address and its still good for you!

 

New to the site and not sure if I am doing this correctly. A Charley Jones alerted methat you may have what I am looking for. Please refer to my post yesterday evening, under the screenname Jetstar88Conv. for details and part numbers of what I am looking for, Until I get used to navigating this site, might we communicate by personal Email, If so, yy Email is win4today@gmail.com

Where are you located? Also, I can give you my phone number also ,via a subsequent communication, if my post is unclear and it would facilitate matters. Please bear with me....................................

Thank you,

Dennis
win4today@gmail.com

 

Need door flipper moldings for a 1953 88. brengirl@aol.com. Thank you.

 

Hi, looking for lower trim piece on the door behind the lock for a 1963 Oldsmobile Starfire. I thing the part #3822S2-3
Thanks!

 

Pat, any chance you have 12.182 pn 384839? A nice used one works too. 64 SF tail panel.

 

I'm looking for rocker moldings for a '62 cutlass. Both sides.

 

Looks like you need # 583668 & 583669 ;

 

Yes. Thanks for looking up the numbers. 583668 and 583669 are what I need.

 

Didnt find nos but might be able to locate used.

 

No luck on those and I don’t have a parts car, sorry.

 

Glen, I show one nos in inventory at $650. Not sure how nice it is but can dig it out if you want photos. There is one on the rear of a parts car I have but it needs some work. It would be much cheaper but unless you know how to work that aluminum, I’m guessing you wouldn’t want it. Let me know.

 

Howdy sir,
Looking for the trim along the bottom edge of trunk for a 68 Olds 442/Cutlass/F85. Below is my classified want ad link here.

https://classicoldsmobile.com/forums...olding-160011/

​​​​TX
Steve

 

Do you have any NOS 1966 Starfire wide side mouldings? Looking for door, front of rear wheel and rear of rear wheel each side.

I can get you part numbers and photos if that will help your search. Just let me know what additional info you need.

-Stew

 

Part numbers will narrow the search. Pretty sure I don’t have anything used but pics would help on that front. Email me at dead@mchsi.com

 

I will also email it to you.

66 Starfire door moldings: RH:4227246 LH: 4227247
66 Starfire rear fender moldings front of wheel opening: RH:4227065 LH: 4227066
66 Starfire rear fender moldings rear of wheel opening: RH: 4227131 LH: 4227132

I don't need anything used. As my used ones are drivers quality.

 

Hello,

I'm looking for the following part numbers for 63-3147:

Group / Part#

• 8.147 / 381742, 382127
• 8.147 / 381745-4, 381744-5, 382129-8, 382128-9
• 8.147 / 587479
• 12.112 / 382204-5, 382206-7
• 12.112 / 4877817
• 12.116 / 382220, 382221
• 12.116 / 4877434-5
• 12.116 / 382226-7
• 12.116 / 382232

I would also consider any other trim you have for the 63-3147

Please contact me through the forum or at ggarciaadinfinitum@gmail.com or 3zero3)5nine6-zero543,
Best

 

Hello, I have a 1965 Dynamic 88 convertible and I am looking for both sides door trim and rear dog legs that come off of the real wheel well between the door and front of the wheel well. Thanks

 

Got the part numbers?

 

Not sure if you still need these rocker mouldings but I got a bunch of trim and have both sides NOS in inventory. Message me direct to 618-554-4362 and let me know. Regards Pat

 

I show 389579 in inventory, not the other. Message directly to 618-554-4362 and I will get photos. Regards Pat

 

NOS side trim at $110. Let me know.