I need to refer to the parts manual myself, but I'd like to know exactly what you have for a '64 Starfire....

 

Just wondering if you might have a pair of '42~'47 60 series sedan rear 1/4 belt moulds. p/n 4125975 and 4125976.
thanks

 

So far nothing in the inventoried parts. Any chance you have a photo and dimensions of one of those belt moldings to cross reference?

 

Got the flu - will check part numbers and get back to you this weekend

 

Look up a couple posts above. Those are what I’ve found so far for your 52/3.

 

Do you by chance have anything for a 1960 dynamic 88 2dr HT?

Best
Niclas

 

I can look but its easier if you have part numbers of what you need for the 60.

 

Here are the numbers for moldings

1960 Oldsmobile Dynamic 88 2dr HT

Rear Quarter RH 4781360
Front Fender RH 577478

Can you please check if you have?

Niclas

 

Niclas, I have the 4781360 molding at $50. The fender molding so far I don’t have but if you can send a photo of the other side, I may have it in the unknown group. I also have lenses nos for your car.

 

Hello,
Do you happen the have this rear quarter moulding for a 1960 Oldsmobile Dynamic 88 four door? I am not sure of the part numbers or how to find them.​​​​​​​

 

Thats great you have the 4781360 molding, hope you can find the RH fender molding also and combine shipping, Tail light lenses I already have NOS, thanks!

The lenght of fender molding is (150,5cm) 59 1⁄4in

Attached pictures of LH fender molding

 

What you have circled is actually two mouldings .. 4781362 (RH) or 4781363 (LH) for the front moulding . And 4781964 (RH) or 4781965 (LH) for the rear one .

 

Looking for the Holiday Trim or upper mouldings for a 65 f85 Holiday Coupe
12.116 389558 & 9, 12.112 389504 & 5, 8.147 389306 & 7.
thanks,

 

Thank you for those part numbers! That's perfect! Looks like I need 4781363 (LH), 4781965 (LH) for my drivers side rear quarter. Hopefully they're available.

 

Mudbog, so far no luck in inventory but I will keep u in mind if I can id the other parts

 

Olddog, no luck so far but I will be bringing the unidentified nos trim to homecoming in June in case guys can ID them there.

 

Niclas, I think what I found is the driver fender side but it’s hard to compare w ur photos. The length is right and shape but I found 3 and the slight crease are all the same. Here is a pic of the rear fender end. Is this for sure the lh side?

 

Better pictures, hope its helpful.
Pictures are from LH front fender

 

Here is a picture of the 4781360 moulding. RH rear quarter. Curved long moulding (the front one of 2parts)

 

Looks like I have the left side, sorry.

 

And what about the RH front fender moulding?

// Niclas

 

1949 olds 98 sedanette fastback, 2 door need the rear 1/4 trim rt and lft.

556412 for the right
556413 for the left. I think this is cast aluminum trim with 10 studs on it, and might say futuramic on it. doesn't need to be the best as im not restoring the car,thank you

 

Niclas, the left hand front fenders is what I found. Still show the right rear in inventory.

 

So you have the RH front fender moulding for me?

Niclas

 

Want to buy Allan 386 453 1602

 

No, I have the 4781360 piece only.

 

Oldolds88, no luck. The ones I found I believe are for 4 dr sedan.

 

Yes, and 4781360 is the RH rear quarter, long curved moulding. I would like to buy it ($50) and what is the cost for shipping to Linden, NJ?

Actually, I can also buy the the LH front fender moulding and keep it as a spare.

Can you send me pictures of the items?

Niclas

 

Yes I can get photos Friday after work. Let me know the zip code to get a quote.

 

Al1950, no luck on that piece.

 

Any leads whereto search??, I will be at Pomona swap meet next month

 

The Olds homecoming in June might have it or the Nationals in Witchita might have a vender.

 

thanks for your time.

 

Linden NJ, 07036

 

Not sure what an 8 inch inside diameter pvc pipe will cost but due to the curve of the trim, it will need to be that wide to fit inside. Guesstimate usps has it at $40 plus the pipe cost. $50 for the rear 1/4 trim and $50 for the left front fender. If you definitely want them, I will go and buy the pipe and get a true total.

 

Yes, I accept

Niclas

 

I was able to squeeze the bent piece in a 6” pipe. Shipping post office says $40, $33 for the pipe, and $100 for the trim. Postal mo ships fast or check works fine with a 10 day hold. My address is 7825 Laurel Ln Robinson, IL 62454. Regards Pat McMillan

 

Can I pay by PayPal?

 

I suppose as long as they don’t remove a %, sure. If they take a cut add whatever that is to the total. My email is dead@mchsi.com.

 

I changed my mind, I only take the long curved mldg $50 trim + $33 pipe +$40 shipping

Can you send me a receipt after payment?, need it for custom and tax