When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Niclas, I have the 4781360 molding at $50. The fender molding so far I don’t have but if you can send a photo of the other side, I may have it in the unknown group. I also have lenses nos for your car.
Hello,
Do you happen the have this rear quarter moulding for a 1960 Oldsmobile Dynamic 88 four door? I am not sure of the part numbers or how to find them.
Niclas, I have the 4781360 molding at $50. The fender molding so far I don’t have but if you can send a photo of the other side, I may have it in the unknown group. I also have lenses nos for your car.
Thats great you have the 4781360 molding, hope you can find the RH fender molding also and combine shipping, Tail light lenses I already have NOS, thanks!
The lenght of fender molding is (150,5cm) 59 1⁄4in
Hello,
Do you happen the have this rear quarter moulding for a 1960 Oldsmobile Dynamic 88 four door? I am not sure of the part numbers or how to find them.
What you have circled is actually two mouldings .. 4781362 (RH) or 4781363 (LH) for the front moulding . And 4781964 (RH) or 4781965 (LH) for the rear one .
Last edited by Charlie Jones; April 28th, 2019 at 07:27 PM.
What you have circled is actually two mouldings .. 4781362 (RH) or 4781363 (LH) for the front moulding . And 4781964 (RH) or 4781965 (LH) for the rear one .
Thank you for those part numbers! That's perfect! Looks like I need 4781363 (LH), 4781965 (LH) for my drivers side rear quarter. Hopefully they're available.
Niclas, I think what I found is the driver fender side but it’s hard to compare w ur photos. The length is right and shape but I found 3 and the slight crease are all the same. Here is a pic of the rear fender end. Is this for sure the lh side?
1949 olds 98 sedanette fastback, 2 door need the rear 1/4 trim rt and lft.
556412 for the right
556413 for the left. I think this is cast aluminum trim with 10 studs on it, and might say futuramic on it. doesn't need to be the best as im not restoring the car,thank you
Last edited by oldolds88; May 5th, 2019 at 08:08 PM.
Reason: correction
Not sure what an 8 inch inside diameter pvc pipe will cost but due to the curve of the trim, it will need to be that wide to fit inside. Guesstimate usps has it at $40 plus the pipe cost. $50 for the rear 1/4 trim and $50 for the left front fender. If you definitely want them, I will go and buy the pipe and get a true total.
Not sure what an 8 inch inside diameter pvc pipe will cost but due to the curve of the trim, it will need to be that wide to fit inside. Guesstimate usps has it at $40 plus the pipe cost. $50 for the rear 1/4 trim and $50 for the left front fender. If you definitely want them, I will go and buy the pipe and get a true total.
I was able to squeeze the bent piece in a 6” pipe. Shipping post office says $40, $33 for the pipe, and $100 for the trim. Postal mo ships fast or check works fine with a 10 day hold. My address is 7825 Laurel Ln Robinson, IL 62454. Regards Pat McMillan