Oly442

need both rear quarters for 1965 cutlass let me know

2blu442

Hi Oly
I have one drivers side which is complete except for the sail panel area, dark blue in color. It doesn't have the typical cancer type rust but it does have dents. Then I've got the rear portions from a 4 door car that are faded white. The wheel well lip and behind the wheel well are the same as the 2 door. The smaller the pieces you need the cheaper the shipping. I haven't taken pictures of the 4 door portions since I cut them off the parts car. But here's some photos to check out. John

P1010107-1.jpg

P1010108-1.jpg

P1010008-1.jpg

P1010006.jpg

P1010007-1.jpg

P1010102.jpg

P1010100.jpg

oldstata

Wow John I thought you sold that left blue one

I really need to make a trip out to you this march ! I could really use that in more ways than one ,my 65 was hit on that side at one time and the wheel well is damaged not to mention I am debating on a 64 post car purches that my son found that needs that same side lol

2blu442

I had a verbal commitment from a member last summer. He touched base with me a few times after that, but I've not heard from him in several months. So... if Oly can use the 4 door rear portions then you would be next in line for the blue quarter panel. John

oldstata

Yes John let me know how it works out I will most like looking at march before I could get out to you

507OLDS

Do you have a perfect passenger side 1/4 panel for a 70-72 "S"/442 hardtop?

2blu442

Sorry Brian, I don't. I had one but a couple years ago it went on another members car down in Texas.


John

ment2drive

Hi John, Any chance you have a clean 66 drivers side qtr panel. I have a convert but could use a hard top as well. I could also consider a pair of doors . Thank You, Chris

2blu442

Hi Chris
Here's another thread describing a set of quarter panels I removed from a 1967. The trim holes would have to be welded up, but otherwise they're the same quarter panels.

https://classicoldsmobile.com/forums...each-side.html

Yes, I believe I have a nice set of doors from a 1966 2 door hardtop. They should be the same ones used on the convertible. What part of the country are you in? It would likely be the weekend before I can get pictures of the doors for you.

John

ment2drive

Thanks John for the quick reply. I forwarded the pics to my metal guy. We are soda blasting the car this coming week so we'll know more about the doors then, but the qtr is definitely in trouble. Please send the door pics when you get a chance but don't make a special venture yet. You wouldn't be heading to south Florida for a vacation per chance? Thanks Again, Chris

Oly442

How much do you want for both white quarters, just mid way back the opening ,there inches up from bottom of lip,and back to the bumper wells(insets the bumper covers).can u price parts and shipping separately please.thanks oly

2blu442

Oly, I just replied to your email. Let me know if you didn't get it.

John

Oly442

Got it and I want them both .how do u want payment.

2blu442

Hi Oly
Paypal protects us both, so I'd suggest that. But if you don't have paypal a money order would be fine. Please reply to the email and we can discuss the shipping method. John

Bfg

Looking for R code 65 14x6 wheel. Greg in illinios

2blu442

Hello
Are these 5 on 4 3/4 bolt patterns? What did they come on?

John

9618peter

looking for doors for 67cutlass 2 door hard top $$ can you get a price with shipping to Ontario Canada thanks

2blu442

I've got some nice doors, but unless your close enough to drive over the border to pick them up I think it will be spendy. Have you checked with the other guys in the frozen North? I know Sammy was parting out a 1967 a while back.


John

drop top olds

Hello John,

What about the Chevy truck in the 65 4 door picture. Are keeping it whole? I am looking for a few small parts for my truck.

Please let me know if you are willing to sell some parts off it.

Thanks

2blu442

Hi Steve
The 1959 Chevy pickup was my foster brothers back in high school. We drove the wheels off it in the early 1970's. Someday... after the Oldsmobiles are done... I hope to restore it. But there's still a lot of these kinds of rigs around in my part of the country. Watch the Medford Oregon Craigslist and if there's something close by that you need I'll check it out for you. Or if you just need a few things send me a list and I'll watch at the swap meets I attend. We've got a pretty big one coming next month up in Albany Oregon, a few hours away but one of the larger ones in the state and I plan to attend. John

OCD4life

69 toronado parts? Pm me please

dwiener

Do you still have the 65 left fender and a Rt fender eyebrow molding? If so how much any clue on shipping to MN?

also looking for rear interior trim panels for 65 holiday.

2blu442

Sorry, I missed your post. Yes I have some 1965 fenders if your still looking I'll snap some photos for you. Not sure about the eyebrow molding. I may have the interior panels, but will need to be sure I'm thinking of the same panels you are.

John

oldstata

If your looking for 65 eyebrows fusick sells them new repop ones. I bought about five before getting good drivers set just know what your looking for

Not that John would sell bad parts. Thought I would throw this out there just incase he doesn't have them

2blu442

I've got two drivers side 1965 fenders. But they're both off the F85 model so they don't have the trim hole for the Cutlass side trim. Here's a couple pictures and a link to see a whole bunch more. Greyhound may be the most cost effective shipping method. Would you be able to pick up a package this size at your local bus station? I've shipped several fenders through Greyhound and they tend to run $80-100 anywhere in the US. John

P5180490.jpg

P5180468.jpg

For more views of these two fenders go to:
http://s90.photobucket.com/user/2blu...?sort=3&page=1

John

dwiener

they both look pretty decent, what is your price on them?

2blu442

I would take $250 for either one. If your interested send me a PM or email with your shipping address and I'll get the shipping costs for you to consider as well. John

jasonrpeck

do you have the lower (below the trim behind the tire) pas. quarter for a 66 dynamic

2blu442

Sorry Jason, I don't. If you haven't created a parts wanted thread yet I'd encourage you to give that a try.

John

schlitzguzzler1

I am looking for 1964/65 f85 rear quarter and inner fender for 2 or 4 door and the right lower behind the rear wheel. I have been looking in my area (Sioux Falls SD) for rust free stuff but it is not panning out real well.
Thanks

2blu442

I do have a 1964 parts car with dented but I think solid quarter panels. If your still looking send me a reminder on Saturday and I'll get some photos for you.

John

Roger60

You seem to be the parts guy here, not to waste your time, but what would one expect to pay for a complete front clip for a 67 442 in good condition, mostly rust free with usable chrome? Thanks for your time.

servexcell

Looking for decklid and right front fender rust free for 71/72 442 . Do you also have doors.

thanks Bruce

Drbigblock

Sent pm

2blu442

Bruce, At this time I don't have a deck lid and likely don't have a rust free fender. I do have some doors though, what part of the country are you in?

PM's sent to Roger60 and Drbigblock

Racing Palm Tree

Looking for good fenders (L & R) for a 67 Cutlass

442fanatic

Would you sell the bumper impact strips seperate off of the 77 cutlass front and rear bumpers? Are they in good shape?

2blu442

Hi guys
I work in Forestry and we're having bad forest fires right now. Between work and family obligations I don't have time to play with the car stuff. So if you haven't found what you need send me a reminder in a week. If I don't reply to that wait a week and try again. Fall rains should be coming soon... we hope!

John

servexcell

I would need a drivers door 70-72 rust free

Bruce thanks

SnakeBit

driver side front fender, 67 holiday cutlass 4 door?