Removing paint overspray from interior

Thread Tools
 
Search this Thread
 
Old April 1st, 2010, 03:05 PM
  #1  
Registered User
Thread Starter
 
msco123's Avatar
 
Join Date: Jul 2009
Location: Louisiana
Posts: 105
Removing paint overspray from interior

Ok, I know you get what you pay for. I thought I was getting a bargain paint job and what a piece of crap. I now have paint overspray on dash, seat, basically whole interior. How do I clean this off?
msco123 is offline  
Old April 1st, 2010, 03:18 PM
  #2  
Land Yacht Captain
 
66ninetyeightls's Avatar
 
Join Date: Aug 2009
Location: Shelburne, Ontario
Posts: 1,727
You could try some Acrysol or paint thinner. Try them on spots that are not visible first to make sure they don't affect the factory finish first.
66ninetyeightls is offline  
Old April 1st, 2010, 04:45 PM
  #3  
Registered User
 
MJAKS462's Avatar
 
Join Date: May 2008
Location: Minnesota
Posts: 356
Carb cleaner works great to take anything off , but I would hate to see you ruin your interior using it. I would try a real small spot and let it dry and see how it looks.I use it on wires to clean off paint and grease .
MJAKS462 is offline  
Old April 1st, 2010, 06:27 PM
  #4  
Registered User
Thread Starter
 
msco123's Avatar
 
Join Date: Jul 2009
Location: Louisiana
Posts: 105
Yeah, I sure as hell would hate having a screwed up interior.
msco123 is offline  
Old April 1st, 2010, 07:18 PM
  #5  
Oldsdruid
 
rocketraider's Avatar
 
Join Date: Dec 2007
Location: Southside Vajenya
Posts: 10,284
There is no excuse for getting overspray inside the car. Any painter worth a hoot should know how to tape off and mask a door or window opening to prevent it.

I'd have it professionally cleaned, and then I'd send the painter the bill with a letter from your lawyer.
rocketraider is offline  
Old April 1st, 2010, 07:30 PM
  #6  
Registered User
Thread Starter
 
msco123's Avatar
 
Join Date: Jul 2009
Location: Louisiana
Posts: 105
Originally Posted by rocketraider
There is no excuse for getting overspray inside the car. Any painter worth a hoot should know how to tape off and mask a door or window opening to prevent it.

I'd have it professionally cleaned, and then I'd send the painter the bill with a letter from your lawyer.
I don't have any recourse since the car was painted at a prison body shop by a convicted murderer (no kidding). The guy was supposed to be a Ford certified body man. Goes to show you just can't trust criminals. This is a true story.
msco123 is offline  
Old April 1st, 2010, 07:54 PM
  #7  
Registered User
 
70 cutlass s's Avatar
 
Join Date: Sep 2009
Location: KY
Posts: 1,489
Originally Posted by msco123
I don't have any recourse since the car was painted at a prison body shop by a convicted murderer (no kidding). The guy was supposed to be a Ford certified body man. Goes to show you just can't trust criminals. This is a true story.
Since that's the story then your screwed. Try mineral spirits. Take some and put it on a rag then clean the over spray.
70 cutlass s is offline  
Old April 1st, 2010, 08:46 PM
  #8  
Land Yacht Captain
 
66ninetyeightls's Avatar
 
Join Date: Aug 2009
Location: Shelburne, Ontario
Posts: 1,727
Pay another inmate to shank him for ruining your ride!!!
66ninetyeightls is offline  
Old April 1st, 2010, 08:52 PM
  #9  
Registered User
 
chequenman's Avatar
 
Join Date: May 2009
Location: north of Toronto and quite a bit West!!!
Posts: 514
Exclamation

Originally Posted by 66ninetyeightls
Pay another inmate to shank him for ruining your ride!!!

Kinda tacky Craig, but right to the Point.
chequenman is offline  
Old April 1st, 2010, 08:52 PM
  #10  
Registered User
 
Limey's Avatar
 
Join Date: Jan 2010
Location: Pecatonica,Illinois
Posts: 467
Originally Posted by 70 cutlass s
Since that's the story then your screwed. Try mineral spirits. Take some and put it on a rag then clean the over spray.

Goof Off, not kidding let it soak in for a little bit and use 0000 grit steel wool so not to scratch the vinyl SOFTLY ( softly is the key word here )


Last edited by Limey; April 1st, 2010 at 08:56 PM.
Limey is offline  
Old April 1st, 2010, 08:58 PM
  #11  
Registered User
 
chequenman's Avatar
 
Join Date: May 2009
Location: north of Toronto and quite a bit West!!!
Posts: 514
Originally Posted by Limey
Goof Off, not kidding let it soak in for a little bit and use 1500 grit steel wool so not to scratch the vinyl SOFTLY ( softly is the key word here )



Goof Off is for removing Latex Paints not Automotive Base/Clear or Single Stage urethanes. Goof Off won't touch automotive finishes, unless you are scrapping it off with a Razor Blade.
chequenman is offline  
Old April 1st, 2010, 09:00 PM
  #12  
Registered User
 
Limey's Avatar
 
Join Date: Jan 2010
Location: Pecatonica,Illinois
Posts: 467
well it worked fine for my fiance's car that the painter didnt mask all the crap off as well
Limey is offline  
Old April 2nd, 2010, 04:26 AM
  #13  
Registered User
 
MN71W30's Avatar
 
Join Date: Dec 2008
Location: Somerset Wisconsin
Posts: 1,167
Wax and gease remover/Naptha/DX330/ lighter fluid, it's pretty much the same stuff. Get a gallon and a rag and get scrubbing. Try a spot to make sure their isn't a problem.
MN71W30 is offline  
Old April 2nd, 2010, 06:54 AM
  #14  
Registered User
 
442scotty's Avatar
 
Join Date: May 2008
Location: Calgary Alberta
Posts: 641
Go to a body shop supply store and get a product that removes overspray...I use one that comes in a container with pull out wet wipes...its made for doing this...I dont have the name right now cause its packed away but it works well on vinyl, glass etc and took my acrylic urethane off pretty quick......Even with all of my windows well taped some overspray managed to get in somehow. I will try and find it and print the brand...
442scotty is offline  
Old April 2nd, 2010, 07:06 AM
  #15  
Registered User
Thread Starter
 
msco123's Avatar
 
Join Date: Jul 2009
Location: Louisiana
Posts: 105
Originally Posted by 442scotty
Go to a body shop supply store and get a product that removes overspray...I use one that comes in a container with pull out wet wipes...its made for doing this...I dont have the name right now cause its packed away but it works well on vinyl, glass etc and took my acrylic urethane off pretty quick......Even with all of my windows well taped some overspray managed to get in somehow. I will try and find it and print the brand...
Thanks, I appreciate any help.
msco123 is offline  
Old April 2nd, 2010, 09:09 PM
  #16  
Registered Luser
 
ent72olds's Avatar
 
Join Date: Aug 2006
Location: LI,NY
Posts: 3,783
Go to the autobody supply and get the clay bar and the proper spray. Like everybody else said, try it on a hidden spot first.....
ent72olds is offline  
Old December 22nd, 2011, 10:00 PM
  #17  
Kiwi Ciera Driver
 
scumdog's Avatar
 
Join Date: Oct 2011
Location: New Zealand
Posts: 37
Haven't read all the replies BUT:

If it on vynil upholstery etc use brake fluid.

Wipe it onto the areas you want to take the overspray off and leave overnight.

Wipe down with a damp rag & rinse carefully..

May take two attempts.

WARNING: Brake fluid is not fussy what paint it removes - do NOT put it onto a surface already painted to take the overspray off for instance.

It is ideal for vynil, plastic/rubber glass etc.
scumdog is offline  
Old December 23rd, 2011, 06:25 AM
  #18  
Connoisseur d'Junque
 
MDchanic's Avatar
 
Join Date: Sep 2010
Location: The Hudson Valley
Posts: 21,183
Originally Posted by msco123
... the car was painted at a prison body shop by a convicted murderer (no kidding).
The guy was supposed to be a Ford certified body man.

Goes to show you just can't trust criminals.
I know this is a zombie thread, but...

Goes to show you can't trust Factory-Certified mechanics!

- Eric
MDchanic is offline  
Old December 23rd, 2011, 06:53 AM
  #19  
Registered User
 
Lady72nRob71's Avatar
 
Join Date: Feb 2008
Location: Plano, TX
Posts: 11,798
Oven cleaner works great for removing overspray from plastic. The smell & fumes are horrible though.
Lady72nRob71 is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
NTMD8TR
Paint
4
September 17th, 2014 09:45 PM
guycaso
General Questions
1
February 1st, 2011 12:27 PM
jensenracing77
Paint
4
July 13th, 2010 06:58 PM
oldzy
General Discussion
36
November 20th, 2009 05:38 AM
68Tom
Paint
0
March 6th, 2009 07:30 AM



Quick Reply: Removing paint overspray from interior



All times are GMT -7. The time now is 09:33 AM.