Other Oldsmobiles Anything not listed above, such as F-85 (1961-1963), Firenza (1982-1988), Starfire (1961-66 and 1975-80), Omega, etc.

65 425 air conditioning info needed

Thread Tools
 
Search this Thread
 
Old Aug 25, 2014 | 08:01 AM
  #1  
Jetstarjim's Avatar
Thread Starter
Registered User
 
Joined: Aug 2014
Posts: 171
From: S Dayton Ohio
65 425 air conditioning info needed

Good morning. On the Jetstar1 I had acquired has been a little bit of a puzzle. While it is basically complete, the PO had disassembled part of the air conditioning, and put it in a box. I've been able to use reference clues to determine I have the necessary compressor brackets, hoses, etc. The difficulty I'm having is the receiver/drier bracket mounted on the RT front, near the core support. I've made a pretty good effort to look for images before asking, but am a little stumped. An image of the RT front core support/ fender area would be very helpful. I'm trying to determine the way it is mounted in that area. I have a box full of brackets the PO had, but nothing appears to look right for that area, and may not even go to this car. Thanks.
Old Aug 25, 2014 | 08:38 PM
  #2  
bigoldscruiser's Avatar
2 '66 98's
 
Joined: Aug 2008
Posts: 489
From: central New Jersey
I'm not positive but I think it would be the same as on my '66 full size. I'll take a snap tomorrow and send it off. It can't hurt!

Bruce
Old Aug 27, 2014 | 01:30 PM
  #3  
Jetstarjim's Avatar
Thread Starter
Registered User
 
Joined: Aug 2014
Posts: 171
From: S Dayton Ohio
Thanks, that would be greatly appreciated. I've found some pics on the net, but they don't show the right front corner of the engine compartment, as they usually focus on the engine.
Old Aug 27, 2014 | 01:48 PM
  #4  
bigoldscruiser's Avatar
2 '66 98's
 
Joined: Aug 2008
Posts: 489
From: central New Jersey
'66 A/C receiver/drier

I'm not sure these will come through.
Attached Images
File Type: jpg
IMG_0083.jpg (61.6 KB, 26 views)
File Type: jpg
IMG_0082.jpg (46.3 KB, 23 views)
Old Aug 27, 2014 | 02:04 PM
  #5  
Jetstarjim's Avatar
Thread Starter
Registered User
 
Joined: Aug 2014
Posts: 171
From: S Dayton Ohio
Thanks, the bracket that attaches to the fender liner is the one I was trying to get an image of, and believe I may be missing. The holes in the fender liner on mine run left to right, rather than front to back, but I'm thinking the bracket itself is probably the same. Thanks for the help!
Old Sep 6, 2014 | 03:05 PM
  #6  
justintiime's Avatar
mmmm, starfires
 
Joined: Oct 2011
Posts: 174
From: Roanoke, VA
Do you still need pictures? I can take some if needed.
Old Sep 7, 2014 | 07:13 AM
  #7  
Jetstarjim's Avatar
Thread Starter
Registered User
 
Joined: Aug 2014
Posts: 171
From: S Dayton Ohio
Originally Posted by justintiime
Do you still need pictures? I can take some if needed.

Thanks. In the pic above of the 66' the setup differs a little bit from mine. If you have a 65', I'm just wondering if the bracket that mounts the drier to the fender liner is the same, only in a different position. Any help is greatly appreciated.
Old Sep 7, 2014 | 08:13 AM
  #8  
justintiime's Avatar
mmmm, starfires
 
Joined: Oct 2011
Posts: 174
From: Roanoke, VA
You had perfect timing! I was at my storage unit putting away my firebird when I got your notification. Kinda hard to get good pics, but I hope you can find what you need here:

http://s60.photobucket.com/user/Race...?sort=3&page=1
Old Sep 7, 2014 | 08:19 AM
  #9  
Jetstarjim's Avatar
Thread Starter
Registered User
 
Joined: Aug 2014
Posts: 171
From: S Dayton Ohio
Excellent! Thank-you very much. I think there is more not in the "box-o-crap" than I thought, lol!
Old Sep 7, 2014 | 04:23 PM
  #10  
justintiime's Avatar
mmmm, starfires
 
Joined: Oct 2011
Posts: 174
From: Roanoke, VA
were those pics adequate?
Old Sep 8, 2014 | 09:19 AM
  #11  
Jetstarjim's Avatar
Thread Starter
Registered User
 
Joined: Aug 2014
Posts: 171
From: S Dayton Ohio
Originally Posted by justintiime
were those pics adequate?
Yes, they were a great help, thanks again. I am currently freshening up the interior in my Jetstar 1, and also enjoyed seeing the interior pic's of your blue Starfire. Very sharp interior in that car. There sure was a difference in the upgrade between the two models. I think they used leftover Belair trim on the Jetstar 1, lol!
Old Sep 10, 2014 | 04:39 AM
  #12  
justintiime's Avatar
mmmm, starfires
 
Joined: Oct 2011
Posts: 174
From: Roanoke, VA
honestly, I really liked the red jetstar1 that was parked next to me at the nationals. 4 speed to boot!
Old Sep 10, 2014 | 08:25 PM
  #13  
bigoldscruiser's Avatar
2 '66 98's
 
Joined: Aug 2008
Posts: 489
From: central New Jersey
justintiime - which car was yours? My red '66 98 convert was parked back-to-back with the Jetstar1.
Old Sep 10, 2014 | 08:28 PM
  #14  
justintiime's Avatar
mmmm, starfires
 
Joined: Oct 2011
Posts: 174
From: Roanoke, VA
we talked a bit that weekend. My father and I were there in the red 65 starfire convertible
Old Sep 11, 2014 | 05:59 PM
  #15  
bigoldscruiser's Avatar
2 '66 98's
 
Joined: Aug 2008
Posts: 489
From: central New Jersey
Yes, I remember. Did you get that turn signal cam from eBay that we were discussing? I double checked - it is the right one.
Old Sep 11, 2014 | 06:02 PM
  #16  
justintiime's Avatar
mmmm, starfires
 
Joined: Oct 2011
Posts: 174
From: Roanoke, VA
I bought FOUR of them!
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
rand5204
General Discussion
19
Apr 10, 2012 06:37 AM
sx455raidercelticfan
General Discussion
4
Aug 1, 2010 08:03 PM
68Tom
Parts Wanted
4
Apr 8, 2009 10:48 AM
RPD1659
Parts For Sale
0
May 21, 2008 07:03 PM
vomer
Intrigue
3
Apr 29, 2008 04:14 PM




All times are GMT -7. The time now is 12:25 AM.