george landis
#1
george landis
Fairly nice 1967 oldsmobile 442. Gold/black interior. 400/400 switch pitch. ps, pwr disc brakes, a/c tic/toc/tac. Numbers seem to match. Intake wrong(455 w/egr blanked off) 3.08:1 limited slip. cowl tag: 03D. ST 67-33817 BF05520 BODY, TR 970 GG PNT. B80? H92071? 1B0160?. Door tag 33817 7Z113190. This is my fifth 442. Had the other four some years ago. Dad was a diehard olds man. Retired US Navy, 30 years. Now 64. Grandson(19) and I are working together. Car is running and 70% there. Eng great. Trans kickdown and switch pitch need help. Suspension needs new bushings, interior needs up grading. Body great, floor pans great, trunk great, rear glass pillars great. Will update with new tires and wheels. Sandin A/C compressor, newer carb(probably Holley), petronix, window seals, etc. Read a few threads but not sure how to post. Just learning. Have a few questions. Especially about a odd broadcast sheet I found in the car and transmission setup. Hopefully , I can get the grandson to post pictures of our car later. Thanks.
Sincerely,
George Landis
Sincerely,
George Landis
#2
Welcome! Sounds like a nice '67. Car was built in Fremont. Bad news is that there are not accessory codes on the body tag that will do you any good. The B80 is roof rail trim. The other numbers you question are Fremont series numbers that have no meaningful decode. The good news is that Fremont cars may have build sheets. Would like to see the "broadcast sheet" you refer to, it is probably what I'm calling the "build sheet". That is gold for documentation. You can always e-mail it to me at wmachine@shubes.net
Thread
Thread Starter
Forum
Replies
Last Post
sx455raidercelticfan
General Discussion
4
November 15th, 2010 11:10 AM