Bought a nice 4 Spoke wheel from another member and was planning on installing this evening. I removed the aftermarket Grant Steering wheel and billet trim ring but I can not get this damn thing off (image attached). I haven't gone all caveman on it yet...am I missing something? It seems like it should just unscrew?

 

You need a steering wheel puller to get that off. Local autoparts store should rent you one, or they are cheap enough, just buy one.

 

If going "caveman" involves a club, do not use it. It can damage the collapsing feature of the column.
Rent or buy a puller or make your own with a plate of steel and some old long bolts that will thread into the holes and one in the center with a few nuts on it.

 

Pullers are cheap.

You should have one.

Go out and spend the $15.

Live a little!



- Eric

 

Harbor Freight should have one that will do what you need.

 

After you get that off....and I hope this comes across right, you do have the hub assembly and horn wire for the 4 spoke wheel?? Without the hub you can't mount the N34 wheel.