1986 z28 parts for 1967 a body or 1983 g body?
#2
The anti sway bar you need for the 67 is 2nd gen F-body.
#3
The front sway bar would work for the '83, though it may not be any bigger than the F41 G-body bar. Could be a 34mm or 36mm hollow bar vs the 32mm solid on the G-body.
The front brakes aren't an interchange, the rears could have the 3 or 4 bolt flange, I can't remember all the details. Even then, the old school PBR calipers with external parking brake mechanism will hit the frame on a G-body unless you clock them downwards.
The front brakes aren't an interchange, the rears could have the 3 or 4 bolt flange, I can't remember all the details. Even then, the old school PBR calipers with external parking brake mechanism will hit the frame on a G-body unless you clock them downwards.
Thread
Thread Starter
Forum
Replies
Last Post