I am scouring the internet for both male and female electrical connectors for a 67, 442 Junction Block to Starter Cable. I ordered the cable shown below but the connector plug is missing on harness side. The plug was removed, and wires are spliced into the harness. Ideally i could correct this with the right plug for the harness side. I think the connectors would be the same as what i need for the detent connections on my Switch pitch TH400 which is missing as well. If anyone knows a part number i would be forever grateful! I am going through 17k + pictures on the mouser.com site but thought i would reach out in case someone has been down this road already. I snagged a couple pics from another thread on this site for reference as well. Thanks in advance.


. Thanks in advance for any help.

 

I found a pic of the switch pitch connector and it is not the same. If someone knows a part number for this as well that would be great as well. Thanks.

 

I think this will do for the switch pitch connector. Will let you know the fit when i get it.
American Autowire 500176 American Autowire Wiring Pigtails | Summit Racing

 

Going to try the following for the starter connection.
Ron Francis Wiring QCK2 Ron Francis Wiring Quick Connectors | Summit Racing

 

Here ya go....
https://kwikwire.com/products/2-posi...ries-connector

Those connectors are used a bunch in the car.

 

Much appreciated sir!

 

Anytime 👍

 

Correction on the switch pitch connector. Found this per Joe Padavano in another thread. The harness from the switch to the trans is available new.