Thermal Switch
Thread Starter
Registered User
Joined: Aug 2006
Posts: 3,145
From: Far Northeast Philadelphia, PA
Thermal Switch
1985 Delta 88
Thermal switches. There is 2 in the manifold and they each have 2 vacuum lines comming out of them.
What do they do? I forget. I was looking to remove the rear one to put in a water temp sender and the front one to put in a fan switch for an electric fan
Thermal switches. There is 2 in the manifold and they each have 2 vacuum lines comming out of them.
What do they do? I forget. I was looking to remove the rear one to put in a water temp sender and the front one to put in a fan switch for an electric fan
Registered User
Joined: Feb 2008
Posts: 11,798
From: Plano, TX
Emission - one is for charcoal can purge, one for EFE (early fuel evaporation) - the valve at the exhaust manifold that directs exhaust through the intake to heat it up. If you remove the these, make sure the controlled device is disabled. In other words, you need to figure out if vacuum opens or closes the valves.
These diags may help you...
http://members.dandy.net/~k0xp/Oldsm...dsDiagrams.htm
These diags may help you...
http://members.dandy.net/~k0xp/Oldsm...dsDiagrams.htm
Thread
Thread Starter
Forum
Replies
Last Post
Dead Reckon
Electrical
0
Mar 25, 2014 01:02 PM
