NEED PARTS FOR 1970 DELTA 88 and info
#1
NEED PARTS FOR 1970 DELTA 88 and info
Hopefully someone has the following parts for me.
Rear bumper,
3 sets of goldish-green coloured rear seat belts.
Rights side of instrument cluster(i think its a blank piece that I need instead of the clock. and air vent thats right beside the cluster
How do I tighten up the right side of my dash, it appears to be a little loose.
thanks.
bob
Rear bumper,
3 sets of goldish-green coloured rear seat belts.
Rights side of instrument cluster(i think its a blank piece that I need instead of the clock. and air vent thats right beside the cluster
How do I tighten up the right side of my dash, it appears to be a little loose.
thanks.
bob
#2
I bought aftermarket seat belts for my 71 98 from Auto Loc. They have decent customer service and good prices. I suggest buying a Factory Service Manual so you can look at diagrams and schematics to do tasks like tightening up the dash. Unfortunately, there is no easy way for someone to tell you to tighten the 3/8" bolt under the dash with the widget attached to it to make your dash stop squeaking. It is just a case of knowing how to do it and having the diagram available in a manual.
#5
belts
The actual buckle is colour matched to the belt and the gm lettering on the buckle is surrounded by a blue colour. Mine were stuff under the rear seat and have grown rust and one is not useable.
Is there an olds swap meet somewhere in the USA??????
bob
Is there an olds swap meet somewhere in the USA??????
bob
#9
Not sure what you are referring to but I am going to post some more pictures that are closer ups. You tell me what you need and they are yours for shipping....Or take the whole lot of them.
#10
Here are some more pictures of stuff. The electric trunk popper May not fit the Delta, I pulled it to use on the Cutlass and it didn't work. I just put it in the same box of stuff, but it works! Little pieces like dash trim, *****, head rest lock mechanisms for the split front bench seat, the brace that fits below the "tooth" on the hood, a few engine brackets to Lord knows what, an accelerator linkage bracket for a 2jet carburetor, other stuff I don't remember or don't remember what I posted. Let me know.
#11
chrome window trim
Dan, the long chrome pieces with rubber are for the rear windows of the 2 door correct?
I need a non pitted drivers side.
I'll take both if you have no use for them.
My upstate NY shipping address is 56 Pinkerton Road
Ogdensburg, NY, 13669.
Let me know how much to ship usps please.
ps, I figured out how to tighten the dash.
thanks
bob
I need a non pitted drivers side.
I'll take both if you have no use for them.
My upstate NY shipping address is 56 Pinkerton Road
Ogdensburg, NY, 13669.
Let me know how much to ship usps please.
ps, I figured out how to tighten the dash.
thanks
bob
#12
Yes they are for the rear windows, the rubber is cracked on one of them as you can see but they are better than nothing. I will take them to work on Monday and ship them UPS from work. No pitting to my knowledge. Going to get them now.
#15
Hi Dan thanks.
I just found another 70 2 door in Montreal. Its running and he wants $1500 Canandian. I need a front windshield too and they are 550.00 up here.
Alot of good parts. I'll offer him 1,000.
Let me know if anyone needs parts off it.
I'll mail you the money as soon as I talk to my friends in Ogdensburg.
Thanks and talk to you soon.
Bob
I just found another 70 2 door in Montreal. Its running and he wants $1500 Canandian. I need a front windshield too and they are 550.00 up here.
Alot of good parts. I'll offer him 1,000.
Let me know if anyone needs parts off it.
I'll mail you the money as soon as I talk to my friends in Ogdensburg.
Thanks and talk to you soon.
Bob
Thread
Thread Starter
Forum
Replies
Last Post
billmerbach
Parts Wanted
21
March 8th, 2014 09:19 AM
DTomastik
General Discussion
9
September 24th, 2012 09:12 PM
sx455raidercelticfan
General Discussion
4
August 1st, 2010 08:03 PM