T.A Performance Rear end Girdles..
T/A covers
T/A has the thickest cover of most all of the aftermarket girdle cover. Most other knock offs are 1/2 the thickness and really do not do what they are suppose to.
The girdle cover is to stop cap deflection of the carrier when the ring and pinion a slammed hard off the line. THE THICJKER THER BETTER on these covers ...
T/A is the thickest.
There are companies that USE T/A to build there covers and then put there name on it Nitro gear and axle being one of them. I sell these Nitro covers 149.00
They EXACT as t/a but say Nitro gear and axle instead of T/A.
Jim
JD
The girdle cover is to stop cap deflection of the carrier when the ring and pinion a slammed hard off the line. THE THICJKER THER BETTER on these covers ...
T/A is the thickest.
There are companies that USE T/A to build there covers and then put there name on it Nitro gear and axle being one of them. I sell these Nitro covers 149.00
They EXACT as t/a but say Nitro gear and axle instead of T/A.
Jim
JD
I've been running one on my 12 bolt Chebby axle for over 25 years now....never an axle problem....even with slicks, manual trans, and 4.11's.
Just took it apart 3 years ago to drop down to 3.73's to help fuel economy, with a tremec overdrive tranny....NO sign of bearing fatigue or cap deflection. For $160, cheap insurance, plus it has a plug to check oil level, and the aluminum helps keep it cool on those long trips as well.
Just took it apart 3 years ago to drop down to 3.73's to help fuel economy, with a tremec overdrive tranny....NO sign of bearing fatigue or cap deflection. For $160, cheap insurance, plus it has a plug to check oil level, and the aluminum helps keep it cool on those long trips as well.
me too
I have had one on the Chevy 12 bolt in my race car for 7 years. Never a drop of fluid leaking from the cover. The piece is worth the cost for the addded strength & looks. The thick casting is impressive.
Thread
Thread Starter
Forum
Replies
Last Post
Magna86
Parts For Sale
2
Jun 4, 2014 10:16 PM
MDchanic
Chassis/Body/Frame
31
Aug 12, 2012 04:24 AM
wmachine
General Discussion
11
Dec 30, 2009 05:55 AM



