70 Cutlass Supreme Spindle Question
#1
70 Cutlass Supreme Spindle Question
What do I need to do to my "drum" spindles to convert them to "disc" spindles on my 1970 Cutlass Supreme SX?
I know I have seen it somewhere on here, but for the life of me I can't remember where.
Thanks in advance.
I know I have seen it somewhere on here, but for the life of me I can't remember where.
Thanks in advance.
#2
http://www.pozziracing.com/brakes.ht...Drums_to_Discs
The first gen Camaros use the same spindles as the 64-72 A-bodies, so all the info in this website applies.
The first gen Camaros use the same spindles as the 64-72 A-bodies, so all the info in this website applies.
#3
I might have a complete set of disc brakes off of my 70 442 if the car doesn't sell by Sunday and I can get to use some shop space to remove them from the car next week. I'll keep everyone informed as to what happens.
#6
Randy, if you part it what shape if the dash board in?
I am looking for someone with a bad dash but an unmolested radio section. I want to try & improvise a fix for the din chassis cut out the previous owner did.
I am looking for someone with a bad dash but an unmolested radio section. I want to try & improvise a fix for the din chassis cut out the previous owner did.
#7
The dash is rough to say the least. The pad is shot, but the radio center has not been cut out for a stereo. It was modified for a later 2 **** radio due to the change in spacing though so I don't know that I would call it unmolested.
You can see it here:
IMG-20111012-00004.jpg
You can see it here:
IMG-20111012-00004.jpg
Thread
Thread Starter
Forum
Replies
Last Post
CrazedCountryRebel
Eighty-Eight
11
May 4th, 2011 09:54 AM
oldzy
Parts Wanted
6
December 17th, 2010 04:37 PM
perro
Brakes/Hydraulic Systems
4
September 3rd, 2007 01:30 PM