Greetings!

So, I've had my beautiful orange '72 Cutty for about 12 hours now.

I spent the day burning a tank full of last years gas and returning nods and smiles from all the onlookers.

I get it home and apparently I've put a small scratch in the top of the door with my watchband.

Appears to be the clear coat...


Any products recommended to try to buff it out?


Thanks for any input!

 

this is a older post but if the clear is not down to the base or very close wet sand 1500 2000 gently and polish. 2. single stage wet sand 1500 to 2000 and polish. 3. jagged deep cut 1500 to 2000 a larger area 600 to 1000 jagged edge and get the correct paint plus clear coat use a block period for both and wet sand when totally dry or maybe a week wet sand 2000 again lightly blocked until pretty smooth on new paint and polish.