C Heads
Thread Starter
Registered User
Joined: Aug 2010
Posts: 970
From: Southington,Connecticut
C Heads
Got a set of C heads that I might e selling. The numbers on them are as follows 394 548 299, can someone tell me what year? What they came off? Large or small head?
The heads had the following done:
Magnafluxed
Resurfaced
8 new exhaust valves
8 new intake valves
8 new exhaust seats
16 new valve seals
8 new intake seats
5 new guides
Had A.I.R bumps ground down
Complete valve job
Mark CutlassEFI supplied all the springs and hardware
Ill throw in a set of chrome tall stamped Steele valve covers
They have a set of harland sharp S50026A roller rockers 1.6 ratio
Ill take the roller rockers off if you don't want them
$650 for the heads and rockers
These heads are ready to go
Bare with me I've never shipped anything his big/heavy
The heads had the following done:
Magnafluxed
Resurfaced
8 new exhaust valves
8 new intake valves
8 new exhaust seats
16 new valve seals
8 new intake seats
5 new guides
Had A.I.R bumps ground down
Complete valve job
Mark CutlassEFI supplied all the springs and hardware
Ill throw in a set of chrome tall stamped Steele valve covers
They have a set of harland sharp S50026A roller rockers 1.6 ratio
Ill take the roller rockers off if you don't want them
$650 for the heads and rockers
These heads are ready to go
Bare with me I've never shipped anything his big/heavy
Last edited by Stevec; Oct 20, 2013 at 02:25 PM.
Registered User
Joined: Oct 2010
Posts: 1,213
From: Dover, Ohio
Got a set of C heads that I might e selling. The numbers on them are as follows 394 548 299, can someone tell me what year? What they came off? Large or small head?
The heads had the following done:
Magnafluxed
Resurfaced
8 new exhaust valves
8 new intake valves
8 new exhaust seats
16 new valve seals
8 new intake seats
5 new guides
Had A.I.R bumps ground down
Complete valve job
Mark CutlassEFI supplied all the springs and hardware
Ill throw in a set of chrome tall stamped Steele valve covers
They have a set of harland sharp S50026A roller rockers 1.6 ratio
Ill take the roller rockers off if you don't want them
$850 obo for the heads and rockers
$650 obo for the heads
These heads are ready to go
Bare with me I've never shipped anything his big/heavy
The heads had the following done:
Magnafluxed
Resurfaced
8 new exhaust valves
8 new intake valves
8 new exhaust seats
16 new valve seals
8 new intake seats
5 new guides
Had A.I.R bumps ground down
Complete valve job
Mark CutlassEFI supplied all the springs and hardware
Ill throw in a set of chrome tall stamped Steele valve covers
They have a set of harland sharp S50026A roller rockers 1.6 ratio
Ill take the roller rockers off if you don't want them
$850 obo for the heads and rockers
$650 obo for the heads
These heads are ready to go
Bare with me I've never shipped anything his big/heavy
Registered User
Joined: Dec 2010
Posts: 1,580
From: Las Vegas, NV
Has this pair always been together?
Are they both "299"? (October 26th) 10/26 was a Wednesday in '66 / Thursday in '67 & Saturday in '68, I'm not sure I've seen a Saturday casting date.
Are they both large or small heat crossover?
Is there a stamped engine unit number on the end of one of the heads?
Are they both "299"? (October 26th) 10/26 was a Wednesday in '66 / Thursday in '67 & Saturday in '68, I'm not sure I've seen a Saturday casting date.
Are they both large or small heat crossover?
Is there a stamped engine unit number on the end of one of the heads?
Thread Starter
Registered User
Joined: Aug 2010
Posts: 970
From: Southington,Connecticut
I bought them a year ago and was told they were large valve,yes they are both 299 and they are both small heat cross overs. Just wanted to know as much as possible in case someone wants to buy them.
Thread
Thread Starter
Forum
Replies
Last Post
