Rebuilt 455 video
October 18th, 2011, 08:14 PM
#1
Navy P-3 FE (Ret.)
Thread Starter
Join Date: Dec 2009
Location: Great Mills, MD
Posts: 759
Rebuilt 455 video
Just a short drive by. Video quality not up to par but the sound is there.
http://www.youtube.com/watch?v=iTxf8CBHxfI
http://www.youtube.com/watch?v=iTxf8CBHxfI
October 19th, 2011, 05:34 AM
#5
Navy P-3 FE (Ret.)
Thread Starter
Join Date: Dec 2009
Location: Great Mills, MD
Posts: 759
Here's a link to the build.
https://classicoldsmobile.com/forums...p-rebuild.html
A friend was in my backyard and the camera didn't know what to focus on. Got to record a better vid. Always curious what the car sounded like from the outside.
https://classicoldsmobile.com/forums...p-rebuild.html
A friend was in my backyard and the camera didn't know what to focus on. Got to record a better vid. Always curious what the car sounded like from the outside.
October 19th, 2011, 01:51 PM
#8
same but different
Join Date: Jun 2007
Location: Central Missouri
Posts: 2,861
October 19th, 2011, 03:42 PM
#9
Navy P-3 FE (Ret.)
Thread Starter
Join Date: Dec 2009
Location: Great Mills, MD
Posts: 759
October 19th, 2011, 04:05 PM
#11
Navy P-3 FE (Ret.)
Thread Starter
Join Date: Dec 2009
Location: Great Mills, MD
Posts: 759
October 20th, 2011, 02:24 PM
#16
Registered User
Join Date: Jul 2011
Location: Indianapolis, IN
Posts: 473
Oh man this is ironic! I found your video "1967 Olds 442 with 455" and i loved it, watched it again and again cause its pretty much exactly the same build i was planning for my 455 only yours was bored out and mine would be stock. I had no idea you had a profile here! Thats awesome haha. Do you have any power specs on it? Hows the Voodoo cam? Thats the main thing i was looking for when i found your video, wanted to know a general idea of what my car might sound like with the 60805 cam. Also is this manual or auto?
October 20th, 2011, 02:28 PM
#17
Just an Olds Guy
Join Date: Jul 2008
Location: Edmonton, AB. And "I am Can 'eh' jun - eh"
Posts: 24,525
October 20th, 2011, 06:59 PM
#18
Navy P-3 FE (Ret.)
Thread Starter
Join Date: Dec 2009
Location: Great Mills, MD
Posts: 759
Oh man this is ironic! I found your video "1967 Olds 442 with 455" and i loved it, watched it again and again cause its pretty much exactly the same build i was planning for my 455 only yours was bored out and mine would be stock. I had no idea you had a profile here! Thats awesome haha. Do you have any power specs on it? Hows the Voodoo cam? Thats the main thing i was looking for when i found your video, wanted to know a general idea of what my car might sound like with the 60805 cam. Also is this manual or auto?
October 21st, 2011, 01:16 PM
#20
Texas Jim
Join Date: Aug 2009
Location: Killeen, Texas
Posts: 437
Yes, ofcourse the car sounds great, but I want to thank you for your time in service to our country. I did 2 tours, from just prior to the end of Viet Nam. Was w/ the 1/17th. Air Cav, 82d Airborne Div.. I can appreciate your job and service. I think the car is a good representation/symbol of your service. Thanks again.
October 22nd, 2011, 10:32 AM
#21
Navy P-3 FE (Ret.)
Thread Starter
Join Date: Dec 2009
Location: Great Mills, MD
Posts: 759
Another video. Added footage to one already posted.
http://www.youtube.com/watch?v=flqj2iLbTDg
Texas Jim, Thanks for the comment.
http://www.youtube.com/watch?v=flqj2iLbTDg
Texas Jim, Thanks for the comment.
October 22nd, 2011, 12:00 PM
#22
Registered User
Join Date: Jul 2011
Location: Indianapolis, IN
Posts: 473
The video you mention is before I had spun a rod bearing. I've rebuilt since then using the same parts except for Harland Sharp rockers with 1.7:1 ratio which bumps the lift of the cam. The other videos are of the rebuild. I don't have any power specs, engine wasn't dyno'd. Guesstimate 480ish hp and 500 tq maybe. The car is an automatic and I removed the power brakes and steering just to make things less complicated. I like the cam for sure. Good luck with yours. I had watched a video from another Olds guy that turned me on to the SpinTech mufflers.
Thats awesome, crazy mean sounding car especially while running an auto with a full exhaust. Im still considering that cam, might go a step or so smaller though for the torque. sounds awesome. You should post a video of it ideling while its in drive
Thread
Thread Starter
Forum
Replies
Last Post
c-towndave
Small Blocks
15
January 9th, 2015 05:09 PM
brandon reynolds
Parts For Sale
3
April 10th, 2012 12:06 PM
kylem4711
Cars For Sale
5
December 19th, 2007 02:53 PM
