Help Badley need a fill tube off a slim trans. Olds 1962- 88 .

 

let me know if you still need fill tube , i'll check see if mine is still in truck of mine I swaped my slim jim foe a 350 chevy

 

Would you check to see if you have a filler tube. Sorry for getting back to this late.

 

ok will do , the trans shop said they put all parts in trunk . Haven't gone there and looked yet . Will this weekend

 

here's what I have , let me know if and what part you need , Tube and holding bracket for tube

 

haven't heard from you , let ne know soon if you still want it , Thanks

 

I did reply but you must have not got it, anyway i got one. thank you for come back.

 

Great ,

 

Where did you pur hase an adapter kit for the conversion?

 

I got mine from Ross Racing in Ohio ,heres some post to look at https://classicoldsmobile.com/forums...lim-jim-17372/
https://classicoldsmobile.com/forums...2-olds-162113/ if you look up KQQLCAT they did a Ross Racing swap but to a 61 olds they said it was fairly easy . mine was done to a 62 olds very different and much harder . is not cheap but had no choice after 2 rebuilds on the slim jim could not get parts and nobody in my area know how to fix it , hope this helps

 

'61 and '62 full size cars use the same engine, transmission, engine/trans mounting and floor sheet metal. I don't understand what could be so different that the conversion would be so difficult - not that it's an easy conversion to begin with. If it was easy I'd have mine done by now.

 

The frame is different which changes the installation, on the 62 you have to make a new crossmember ,believe me I found out the hard way , research it , I think there’s a 4 inch difference in the frames ,