Head numbers and difference - ClassicOldsmobile.com

Tech Editor's Desk Projects, papers, writings, thoughts, musings of our technical editor Joe Padavano. To begin with, he will be making threads and can approve posts to it if he wishes. This can be changed in the future if it does not work out well.

Head numbers and difference

Old June 10th, 2014, 08:54 AM
  #1  
Registered User
Thread Starter
 
Join Date: May 2014
Posts: 4
Head numbers and difference

I just finished rebuilding a 350 out of a 1969 Olds but I could not afford at this time to have the heads redone. The original heads were stamped with a 6 and the heads I used which I new to be in good shape are stamped 3A. Could someone inform me which heads are better. I will eventually have the original heads redone but I am just curious what the performance difference may be. Thanks
777rickr is offline  
Old June 10th, 2014, 09:33 AM
  #2  
Registered User
 
Join Date: Dec 2011
Posts: 7,286
The 3A heads are lighter castings, lots of meat trimmed out. I don't think they hold up as well against say overheating, based on the junked engines I have seen. If they have not been abused, they should be serviceable. Probably a chamber size difference, but not sure if it's negligible- not many folks mess with the 3A and up era heads. The valves might be expected to be smaller on the smog era 3A head, but they would still be serviceable. 3A heads probably have rotators on all valves.

Beware of the use of pushrods with 3/8 ***** on the smog era engines- you want to make sure that the pushrod ***** are the same size as the lifter cups and the rocker receptacles.
Octania is offline  
Old June 11th, 2014, 07:38 AM
  #3  
Registered User
Thread Starter
 
Join Date: May 2014
Posts: 4
I did use the pushrods that went with the 3A heads just to be on the safe side but as far as I could tell they were the same, got the engine done and put in and it runs great just need to get a different carb or try to rebuild the quadrajet 4 bbl. idle circuit is not to good, from what I can tell the floats might need adjusted, off idle is smooth and strong. Thanks for sharing your knowledge.
777rickr is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
rctoyguy
Vintage Oldsmobiles
15
March 1st, 2014 12:45 PM
Johnd
Body work
4
January 10th, 2012 04:43 AM
CLcutlass
Big Blocks
7
August 21st, 2011 06:25 PM
jabba
Big Blocks
1
October 30th, 2008 06:46 AM
millwrightrice
Small Blocks
2
July 13th, 2007 08:24 PM


Thread Tools
Search this Thread
Quick Reply: Head numbers and difference


Archive Advertising Cookie Policy Privacy Statement Terms of Service

© 2019 MH Sub I, LLC dba Internet Brands

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.