Tech Editor's Desk Projects, papers, writings, thoughts, musings of our technical editor Joe Padavano. To begin with, he will be making threads and can approve posts to it if he wishes. This can be changed in the future if it does not work out well.

'65 442 Air Cleaner Issues

Thread Tools
 
Search this Thread
 
Old May 11, 2016 | 03:32 PM
  #1  
777stickman's Avatar
Thread Starter
Registered User
 
Joined: May 2013
Posts: 28
From: Maybe, CA
'65 442 Air Cleaner Issues

About a year ago I replaced the stock 4GC (not original dammit and it was giving me fits) with a Street Demon. Very nice carb, minor install mods and easy to tune.

The issue is with the '65 air cleaner base. The 4GC has a smaller throat size than the later Q-Jets, Holleys, Demon"s, etc. The aftermarket base I used is 1 1/2" smaller in OD than the lid. Consequently there is more engine heat going down the carb than I would like. Been running it this way for over a year with no real issues, but would like to somehow seal it up for a cooler intake air temp and better suck for the blow-by gasses.

Is there a base out there that has the Q-Jet throat size that will fit the original '65 442 lid which has a (EDIT) 17 5/8" OD and correct size filter?

Thanks.............Steve
Attached Images
File Type: jpg
DSC01218.JPG (315.3 KB, 47 views)
File Type: jpg
DSC01219.JPG (317.9 KB, 45 views)
File Type: jpg
DSC01220.JPG (323.9 KB, 45 views)
File Type: jpg
DSC01221.JPG (321.1 KB, 50 views)

Last edited by 777stickman; May 14, 2016 at 02:53 PM.
Old May 11, 2016 | 03:47 PM
  #2  
oldcutlass's Avatar
Administrator
 
Joined: Oct 2009
Posts: 42,478
From: Poteau, Ok
Why not modify your original base to fit the new carb? Or fabricate a ring to go around the new base to fill the opening.
Old May 11, 2016 | 05:34 PM
  #3  
joe_padavano's Avatar
Old(s) Fart
 
Joined: Mar 2007
Posts: 50,771
From: Northern VA
The 1966 and 67 cars used Qjets with a similar air cleaner. One of those bases should work.
Old May 12, 2016 | 04:23 PM
  #4  
777stickman's Avatar
Thread Starter
Registered User
 
Joined: May 2013
Posts: 28
From: Maybe, CA
Originally Posted by joe_padavano
The 1966 and 67 cars used Qjets with a similar air cleaner. One of those bases should work.
Thanks Joe: I checked and all 3 years use the same filter element. Would you happen to have a base laying around??
Old May 12, 2016 | 04:52 PM
  #5  
lemoldsnut's Avatar
Registered User
 
Joined: Nov 2008
Posts: 3,345
From: Redmond, Oregon
Pretty sure I have it.

just sent PM
Old May 14, 2016 | 03:05 PM
  #6  
777stickman's Avatar
Thread Starter
Registered User
 
Joined: May 2013
Posts: 28
From: Maybe, CA
Originally Posted by oldcutlass
Why not modify your original base to fit the new carb? Or fabricate a ring to go around the new base to fill the opening.
Not going to modify the original base just because it's original. If I did try that I'd probably need some of the suitable explosives you mention!! The ring thing maybe my only other option if I can't find a suitable base...............Thanks

Last edited by 777stickman; May 14, 2016 at 03:21 PM.
Old May 14, 2016 | 03:16 PM
  #7  
777stickman's Avatar
Thread Starter
Registered User
 
Joined: May 2013
Posts: 28
From: Maybe, CA
Can someone measure the bottom OD of their 66--67 442 chrome single snorkel air cleaner lid for me?

My 65 lid OD is 17 1/2" and the base OD is 17 5/8". Just need to know for sure if a 66--67 442 base will work for my project in the original thread.

Thanks............Steve
Old May 14, 2016 | 03:29 PM
  #8  
lemoldsnut's Avatar
Registered User
 
Joined: Nov 2008
Posts: 3,345
From: Redmond, Oregon
It's correct as I pictured to you.

Larry
Old Jun 1, 2016 | 04:17 PM
  #9  
777stickman's Avatar
Thread Starter
Registered User
 
Joined: May 2013
Posts: 28
From: Maybe, CA
Originally Posted by joe_padavano
The 1966 and 67 cars used Qjets with a similar air cleaner. One of those bases should work.
Another thank you Joe. Your "should work" needs to be "will work". Picked up a '67 442 lid & base. Obviously I can't use the '67 lid on my '65, but the base was a perfect fit for my project.

Again.........THANK YOU!!!

Last edited by 777stickman; Jun 1, 2016 at 04:23 PM.
Old Jun 2, 2016 | 04:40 PM
  #10  
therobski's Avatar
Registered User
 
Joined: Jul 2009
Posts: 3,190
From: Dallas-Fort Worth
Should turn out like this...( without the snorkel) Good job guys! Question 65's with a 4-speed did not have a snorkel air cleaner correct?
Attached Images
File Type: jpg
IMG_3548.JPG (82.0 KB, 23 views)
Old Jun 2, 2016 | 06:40 PM
  #11  
777stickman's Avatar
Thread Starter
Registered User
 
Joined: May 2013
Posts: 28
From: Maybe, CA
Originally Posted by therobski
Should turn out like this...( without the snorkel) Good job guys! Question 65's with a 4-speed did not have a snorkel air cleaner correct?
I'll probably get reamed for this, but. I'm pretty sure all 65's had the snorkel. I think the open air cleaner came to be with the 67 4 speed, although my Fremont built 67 442 4 speed came with a snorkel??
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Bernhard
General Questions
40
Aug 6, 2021 04:21 AM
BeenThere
Parts For Sale
3
Sep 20, 2015 07:47 AM
69CutlassAlex
General Discussion
7
Dec 2, 2011 08:01 AM
dan1s
Parts For Sale
0
Apr 17, 2010 08:14 AM
Viper
Parts Wanted
0
Aug 13, 2008 10:58 AM




All times are GMT -7. The time now is 12:09 PM.